2009/48/EC - DIRECTIVE 2009/48/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 June 2009 on the safety of toys

This document specifies requirements and test methods for toy trampolines for domestic use, their access devices and their enclosures, intended for outdoor and/or indoor use by one person at a time.
The scope of this document excludes:
— inclined mat toy trampolines;
— inflatable toy trampolines;
— toy trampolines with additional features, e.g. tents, basketball hoop.
NOTE The document also does not apply to non-toy products such as
— floating inflatable trampolines, covered by the EN ISO 25649 series;
— trampolines used as gymnastic equipment, covered by EN 13219;
— fitness trampolines, including trampolines for medical use;
— trampolines used in public playgrounds, e.g. bouncing facilities according to EN 1176-1.

This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.
NOTE   EN 71-3 and EN 71-12 specify requirements and test methods for finger paints for the migration of certain elements (see Clause F.4) and N-nitrosamines (see Clause F.9).

This document specifies requirements and test methods for toy materials (substances and mixtures) used in chemical toys (sets) other than experimental sets. These substances and mixtures are:
-   those classified as dangerous by the EU legislation applying to dangerous substances and dangerous mixtures [5];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the chemical toy.
NOTE   The terms "substance" and "mixture" are defined in the REACH regulation No. (EC)1907/2006 and in the CLP regulation (EC) No. 1272/2008.
Additionally, requirements are specified for markings, warnings, safety rules, contents list, instructions for use and first aid information.
This document applies to:
-   plaster of Paris (gypsum) moulding sets;
-   oven-hardening plasticised PVC modelling clay sets;
-   polystyrene granules sets;
-   embedding sets;
-   adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents), supplied or recommended in model sets;
-   slime kits.

This proposed TR gives guidance on the requirement for toys which may be a realistic food imitation under the meaning of the prEN 71-1 clause 4.28, in order to assist users of the EN 71-1 standard.
This document is only to assist users in distinguishing whether a toy product that imitates food in some way should be considered a realistic food imitation. It does not address products that are not toys.

This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.
NOTE   EN 71-3 and EN 71-12 specify requirements and test methods for finger paints for the migration of certain elements (see Clause F.4) and N-nitrosamines (see Clause F.9).

This document specifies requirements and test methods for toy trampolines for domestic use, their access devices and their enclosures, intended for outdoor and/or indoor use by one person at a time.
The scope of this document excludes:
-   trampolines used as gymnastic equipment, covered by EN 13219:2008;
-   floating inflatable trampolines, covered by the EN ISO 25649:2017 series;
-   trampolines used in public playgrounds;
-   inclined mat trampolines;
-   inflatable trampolines;
-   fitness trampolines, including trampolines for medical use;
-   trampolines with additional features, e.g. tents, basketball hoop.

This document specifies requirements (content limit) and a test method for certain flame retardants in toy materials.

This document specifies requirements and a test method for migration of bisphenol A from toy materials. This document is applicable to toys intended for use by children under 36 months or other toys intended to be placed in the mouth.
NOTE   The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [3] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.

This document specifies requirements and test methods for determining the concentration of phenol in aqueous toy materials and for migration of phenol from polymeric toy materials. This document is applicable to toys intended for use by children under 36 months or other toys intended to be placed in the mouth.
NOTE   The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [4] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.

This document specifies requirements for formamide in foam toy materials and a test method for determining the content of formamide in foam toy materials. This document is applicable to toys intended for use by children under 36 month or other toys intended to be placed in the mouth.
NOTE 1 The document provides a test method to determine if the total content of formamide in foam toy materials is below the 200 mg/kg cut-off limit. Foam toy materials exceeding this limit are subject to the emission limit specified in Appendix C to Annex II to Directive 2009/48/EC.
NOTE 2 The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [3] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.

This document specifies requirements (content limit) and a test method for isothiazolinones in aqueous toy materials.

This document specifies requirements for the maximum amount, and in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities.
These substances and mixtures are:
-   those classified as hazardous by the EC-legislation applying to hazardous substances and hazardous mixtures [1];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the experimental set.
This document applies to experimental sets for chemistry and related activities including crystal growing sets, carbon dioxide generating experimental sets and supplementary sets. It also covers sets for chemical experiments within the fields of mineralogy, biology, physics, microscopy and environmental science whenever they contain one or more chemical substances and/or mixtures which are classified as hazardous according to Regulation (EC) No. 1272/2008 [1].
This document also specifies requirements for marking, a contents list, instructions for use, eye protection and for the equipment intended for carrying out the experiments.
This document does not apply to combined sets, e.g. a combination of a chemistry set and a crystal growing set. It also does not apply to toys that are covered by EN 71-13 (e.g. cosmetic kits). Requirements for certain other chemical toys are given in EN 71-5.
NOTE   The terms "substance" and "preparation", are used in the "REACH Regulation", Regulation (EC) No. 1907/2006 [2]. According to the Globally Harmonized System (GHS) of classification and labelling of chemicals, which in the European Union has been enacted by Regulation (EC) No. 1272/2008 (classification, labelling and packaging of substances and mixtures) [1], the timetable for the introduction of GHS is followed. The words "preparation" and "mixture" are considered synonymous; both are a mixture or solution of substances that do not react with each other. The old term "preparation" will be replaced by the new term "mixture" in due course. In this document, only the term "mixture" is used.

This European Standard specifies the categories of flammable materials which are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition.
The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition.
This European Standard includes general requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard:
-   toys to be worn on the head: beards, moustaches, wigs, etc. made from hair, pile or material with similar features; masks; hoods, head-dresses, etc.; flowing elements of toys to be worn on the head, but excluding paper novelty hats of the type usually supplied in party crackers;
-   toy disguise costumes and toys intended to be worn by a child in play;
-   toys intended to be entered by a child;
-   soft-filled toys.
NOTE   Additional requirements for flammability of electric toys are specified in EN IEC 62115.

This document specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, Chromium (III), Chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1   See the European Commission guidance document no. 12 on the application of the Directive on the safety of toys - packaging [2].
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
-   Category I: Dry, brittle, powder like or pliable materials;
-   Category II: Liquid or sticky materials;
-   Category III: Scraped-off materials.
The requirements of this document do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2   For the purposes of this document, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
-   All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
-   All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

This European Standard specifies the categories of flammable materials which are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition.
The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition.
This European Standard includes general requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard:
-   toys to be worn on the head: beards, moustaches, wigs, etc. made from hair, pile or material with similar features; masks; hoods, head-dresses, etc.; flowing elements of toys to be worn on the head, but excluding paper novelty hats of the type usually supplied in party crackers;
-   toy disguise costumes and toys intended to be worn by a child in play;
-   toys intended to be entered by a child;
-   soft-filled toys.
NOTE   Additional requirements for flammability of electric toys are specified in EN IEC 62115.

This document applies to olfactory board games, cosmetic kits, gustative games and supplementary sets. It specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits.
These substances and mixtures are:
-   those classified as hazardous by the EC-legislation applying to hazardous substances [13] and hazardous mixtures [13];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the set.
Furthermore, this document specifies allergenic fragrances which are prohibited in toys, marking requirements, in particular regarding allergenic fragrances, and requirements on a contents list, instructions for use, the equipment intended to be used during the activity and the use of highly flammable liquids.
This document does not apply to cosmetic toys such as play cosmetics for dolls.
NOTE   The terms "substance" and "mixture" are defined in the REACH regulation (EC) No. 1907/2006 [14] and in the CLP regulation (EC) No. 1272/2008 [13].

This document specifies requirements for the maximum amount, and in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities.
These substances and mixtures are:
-   those classified as hazardous by the EC-legislation applying to hazardous substances and hazardous mixtures [1];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the experimental set.
This document applies to experimental sets for chemistry and related activities including crystal growing sets, carbon dioxide generating experimental sets and supplementary sets. It also covers sets for chemical experiments within the fields of mineralogy, biology, physics, microscopy and environmental science whenever they contain one or more chemical substances and/or mixtures which are classified as hazardous according to Regulation (EC) No. 1272/2008 [1].
This document also specifies requirements for marking, a contents list, instructions for use, eye protection and for the equipment intended for carrying out the experiments.
This document does not apply to combined sets, e.g. a combination of a chemistry set and a crystal growing set. It also does not apply to toys that are covered by EN 71-13 (e.g. cosmetic kits). Requirements for certain other chemical toys are given in EN 71-5.
NOTE   The terms "substance" and "preparation", are used in the "REACH Regulation", Regulation (EC) No. 1907/2006 [2]. According to the Globally Harmonized System (GHS) of classification and labelling of chemicals, which in the European Union has been enacted by Regulation (EC) No. 1272/2008 (classification, labelling and packaging of substances and mixtures) [1], the timetable for the introduction of GHS is followed. The words "preparation" and "mixture" are considered synonymous; both are a mixture or solution of substances that do not react with each other. The old term "preparation" will be replaced by the new term "mixture" in due course. In this document, only the term "mixture" is used.

This document specifies requirements (content limit) and a test method for certain flame retardants in toy materials.

This document specifies requirements (content limit) and a test method for isothiazolinones in aqueous toy materials.

This document specifies requirements for formamide in foam toy materials and a test method for determining the content of formamide in foam toy materials. This document is applicable to toys intended for use by children under 36 month or other toys intended to be placed in the mouth.
NOTE 1 The document provides a test method to determine if the total content of formamide in foam toy materials is below the 200 mg/kg cut-off limit. Foam toy materials exceeding this limit are subject to the emission limit specified in Appendix C to Annex II to Directive 2009/48/EC.
NOTE 2 The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [3] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.

This document specifies requirements and a test method for migration of bisphenol A from toy materials. This document is applicable to toys intended for use by children under 36 months or other toys intended to be placed in the mouth.
NOTE   The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [3] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.

This document specifies requirements and test methods for determining the concentration of phenol in aqueous toy materials and for migration of phenol from polymeric toy materials. This document is applicable to toys intended for use by children under 36 months or other toys intended to be placed in the mouth.
NOTE   The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [4] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.

This document specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, Chromium (III), Chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1   See the European Commission guidance document no. 12 on the application of the Directive on the safety of toys - packaging [2].
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
-   Category I: Dry, brittle, powder like or pliable materials;
-   Category II: Liquid or sticky materials;
-   Category III: Scraped-off materials.
The requirements of this document do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2   For the purposes of this document, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
-   All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
-   All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

This document applies to olfactory board games, cosmetic kits, gustative games and supplementary sets. It specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits.
These substances and mixtures are:
-   those classified as hazardous by the EC-legislation applying to hazardous substances [13] and hazardous mixtures [13];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the set.
Furthermore, this document specifies allergenic fragrances which are prohibited in toys, marking requirements, in particular regarding allergenic fragrances, and requirements on a contents list, instructions for use, the equipment intended to be used during the activity and the use of highly flammable liquids.
This document does not apply to cosmetic toys such as play cosmetics for dolls.
NOTE   The terms "substance" and "mixture" are defined in the REACH regulation (EC) No. 1907/2006 [14] and in the CLP regulation (EC) No. 1272/2008 [13].

The purpose of this technical report is to assist users of EN 71-1 with the categorisation of projectile
toys under clause 4.17 of that standard. This report looks at various types of toys, commonly available
in the market and indicates under which part of 4.17 they should be assessed.
Various types of projectile launching products will not be considered toys (for example, a catapult used
for angling), further guidance on the categorisation of toy products can be found in EU commission
Explanatory guidance document.

IEC 62115:2017 specifies safety requirements for electric toys that have at least one function dependant on electricity, electric toys being any product designed or intended, whether or not exclusively, for use in play by children under 14 years of age. Examples of electric toys also within the scope of this standard are: - constructional sets; - experimental sets; - functional electric toys (an electric toy that performs and is used in the same way as a product, appliance or installation intended for use by adults, and which may be a scale model of such product, appliance or installation); - electric toy computers as well as a doll's house having an interior lamp. If the packaging is intended to have play value then it is considered to be part of the electric toy. This International Standard only covers the safety aspects of electric toys that relate to an electrical function. This standard covers the safety of electric toys taking power from any source, such as batteries, transformers, solar cells and inductive connections. This second edition cancels and replaces the first edition published in 2003, Amendment 1 (2004) and Amendment 2 (2010). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - the general conditions for tests has been rewritten and modified (Clause 5); - the criteria for reduced testing has been modified (Clause 6); - warnings for toys using button batteries or coin batteries have been added (7.3.3.2, 7.3.3.3); - warnings on ride-on toys have been added (7.5); - the requirements concerning accessibility of batteries have been updated (13.4.1 and 13.4.2); - added requirements to cover toys placed above a child (13.4.4); - added requirements to cover toys connected to other equipment (13.9); - modified the requirements for safety of toys incorporating optical radiation sources (Annex E), to include requirements for using the technical LED data sheet for checking compliance with the specified accessible emission limits (AEL); - updated the details for measurements of the optical radiation from the toy (Annex E); - introduced an informative Annex I concerning measurement methods for toys with an integrated field source generating EMF; - included a normative Annex J concerning safety of remote-controls for electric ride-on toys. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication. Key words: Safety, Electric Toys

2021: CLC legacy converted by DCLab NISOSTS

The purpose of this technical report is to assist users of EN 71-1 with the categorisation of projectile
toys under clause 4.17 of that standard. This report looks at various types of toys, commonly available
in the market and indicates under which part of 4.17 they should be assessed.
Various types of projectile launching products will not be considered toys (for example, a catapult used
for angling), further guidance on the categorisation of toy products can be found in EU commission
Explanatory guidance document.

IEC 62115:2017 specifies safety requirements for electric toys that have at least one function dependant on electricity, electric toys being any product designed or intended, whether or not exclusively, for use in play by children under 14 years of age.
Examples of electric toys also within the scope of this standard are:
- constructional sets;
- experimental sets;
- functional electric toys (an electric toy that performs and is used in the same way as a product, appliance or installation intended for use by adults, and which may be a scale model of such product, appliance or installation);
- electric toy computers as well as a doll's house having an interior lamp.
If the packaging is intended to have play value then it is considered to be part of the electric toy.
This International Standard only covers the safety aspects of electric toys that relate to an electrical function.
This standard covers the safety of electric toys taking power from any source, such as batteries, transformers, solar cells and inductive connections.
This second edition cancels and replaces the first edition published in 2003, Amendment 1 (2004) and Amendment 2 (2010). This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- the general conditions for tests has been rewritten and modified (Clause 5);
- the criteria for reduced testing has been modified (Clause 6);
- warnings for toys using button batteries or coin batteries have been added (7.3.3.2, 7.3.3.3);
- warnings on ride-on toys have been added (7.5);
- the requirements concerning accessibility of batteries have been updated (13.4.1 and 13.4.2);
- added requirements to cover toys placed above a child (13.4.4);
- added requirements to cover toys connected to other equipment (13.9);
- modified the requirements for safety of toys incorporating optical radiation sources (Annex E), to include requirements for using the technical LED data sheet for checking compliance with the specified accessible emission limits (AEL);
- updated the details for measurements of the optical radiation from the toy (Annex E);
- introduced an informative Annex I concerning measurement methods for toys with an integrated field source generating EMF;
- included a normative Annex J concerning safety of remote-controls for electric ride-on toys.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication.
Key words: Safety, Electric Toys

2021: CLC legacy converted by DCLab NISOSTS

This European Standard specifies requirements and methods of tests for mechanical and physical
properties of toys.
This European Standard applies to toys for children, toys being any product or material designed or
intended, whether or not exclusively, for use in play by children of less than 14 years. It refers to new
toys taking into account the period of foreseeable and normal use, and that the toys are used as
intended or in a foreseeable way, bearing in mind the behaviour of children.
It includes specific requirements for toys intended for children under 36 months, children under 18
months and for children who are too young to sit up unaided. According to Directive 2009/48/EC
“intended for use by” means that a parent or supervisor shall reasonably be able to assume by virtue of
the functions, dimensions and characteristics of a toy that it is intended for use by children of the stated
age group. Therefore, for the purpose of this European Standard, e.g. soft-filled toys with simple features
intended for holding and cuddling are considered as toys intended for children under 36 months.
NOTE Information relating to the age grading of toys and, in particular, which toys are intended for children
under 36 months and which toys are not, can be found in !Deleted text" CEN/CENELEC Guide 11 and the
European Commission’s Guidance Documents.
This European Standard also specifies requirements for packaging, marking and labelling.
This European Standard does not cover musical instruments, sports equipment or similar items but
does include their toy counterparts.
This European Standard does not apply to the following toys:
— playground equipment intended for public use;
— automatic playing machines, whether coin operated or not, intended for public use;
— toy vehicles equipped with combustion engines (see A.2);
— toy steam engines
— toy slings and toy catapults, supplied without projectiles;
— flying toys incorporating rotor blade(s) which are capable of spinning approximately horizontally,
each blade being greater than 175 mm in length, measured from the centre of rotation to the blade
tip, and with an overall mass of the flying toy greater than 50 g.
Toy slings and toy catapults supplied with projectiles are covered by this standard.

This European Standard specifies requirements and methods of tests for mechanical and physical
properties of toys.
This European Standard applies to toys for children, toys being any product or material designed or
intended, whether or not exclusively, for use in play by children of less than 14 years. It refers to new
toys taking into account the period of foreseeable and normal use, and that the toys are used as
intended or in a foreseeable way, bearing in mind the behaviour of children.
It includes specific requirements for toys intended for children under 36 months, children under 18
months and for children who are too young to sit up unaided. According to Directive 2009/48/EC
“intended for use by” means that a parent or supervisor shall reasonably be able to assume by virtue of
the functions, dimensions and characteristics of a toy that it is intended for use by children of the stated
age group. Therefore, for the purpose of this European Standard, e.g. soft-filled toys with simple features
intended for holding and cuddling are considered as toys intended for children under 36 months.
NOTE Information relating to the age grading of toys and, in particular, which toys are intended for children
under 36 months and which toys are not, can be found in !Deleted text" CEN/CENELEC Guide 11 and the
European Commission’s Guidance Documents.
This European Standard also specifies requirements for packaging, marking and labelling.
This European Standard does not cover musical instruments, sports equipment or similar items but
does include their toy counterparts.
This European Standard does not apply to the following toys:
— playground equipment intended for public use;
— automatic playing machines, whether coin operated or not, intended for public use;
— toy vehicles equipped with combustion engines (see A.2);
— toy steam engines
— toy slings and toy catapults, supplied without projectiles;
— flying toys incorporating rotor blade(s) which are capable of spinning approximately horizontally,
each blade being greater than 175 mm in length, measured from the centre of rotation to the blade
tip, and with an overall mass of the flying toy greater than 50 g.
Toy slings and toy catapults supplied with projectiles are covered by this standard.

This document provides guidance on auditing management systems, including the principles of auditing, managing an audit programme and conducting management system audits, as well as guidance on the evaluation of competence of individuals involved in the audit process. These activities include the individual(s) managing the audit programme, auditors and audit teams.
It is applicable to all organizations that need to plan and conduct internal or external audits of management systems or manage an audit programme.
The application of this document to other types of audits is possible, provided that special consideration is given to the specific competence needed.

This European Standard specifies requirements and test methods for activity toys for domestic use often attached to or incorporating a crossbeam, and similar toys intended for children under 14 years to play on or in and often intended to bear the mass of one or more children.
This European Standard also specifies requirements for:
-   separately sold accessories for, and components of activity toys;
-   separately sold swing elements that are ready for use on or in combination with an activity toy;
-   construction packages for activity toys including components used to build activity toys according to a scheduled building instruction.
The scope of this European Standard excludes:
-   playground equipment intended for public use dealt with in the EN 1176 series;
-   bow-mounted rocking activity toys such as rocking horses and similar toys, which are covered by specific requirements in EN 71 1;
-   toy pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool;
NOTE 1   For information regarding the classification of pools as toys see European Commission guidance document No. 8 from Bibliographical Entry [1].
-   pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool, without play elements covered e.g. by the EN 16582 series or EN 16927.
NOTE 2   There is an enhanced risk of drowning in toy pools where the depth of water is in excess of 400 mm.
-   trampolines for domestic use dealt with in EN 71 14.
-   inflatable activity toys (except paddling pools).
See also A.1.

This European Standard specifies requirements and test methods for activity toys for domestic use often attached to or incorporating a crossbeam, and similar toys intended for children under 14 years to play on or in and often intended to bear the mass of one or more children.
This European Standard also specifies requirements for:
-   separately sold accessories for, and components of activity toys;
-   separately sold swing elements that are ready for use on or in combination with an activity toy;
-   construction packages for activity toys including components used to build activity toys according to a scheduled building instruction.
The scope of this European Standard excludes:
-   playground equipment intended for public use dealt with in the EN 1176 series;
-   bow-mounted rocking activity toys such as rocking horses and similar toys, which are covered by specific requirements in EN 71 1;
-   toy pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool;
NOTE 1   For information regarding the classification of pools as toys see European Commission guidance document No. 8 from Bibliographical Entry [1].
-   pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool, without play elements covered e.g. by the EN 16582 series or EN 16927.
NOTE 2   There is an enhanced risk of drowning in toy pools where the depth of water is in excess of 400 mm.
-   trampolines for domestic use dealt with in EN 71 14.
-   inflatable activity toys (except paddling pools).
See also A.1.

This European Standard specifies the requirements and test methods for N nitrosamines and N nitrosatable substances for:
   toys and parts of toys made from elastomers and intended for use by children under 36 months;
   toys and parts of toys made from elastomers and intended to be placed in the mouth;
   finger paints for children under 36 months.
EXAMPLES   Examples of toys made from elastomers are balloons and teethers.

This European Standard specifies the requirements and test methods for N nitrosamines and N nitrosatable substances for:
   toys and parts of toys made from elastomers and intended for use by children under 36 months;
   toys and parts of toys made from elastomers and intended to be placed in the mouth;
   finger paints for children under 36 months.
EXAMPLES   Examples of toys made from elastomers are balloons and teethers.

This European Standard specifies requirements and test methods for the substances and materials used in chemical toys (sets) other than experimental sets. These substances and mixtures are:
   those classified as dangerous by the EC-legislation applying to dangerous substances and dangerous mixtures [5];
   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the above mentioned legislation; and
   any other chemical substance(s) and mixture(s) delivered with the chemical toy.
NOTE   The terms “substance” and “mixture” are defined in the REACH regulation No. (EC)1907/2006 and in the CLP regulation (EC) No. 1272/2008.
Additionally, requirements are specified for markings, warnings, safety rules, contents list, instructions for use and first aid information.
This Part of EN 71 applies to:
   plaster of Paris (gypsum) moulding sets;
   ceramic and vitreous enamelling materials supplied in miniature workshop sets;
   oven-hardening plasticised PVC modelling clay sets;
   plastic moulding sets;
   embedding sets;
   adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents), supplied or recommended in model sets.

This document specifies requirements and test methods for activity toys.
This document also specifies requirements for:
-   separately sold accessories for, and components of activity toys;
-   separately sold swing elements that are ready for use on or in combination with an activity toy;
-   construction packages for activity toys including components used to build activity toys in accordance with a scheduled building instruction.
The scope of this document excludes:
-   playground equipment intended for public use dealt with in the EN 1176 series;
-   bow-mounted rocking activity toys such as rocking horses and similar toys, which are covered by specific requirements in EN 71-1;
-   toy pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool;
NOTE 1   For information regarding the classification of pools as toys see European Commission guidance document No. 8 on the application of the Directive 2009/48/EC on the safety of toys - Pools [1].
-   pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool, without play elements covered e.g. by the EN 16582 series or EN 16927.
NOTE 2   There is an enhanced risk of drowning in pools where the depth of water is in excess of 400 mm.
-   toy slides designed to be used in conjunction with domestic in-ground swimming pools;
-   trampolines for domestic use dealt with in EN 71-14;
-   powered blowers used to continuously inflate inflatable activity toys.
NOTE 3   Powered blowers used to continuously inflate inflatable activity toys are considered to be a household appliance and covered by requirements given in EN 60335-2-80.
See also Clause A.1.

This document specifies requirements and methods of tests for mechanical and physical properties of toys.
This document applies to toys for children, toys being any product or material designed or intended, whether or not exclusively, for use in play by children of less than 14 years. It refers to new toys taking into account the period of foreseeable and normal use, and that the toys are used as intended or in a foreseeable way, bearing in mind the behaviour of children.
It includes specific requirements for toys intended for children under 36 months, children under 18 months and for children who are too young to sit up unaided. For example, soft-filled toys with simple features intended for holding and cuddling are considered as intended for use by children under 36 months.
NOTE   Information relating to the age grading and age determination of toys can be found in CEN ISO/TR 8124-8 [22] and the European Commission’s Guidance Documents on the Toy Safety Directive.
This document also specifies requirements for packaging, marking and labelling.
This document does not apply to the following toys:
-   automatic playing machines, whether coin operated or not, intended for public use;
-   toy vehicles equipped with combustion engines);
-   toy steam engines;
-   toy slings and toy catapults, supplied without projectiles;
-   remote control flying toys incorporating rotor blade(s) which are capable of spinning approximately horizontally, each blade being greater than 175 mm in length, measured from the centre of rotation to the blade tip, and with an overall mass of the flying toy greater than 50 g.
This document does not cover musical instruments, sports equipment or similar items but does include their toy counterparts.
Toy slings and toy catapults supplied with projectiles are covered by this document.
This document does not cover electrical safety aspects of toys which are covered by EN IEC 62115.
Furthermore, it does not cover the following items which, for the purpose of this document, are not considered as toys:
a)   decorative objects for festivities and celebrations;
b)   products for collectors, provided that the product or its packaging bears a visible and legible indication that it is intended for collectors of 14 years of age and above; examples of this category are:
1)   detailed and faithful scale models (see A.2);
2)   kits for the assembly of detailed scale models;
3)   folk dolls and decorative dolls and other similar articles;
4)   historical replicas of toys;
5)   reproductions of real fire arms;
c)   sports equipment including roller skates, inline skates, and skateboards intended for children with a body mass of more than 20 kg;
d)   bicycles with a maximum saddle height of more than 435 mm, measured as the vertical distance from the ground to the top of the seat surface, with the seat in a horizontal position and with the seat pillar set to the minimum insertion mark;
e)   scooters and other means of transport designed for sport or which are intended to be used for travel on public roads or public pathways;
f)   electrically-driven vehicles which are intended to be used for travel on public roads, public pathways, or the pavement thereof;
g)   aquatic equipment intended to be used in deep water, and swimming learning devices for children, such as swim seats and swimming aids;
h)   puzzles with more than 500 pieces;
i)   guns and pistols using compressed gas, with the exception of water guns and water pistols;
j)   bows for archery over 120 cm long;
k)   fireworks, including percussion caps which are not specifically designed for toys;
l)   products and games using sharp-pointed missiles, such as sets of darts with metallic points;
...

The content of the corrigendum 1 (2025-10) has been included in this copy.

This document specifies microbiological cleanliness and preservative efficacy requirements for accessible aqueous media in toys.
The requirements in this document apply to all toys that are, contain or are supplied with accessible aqueous materials (e.g. paste, putty, finger paint, liquid or gel).
The cleanliness and preservation effectiveness requirements are applicable to a toy as it is initially received by the consumer, in an unopened and undamaged container. This document does not apply to a toy that has been used, has had its packaging opened or is otherwise compromised in a way that would introduce microbiological contamination.
This document does not apply to toys and samples which are post-consumer use, since the microbiological limits are inappropriate given, there is no way to establish what conditions the toys have been subject to before testing.
This document does not apply to:
-   materials that are inaccessible during normal use or after reasonably foreseeable abuse;
-   food;
-   cosmetics;
-   components of toys covered by EN 71-13 where;
-   the component is in scope of the Cosmetic Products Regulation (i.e. Regulation (EC) No 1223/2009 [13];
-   the component comprises only recognized food flavours and food ingredients (see relevant legislation, for example Regulation (EC) No 178/2002 [16] ("general food law"), Regulation (EC) No 1334/2008 [15] (flavours), Regulation (EC) No 1333/2008 [14], Commission Regulation (EU) No 231/2012 [18] (food additives) and Regulation (EU) No 1169/2011 (food information to consumers)[17]);
-   experimental sets covered by EN 71-4.
NOTE   Play cosmetics, that are only for use on the toy (e.g. makeup products only for a doll), are not excluded.

This proposed TR gives guidance on the requirement for toys which may be a realistic food imitation under the meaning of the prEN 71-1 clause 4.28, in order to assist users of the EN 71-1 standard.
This document is only to assist users in distinguishing whether a toy product that imitates food in some way should be considered a realistic food imitation. It does not address products that are not toys.

This document applies to olfactory board games, cosmetic kits, gustative games and supplementary sets. It specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits.
These substances and mixtures are:
-   those classified as hazardous by the EC-legislation applying to hazardous substances [13] and hazardous mixtures [13];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the set.
Furthermore, this document specifies allergenic fragrances which are prohibited in toys, marking requirements, in particular regarding allergenic fragrances, and requirements on a contents list, instructions for use, the equipment intended to be used during the activity and the use of highly flammable liquids.
This document does not apply to cosmetic toys such as play cosmetics for dolls.
NOTE   The terms "substance" and "mixture" are defined in the REACH regulation (EC) No. 1907/2006 [14] and in the CLP regulation (EC) No. 1272/2008 [13].

This European Standard specifies the categories of flammable materials which are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition.
The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition.
This European Standard includes general requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard:
-   toys to be worn on the head: beards, moustaches, wigs, etc. made from hair, pile or material with similar features; masks; hoods, head-dresses, etc.; flowing elements of toys to be worn on the head, but excluding paper novelty hats of the type usually supplied in party crackers;
-   toy disguise costumes and toys intended to be worn by a child in play;
-   toys intended to be entered by a child;
-   soft-filled toys.
NOTE   Additional requirements for flammability of electric toys are specified in EN IEC 62115.

This document specifies requirements for the maximum amount, and in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities.
These substances and mixtures are:
-   those classified as hazardous by the EC-legislation applying to hazardous substances and hazardous mixtures [1];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the experimental set.
This document applies to experimental sets for chemistry and related activities including crystal growing sets, carbon dioxide generating experimental sets and supplementary sets. It also covers sets for chemical experiments within the fields of mineralogy, biology, physics, microscopy and environmental science whenever they contain one or more chemical substances and/or mixtures which are classified as hazardous according to Regulation (EC) No. 1272/2008 [1].
This document also specifies requirements for marking, a contents list, instructions for use, eye protection and for the equipment intended for carrying out the experiments.
This document does not apply to combined sets, e.g. a combination of a chemistry set and a crystal growing set. It also does not apply to toys that are covered by EN 71-13 (e.g. cosmetic kits). Requirements for certain other chemical toys are given in EN 71-5.
NOTE   The terms "substance" and "preparation", are used in the "REACH Regulation", Regulation (EC) No. 1907/2006 [2]. According to the Globally Harmonized System (GHS) of classification and labelling of chemicals, which in the European Union has been enacted by Regulation (EC) No. 1272/2008 (classification, labelling and packaging of substances and mixtures) [1], the timetable for the introduction of GHS is followed. The words "preparation" and "mixture" are considered synonymous; both are a mixture or solution of substances that do not react with each other. The old term "preparation" will be replaced by the new term "mixture" in due course. In this document, only the term "mixture" is used.

This document specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, Chromium (III), Chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1   See the European Commission guidance document no. 12 on the application of the Directive on the safety of toys - packaging [2].
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
-   Category I: Dry, brittle, powder like or pliable materials;
-   Category II: Liquid or sticky materials;
-   Category III: Scraped-off materials.
The requirements of this document do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2   For the purposes of this document, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
-   All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
-   All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

This document specifies microbiological cleanliness and preservative efficacy requirements for accessible aqueous media in toys.
The requirements in this document apply to all toys that are, contain or are supplied with accessible aqueous materials (e.g. paste, putty, finger paint, liquid or gel).
The cleanliness and preservation effectiveness requirements are applicable to a toy as it is initially received by the consumer, in an unopened and undamaged container. This document does not apply to a toy that has been used, has had its packaging opened or is otherwise compromised in a way that would introduce microbiological contamination.
This document does not apply to toys and samples which are post-consumer use, since the microbiological limits are inappropriate given, there is no way to establish what conditions the toys have been subject to before testing.
This document does not apply to:
-   materials that are inaccessible during normal use or after reasonably foreseeable abuse;
-   food;
-   cosmetics;
-   components of toys covered by EN 71-13 where;
-   the component is in scope of the Cosmetic Products Regulation (i.e. Regulation (EC) No 1223/2009 [13];
-   the component comprises only recognized food flavours and food ingredients (see relevant legislation, for example Regulation (EC) No 178/2002 [16] ("general food law"), Regulation (EC) No 1334/2008 [15] (flavours), Regulation (EC) No 1333/2008 [14], Commission Regulation (EU) No 231/2012 [18] (food additives) and Regulation (EU) No 1169/2011 (food information to consumers)[17]);
-   experimental sets covered by EN 71-4.
NOTE   Play cosmetics, that are only for use on the toy (e.g. makeup products only for a doll), are not excluded.

This document specifies requirements and test methods for toy materials (substances and mixtures) used in chemical toys (sets) other than experimental sets. These substances and mixtures are:
-   those classified as dangerous by the EU legislation applying to dangerous substances and dangerous mixtures [5];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the chemical toy.
NOTE   The terms "substance" and "mixture" are defined in the REACH regulation No. (EC)1907/2006 and in the CLP regulation (EC) No. 1272/2008.
Additionally, requirements are specified for markings, warnings, safety rules, contents list, instructions for use and first aid information.
This document applies to:
-   plaster of Paris (gypsum) moulding sets;
-   oven-hardening plasticised PVC modelling clay sets;
-   polystyrene granules sets;
-   embedding sets;
-   adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents), supplied or recommended in model sets;
-   slime kits.

This document specifies requirements and methods of tests for mechanical and physical properties of toys.
This document applies to toys for children, toys being any product or material designed or intended, whether or not exclusively, for use in play by children of less than 14 years. It refers to new toys taking into account the period of foreseeable and normal use, and that the toys are used as intended or in a foreseeable way, bearing in mind the behaviour of children.
It includes specific requirements for toys intended for children under 36 months, children under 18 months and for children who are too young to sit up unaided. For example, soft-filled toys with simple features intended for holding and cuddling are considered as intended for use by children under 36 months.
NOTE   Information relating to the age grading and age determination of toys can be found in CEN ISO/TR 8124-8 [22] and the European Commission’s Guidance Documents on the Toy Safety Directive.
This document also specifies requirements for packaging, marking and labelling.
This document does not apply to the following toys:
-   automatic playing machines, whether coin operated or not, intended for public use;
-   toy vehicles equipped with combustion engines);
-   toy steam engines;
-   toy slings and toy catapults, supplied without projectiles;
-   remote control flying toys incorporating rotor blade(s) which are capable of spinning approximately horizontally, each blade being greater than 175 mm in length, measured from the centre of rotation to the blade tip, and with an overall mass of the flying toy greater than 50 g.
This document does not cover musical instruments, sports equipment or similar items but does include their toy counterparts.
Toy slings and toy catapults supplied with projectiles are covered by this document.
This document does not cover electrical safety aspects of toys which are covered by EN IEC 62115.
Furthermore, it does not cover the following items which, for the purpose of this document, are not considered as toys:
a)   decorative objects for festivities and celebrations;
b)   products for collectors, provided that the product or its packaging bears a visible and legible indication that it is intended for collectors of 14 years of age and above; examples of this category are:
1)   detailed and faithful scale models (see A.2);
2)   kits for the assembly of detailed scale models;
3)   folk dolls and decorative dolls and other similar articles;
4)   historical replicas of toys;
5)   reproductions of real fire arms;
c)   sports equipment including roller skates, inline skates, and skateboards intended for children with a body mass of more than 20 kg;
d)   bicycles with a maximum saddle height of more than 435 mm, measured as the vertical distance from the ground to the top of the seat surface, with the seat in a horizontal position and with the seat pillar set to the minimum insertion mark;
e)   scooters and other means of transport designed for sport or which are intended to be used for travel on public roads or public pathways;
f)   electrically-driven vehicles which are intended to be used for travel on public roads, public pathways, or the pavement thereof;
g)   aquatic equipment intended to be used in deep water, and swimming learning devices for children, such as swim seats and swimming aids;
h)   puzzles with more than 500 pieces;
i)   guns and pistols using compressed gas, with the exception of water guns and water pistols;
j)   bows for archery over 120 cm long;
k)   fireworks, including percussion caps which are not specifically designed for toys;
l)   products and games using sharp-pointed missiles, such as sets of darts with metallic points;
...