EN ISO 23402-3:2024
(Main)Dentistry - Portable dental equipment for use in non-permanent healthcare environment - Part 3: Portable suction equipment (ISO 23402-3:2024)
Dentistry - Portable dental equipment for use in non-permanent healthcare environment - Part 3: Portable suction equipment (ISO 23402-3:2024)
This document specifies terminology, classification, requirements and test methods for portable suction equipment primarily intended to be used by dental professionals in non-permanent healthcare environments.
This document applies to portable suction equipment incorporated in a portable dental unit and free-standing portable suction equipment.
The requirements in this document focus on portability.
This document specifies requirements for information to be supplied by the manufacturer on the performance, operation and maintenance of portable suction equipment designed and constructed to be transported for use in non-permanent healthcare environments. This document also specifies requirements for the instructions to be supplied by the manufacturer on assembling, disassembling and packing for human transport between non-permanent healthcare environments.
This document does not apply to stationary dental equipment, wearable equipment (such as headlamps and loupes), mobile dental equipment or portable dental equipment that is not intended to be used in non-permanent healthcare environments or not designed to be disassembled, folded or packed for human transport between non-permanent healthcare environments. Also, requirements for stationary dental equipment that can be installed in a dental mobile medical facility (e.g. vehicular or containerized mobile dental clinic) are not considered in this document.
This document specifies requirements for portable suction equipment used to provide reduced pressure and flow at the cannula connector.
This document does not apply to portable suction equipment used for life support or for scavenging halogenated anaesthetic gases.
Zahnheilkunde - Tragbare dentale Ausrüstung zur Anwendung in nicht-dauerhaften Gesundheitseinrichtungen - Teil 3: Tragbare Absauggeräte (ISO 23402-3:2024)
Médecine bucco-dentaire - Matériel dentaire portatif utilisable dans des environnements de soins de santé non permanents - Partie 3: Matériel d’aspiration portatif (ISO 23402-3:2024)
Le présent document spécifie la terminologie, la classification, les exigences et les méthodes d’essai applicables au matériel d’aspiration portatif principalement destiné à être utilisé par des dentistes dans des environnements de soins de santé non permanents.
Le présent document s’applique au matériel d’aspiration portatif intégré dans un unit dentaire portatif et dans le matériel d’aspiration portatif sur pied.
Les exigences spécifiées dans le présent document concernent la portabilité.
Le présent document spécifie les exigences relatives aux informations à fournir par le fabricant sur les performances, le fonctionnement et l’entretien du matériel d’aspiration portatif conçu et fabriqué pour être transporté pour être utilisé dans des environnements de soins de santé non permanents. Le présent document spécifie également les exigences relatives aux instructions à fournir par le fabricant sur l’assemblage, le démontage et l’emballage pour être transporté par des hommes entre des environnements de soins de santé non permanents.
Le présent document ne s’applique pas au matériel dentaire fixe, au matériel de poche (tel que les lampes frontales et les loupes), le matériel dentaire mobile ou le matériel dentaire portatif qui n’est pas destiné à être utilisé dans des environnements de soins de santé non permanents ou qui n’est pas conçu pour être démonté, plié ou rangé pour être transporté par des hommes entre des environnements de soins de santé non permanents. De plus, les exigences relatives au matériel dentaire fixe qui peut être installé dans un établissement médical dentaire mobile (par exemple, clinique dentaire mobile dans un véhicule ou un conteneur) ne sont pas abordées dans le présent document.
Le présent document spécifie les exigences applicables au matériel d’aspiration portatif utilisé pour fournir une pression et un débit réduits au niveau de raccord de canule.
Le présent document ne s’applique pas au matériel d’aspiration portatif utilisé pour le maintien artificiel des fonctions vitales ou pour l’évacuation des gaz anesthésiques halogénés.
Zobozdravstvo - Prenosna dentalna oprema za začasno zdravstveno oskrbo - 3. del: Prenosna sukcijska (aspiracijska) oprema (ISO 23402-3:2024)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 23402-3:2024
01-julij-2024
Zobozdravstvo - Prenosna dentalna oprema za začasno zdravstveno oskrbo - 3.
del: Prenosna sukcijska (aspiracijska) oprema (ISO 23402-3:2024)
Dentistry - Portable dental equipment for use in non-permanent healthcare environment -
Part 3: Portable suction equipment (ISO 23402-3:2024)
Zahnheilkunde - Tragbare dentale Ausrüstung zur Anwendung in nicht-dauerhaften
Gesundheitseinrichtungen - Teil 3: Tragbare Absauggeräte (ISO 23402-3:2024)
Médecine bucco-dentaire - Matériel dentaire portatif utilisable dans des environnements
de soins de santé non permaments - Partie 3: Matériel d’aspiration portatif (ISO 23402-
3:2024)
Ta slovenski standard je istoveten z: EN ISO 23402-3:2024
ICS:
11.060.20 Zobotehnična oprema Dental equipment
SIST EN ISO 23402-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 23402-3:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 23402-3:2024
EN ISO 23402-3
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 11.060.20
English Version
Dentistry - Portable dental equipment for use in non-
permanent healthcare environment - Part 3: Portable
suction equipment (ISO 23402-3:2024)
Médecine bucco-dentaire - Matériel dentaire portatif Zahnheilkunde - Tragbare dentale Ausrüstung zur
utilisable dans des environnements de soins de santé Anwendung in nicht-dauerhaften
non permanents - Partie 3: Matériel d'aspiration Gesundheitseinrichtungen - Teil 3: Tragbare
portatif (ISO 23402-3:2024) Absauggeräte (ISO 23402-3:2024)
This European Standard was approved by CEN on 22 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23402-3:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 23402-3:2024
EN ISO 23402-3:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 23402-3:2024
EN ISO 23402-3:2024 (E)
European foreword
This document (EN ISO 23402-3:2024) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2024, and conflicting national standards
shall be withdrawn at the latest by November 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Irelan
...
SLOVENSKI STANDARD
oSIST prEN ISO 23402-3:2023
01-junij-2023
Zobozdravstvo - Prenosna dentalna oprema za začasno zdravstveno oskrbo - 3.
del: Prenosna sukcijska (aspiracijska) oprema (ISO/DIS 23402-3:2023)
Dentistry - Portable dental equipment for use in non-permanent healthcare environment -
Part 3: Portable suction equipment (ISO/DIS 23402-3:2023)
Zahnheilkunde - Tragbare dentale Ausrüstung zur Anwendung in nicht-dauerhaften
Gesundheitseinrichtungen - Teil 3: Tragbare Absauggeräte (ISO/DIS 23402-3:2023)
Médecine bucco-dentaire - Matériel dentaire portatif utilisable dans des environnements
de soins de santé non permaments - Partie 3: Matériel d’aspiration portatif (ISO/DIS
23402-3:2023)
Ta slovenski standard je istoveten z: prEN ISO 23402-3
ICS:
11.060.20 Zobotehnična oprema Dental equipment
oSIST prEN ISO 23402-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 23402-3:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 23402-3:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 23402‐3
ISO/TC 106/SC 6 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-03-13 2023-06-05
Dentistry — Portable dental equipment for use in non‐
permanent healthcare environment —
Part 3:
Portable suction equipment
ICS: 11.060.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 23402-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 23402-3:2023
ISO/DIS 23402-3:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 23402‐3
ISO/TC 106/SC 6 Secretariat: DIN
Voting begins on: Voting terminates on:
Dentistry — Portable dental equipment for use in non‐
permanent healthcare environment —
Part 3:
Portable suction equipment
ICS: 11.060.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 23402-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 23402-3:2023
ISO/DIS 23402‐3:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.