Optical fibre cables - Part 1-312: Generic specification - Basic optical cable test procedures - Cable element test methods - Elongation test for buffer tubes at low temperature, Method G11B (IEC 60794-1-312:2024)

IEC 60794-1-312: 2024 describes test procedures to be used in establishing uniform requirements of optical fibre cable elements for the mechanical property – tensile strength and elongation at low temperature. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc.
This document partially cancels and replaces method G11B of IEC 60794-1-23:2019. This edition includes the following significant technical changes with respect to IEC 60794‑1‑23:2019:
a) alignment of the title with the content of the method.

Lichtwellenleiterkabel - Teil 1-312: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Prüfverfahren für Kabelelemente - Dehnungsprüfung für Ummantelungen bei niedrigen Temperaturen, Verfahren G11B (IEC 60794-1-312:2024)

Câbles à fibres optiques - Partie 1-312: Spécification générique - Procédures fondamentales d’essai des câbles optiques - Méthodes d’essais d'environnement - Essai d’allongement des tubes à basse température, Méthode G11B (IEC 60794-1-312:2024)

IEC 60794-1-312: 2024 décrit les procédures d’essai à utiliser afin d'établir des exigences uniformes applicables aux caractéristiques mécaniques des éléments de câbles à fibres optiques – Résistance à la traction et allongement à basse température. Le présent document s’applique aux câbles à fibres optiques destinés à être utilisés dans les équipements de télécommunications et les dispositifs utilisant des techniques analogues, ainsi qu'aux câbles constitués à la fois de fibres optiques et de conducteurs électriques. Dans tout le document, l'expression "câble optique" peut également inclure des assemblages de fibres optiques, des assemblages de fibres pour microconduits, etc. Ce document annule et remplace partiellement la méthode G11B de l'IEC 60794-1-23:2019. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’IEC 60794‑1‑23:2019:
a) alignement du titre sur le contenu de la méthode.

Optični kabli - 1-312. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Preskusne metode za kabelske elemente - Preskus raztezka za puferske cevi pri nizki temperaturi, metoda G11B (IEC 60794-1-312:2024)

Standard IEC 60794-1-312: 2024 opisuje preskusne postopke, ki jih je treba uporabiti pri določanju enotnih zahtev glede elementov optičnih kablov za mehansko lastnost – natezna trdnost in raztezek do pretrga. Ta dokument se uporablja za optične kable za uporabo s telekomunikacijsko opremo in napravami, ki uporabljajo podobne tehnike, ter kable s kombinacijo optičnih vlaken in električnih vodnikov. V tem dokumentu lahko besedna zveza »optični kabel« zajema tudi optične enote, mikrokanale itd.
Ta dokument delno razveljavlja in nadomešča metodo G11B iz standarda IEC 60794-1-23:2019. Ta izdaja v primerjavi s standardom IEC 60794-1-23:2019 vključuje naslednje pomembne tehnične spremembe:
a) uskladitev naslova z vsebino metode.

General Information

Status
Published
Public Enquiry End Date
19-May-2022
Publication Date
19-Mar-2024
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
20-Mar-2024
Due Date
25-May-2024
Completion Date
20-Mar-2024

Relations

Buy Standard

Standard
EN IEC 60794-1-312:2024
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60794-1-312:2024
01-maj-2024
Optični kabli - 1-312. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Preskusne metode za kabelske elemente - Preskus raztezka za
puferske cevi pri nizki temperaturi, metoda G11B (IEC 60794-1-312:2024)
Optical fibre cables - Part 1-312: Generic specification - Basic optical cable test
procedures - Cable element test methods - Elongation test for buffer tubes at low
temperature, Method G11B (IEC 60794-1-312:2024)
Lichtwellenleiterkabel - Teil 1-312: Fachgrundspezifikation - Grundlegende Prüfverfahren
für Lichtwellenleiterkabel - Prüfverfahren für Kabelelemente - Dehnungsprüfung für
Ummantelungen bei niedrigen Temperaturen, Verfahren G11B (IEC 60794-1-312:2024)
Câbles à fibres optiques - Partie 1-312: Spécification générique - Procédures
fondamentales d’essai des câbles optiques - Méthodes d’essais d'environnement - Essai
d’allongement des tubes à basse température, Méthode G11B (IEC 60794-1-312:2024)
Ta slovenski standard je istoveten z: EN IEC 60794-1-312:2024
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
SIST EN IEC 60794-1-312:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60794-1-312:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 60794-1-312:2024


EUROPEAN STANDARD EN IEC 60794-1-312

NORME EUROPÉENNE

EUROPÄISCHE NORM March 2024
ICS 33.180.10 Supersedes EN IEC 60794-1-23:2019 (partially)
English Version
Optical fibre cables - Part 1-312: Generic specification - Basic
optical cable test procedures - Cable element test methods -
Elongation test for buffer tubes at low temperature, Method
G11B
(IEC 60794-1-312:2024)
Câbles à fibres optiques - Partie 1-312: Spécification Lichtwellenleiterkabel - Teil 1-312: Fachgrundspezifikation -
générique - Procédures fondamentales d'essai des câbles Grundlegende Prüfverfahren für Lichtwellenleiterkabel -
optiques - Méthodes d'essais d'environnement - Essai Prüfverfahren für Kabelelemente - Dehnungsprüfung für
d'allongement des tubes à basse température, Méthode Ummantelungen bei niedrigen Temperaturen, Verfahren
G11B G11B
(IEC 60794-1-312:2024) (IEC 60794-1-312:2024)
This European Standard was approved by CENELEC on 2024-03-06. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60794-1-312:2024 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60794-1-312:2024
EN IEC 60794-1-312:2024 (E)
European foreword
The text of document 86A/2395/FDIS, future edition 1 of IEC 60794-1-312, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-312:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-12-06
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-03-06
document have to be withdrawn
This document partially supersedes EN IEC 60794-1-23:2019 and all of its amendments and
corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national commit
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.