SIST EN 17015-1:2024
(Main)Electronic Public Procurement - Catalogue - Part 1: Choreographies
Electronic Public Procurement - Catalogue - Part 1: Choreographies
This document provides specifications on business processes for exchanging an electronic product catalogues (“catalogues”) as part of the business processes in the post-award area and pre-award area (partially), so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification:
• Processes for submitting catalogues from the selling to the buying side;
• Processes for submitting catalogue-related data as part of tendering processes.
Transaction used in the specified choreographies are out of scope. These transactions are specified in the related transaction specification on “Catalogue Transactions”.
Elektronisches öffentliches Beschaffungswesen - Katalog - Teil 1: Choreographien
Dieses Dokument enthält Choreographiespezifikationen für den Austausch eines elektronischen Produktkata
logs („Kataloge“) im Rahmen der Geschäftsprozesse vor und nach der Vergabe, sodass Kataloge als Grundlage für Bestellungen sowie für die Beurteilung von Angeboten dienen können. Die von dieser
zifikation abgedeckten zentralen Aspekte sind:
- Prozesse zur Übermittlung von Katalogen von der Verkäufer- zur Käuferseite;
- Prozesse zur Übermittlung von katalogbezogenen Daten im Rahmen eines Angebotsprozesses;
- Prozesse zur Integration von Beschaffungssystemen auf der Verkäuferseite.
In den festgelegten Choreographien verwendete Transaktionen liegen außerhalb des Anwendungsbereichs. Diese Transaktionen sind in der einschlägigen prEN17015-2: -1 festgelegt. Die Beziehung zwischen den Cho
reographien und der Transaktion ist in Abschnitt8 beschrieben.
Der Identifikator dieses Choreographiendokuments ist prEN17015-1:-1.
Wie die Konformität mit dieser Choreographie beansprucht wird, ist im Abschnitt „Beanspruchung der Kon
formität“ jeder Choreographie beschrieben.
Passation électronique des marchés publics - Catalogue - Partie 1 : Chorégraphies
Le présent document fournit des spécifications concernant les chorégraphies utilisées pour échanger des catalogues de produits électroniques dans le cadre de procédures commerciales, que ce soit dans le domaine de la pré-adjudication ou de la post-adjudication, afin que les catalogues puissent servir de base pour passer des commandes et pour évaluer des offres. Les principaux aspects couverts par cette spécification sur les chorégraphies sont les suivants :
⎯ les procédures de soumission des catalogues tant au niveau du vendeur qu'au niveau de l'acheteur ;
⎯ les procédures de soumission de données relatives au catalogue dans le cadre de procédures d'appel d'offres ;
⎯ les procédures d'intégration des systèmes de passation de marchés du côté du vendeur.
Les transactions utilisées dans des chorégraphies spécifiques ne relèvent pas du présent domaine d'application. Ces transactions sont spécifiées dans le projet de norme prEN 17015-2:-1 associé. La relation entre les chorégraphies et les transactions est décrite à l'Article 8.
Le présent document sur les chorégraphies est identifié par la référence prEN 17015-1:-1.
Le paragraphe « Déclaration de conformité » de chaque chorégraphie indique les critères à respecter pour revendiquer la conformité à cette chorégraphie.
Elektronska javna naročila - Katalog - 1. del: Koreografije
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17015-1:2024
01-junij-2024
Elektronska javna naročila - Katalog - 1. del: Koreografije
Electronic Public Procurement - Catalogue - Part 1: Choreographies
Elektronisches öffentliches Beschaffungswesen - Katalog - Teil 1: Choreographien
Passation électronique des marchés publics - Catalogue - Partie 1 : Chorégraphies
Ta slovenski standard je istoveten z: EN 17015-1:2024
ICS:
03.100.10 Nabava. Dobava. Logistika Purchasing. Procurement.
Logistics
35.240.20 Uporabniške rešitve IT pri IT applications in office work
pisarniškem delu
35.240.63 Uporabniške rešitve IT v IT applications in trade
trgovini
SIST EN 17015-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17015-1:2024
---------------------- Page: 2 ----------------------
SIST EN 17015-1:2024
EN 17015-1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 35.240.63
English Version
Electronic Public Procurement - Catalogue - Part 1:
Choreographies
Passation électronique des marchés publics - Catalogue Elektronisches öffentliches Beschaffungswesen -
- Partie 1 : Chorégraphies Katalog - Teil 1: Choreographien
This European Standard was approved by CEN on 19 February 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17015-1:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17015-1:2024
EN 17015-1:2024 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Symbols and abbreviated terms . 9
5 Business Environment and high-level business requirements . 9
5.1 Choreographies (business) Goals . 9
5.2 Business environment . 10
5.2.1 General. 10
5.2.2 Business context . 10
5.2.3 Positioning in EIRA . 11
5.3 Organization and Business Partners involved . 11
5.4 High-level business process requirements . 12
6 Choreography Catalogue .
...
SLOVENSKI STANDARD
oSIST prEN 17015-1:2023
01-februar-2023
Elektronska javna naročila - Katalog - 1. del: Koreografije
Electronic Public Procurement - Catalogue - Part 1: Choreographies
Elektronisches öffentliches Beschaffungswesen - Katalog - Teil 1: Choreographien
Passation électronique des marchés publics - Catalogue - Partie 1 : Chorégraphies
Ta slovenski standard je istoveten z: prEN 17015-1
ICS:
03.100.10 Nabava. Dobava. Logistika Purchasing. Procurement.
Logistics
35.240.20 Uporabniške rešitve IT pri IT applications in office work
pisarniškem delu
35.240.63 Uporabniške rešitve IT v IT applications in trade
trgovini
oSIST prEN 17015-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17015-1:2023
---------------------- Page: 2 ----------------------
oSIST prEN 17015-1:2023
DRAFT
EUROPEAN STANDARD
prEN 17015-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2022
ICS 35.240.63
English Version
Electronic Public Procurement - Catalogue - Part 1:
Choreographies
Passation électronique des marchés publics - Catalogue Elektronisches öffentliches Beschaffungswesen -
- Partie 1 : Chorégraphies Katalog - Teil 1: Choreographien
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 440.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17015-1:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17015-1:2023
prEN 17015-1:2022 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Business Environment and high-level business requirements . 9
4.1 Choreographies (business) Goals . 9
4.2 Business environment . 9
4.2.1 Introduction . 9
4.2.2 Business context . 9
4.2.3 Positioning in EIRA . 10
4.3 Key roles .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.