EN 17151:2019
(Main)Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes
This document specifies a test method for determining the long-term compression strength for a specified period on boxes made of thermoplastics materials for non-pressure underground conveyance and storage of non-potable water.
The document is applicable for boxes which maintain their linear behaviour over the specified period.
Kunststoff-Rohrleitungssysteme für die drucklose unterirdische Entwässerung für Nicht-Trinkwasser - Prüfverfahren zur Bestimmung der Langzeitdruckfestigkeit von Versickerungsblöcken
Dieses Dokument legt ein Prüfverfahren zur Bestimmung der Langzeitdruckfestigkeit für eine festgelegte Dauer an Versickerungsblöcken aus thermoplastischen Werkstoffen für die drucklose unterirdische Entwässerung und Speicherung von Nicht-Trinkwasser fest.
Das Dokument gilt für Versickerungsblöcke, die ihr lineares Verhalten über die festgelegte Dauer beibehalten.
Systèmes de canalisations en plastique pour le transport et le stockage souterrains sans pression de l’eau non potable - Méthode d’essai pour la détermination de la résistance à la compression à long terme des structures alvéolaires ultra-légères
Le présent document spécifie une méthode d’essai pour déterminer la résistance à la compression à long terme des SAUL fabriquées à partir de matières thermoplastiques pour le transport et le stockage souterrains sans pression de l’eau non potable.
Le présent document s’applique aux SAUL qui conservent leur comportement linéaire pendant la période spécifiée.
Cevni sistemi iz polimernih materialov, ki delujejo po težnostnem principu in so položeni v zemljo, za transport in shranjevanje vode, ki ni namenjena pitju - Preskusna metoda za ugotavljanje dolgotrajne tlačne odpornosti zabojev
Ta dokument določa preskusno metodo za ugotavljanje dolgotrajne tlačne odpornosti konstrukcijskih zabojev iz termoplastičnih materialov za določen čas, ki delujejo po težnostnem principu in so položeni v zemljo, za transport in shranjevanje vode, ki ni namenjena pitju.
Dokument se uporablja tudi za zaboje, ki v določenem obdobju ohranjajo svoje linearne lastnosti.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17151:2019
01-oktober-2019
Cevni sistemi iz polimernih materialov, ki delujejo po težnostnem principu in so
položeni v zemljo, za transport in shranjevanje vode, ki ni namenjena pitju -
Preskusna metoda za ugotavljanje dolgotrajne tlačne odpornosti zabojev
Plastics piping systems for non-pressure underground conveyance and storage of non-
potable water - Test method for determination of long-term compression strength of
boxes
Kunststoff-Rohrleitungssysteme für die drucklose unterirdische Entwässerung für Nicht-
Trinkwasser - Prüfverfahren zur Bestimmung der Langzeitdruckfestigkeit von
Versickerungsblöcken
Systèmes de canalisations en plastique pour le transport et le stockage souterrains sans
pression de l’eau non potable - Méthode d’essai pour la détermination de la résistance à
la compression à long terme des structures alvéolaires ultra-légères
Ta slovenski standard je istoveten z: EN 17151:2019
ICS:
23.040.03 Cevovodi za zunanje sisteme Pipeline and its parts for
transporta vode in njihovi deli external water conveyance
systems
SIST EN 17151:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17151:2019
---------------------- Page: 2 ----------------------
SIST EN 17151:2019
EN 17151
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2019
EUROPÄISCHE NORM
ICS 23.040.01
English Version
Plastics piping systems for non-pressure underground
conveyance and storage of non-potable water - Test
method for determination of long-term compression
strength of boxes
Systèmes de canalisations en plastique pour le Kunststoff-Rohrleitungssysteme für die drucklose
transport et le stockage souterrains sans pression de unterirdische Entwässerung für Nicht-Trinkwasser -
l'eau non potable - Méthode d'essai pour la Prüfverfahren zur Bestimmung der
détermination de la résistance à la compression à long Langzeitdruckfestigkeit von Versickerungsblöcken
terme des structures alvéolaires ultra-légères
This European Standard was approved by CEN on 19 October 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17151:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17151:2019
EN 17151:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and units . 6
5 Test method . 7
6 Apparatus .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.