19.020 - Test conditions and procedures in general

IEC 61010-2-202:2020 is available as IEC 61010-2-202:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-202:2020 constitutes Part 2-202 of a planned series of standards on industrial-process measurement, control and automation equipment. Safety terms of general use are defined in IEC 61010-1. More specific terms are defined in each part. This part incorporates the safety related req...view more

NEW!IEC 61010-2-201:2017 is available as IEC 61010-2-201:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-201:2017 specifies safety requirements and related verification tests for any product performing the function of control equipment and/or their associated peripherals. In addition, these products have as their intended use the command and control of machines, automated manufac...view more

ISO/IEC 17025:2017 specifies the general requirements for the competence, impartiality and consistent operation of laboratories.
ISO/IEC 17025:2017 is applicable to all organizations performing laboratory activities, regardless of the number of personnel.
Laboratory customers, regulatory authorities, organizations and schemes using peer-assessment, accreditation bodies, and others use ISO/IEC 17025:2017 in confirming or recognizing the competence of laboratories.

ISO/IEC 17025:2017 specifies the general requirements for the competence, impartiality and consistent operation of laboratories.
ISO/IEC 17025:2017 is applicable to all organizations performing laboratory activities, regardless of the number of personnel.
Laboratory customers, regulatory authorities, organizations and schemes using peer-assessment, accreditation bodies, and others use ISO/IEC 17025:2017 in confirming or recognizing the competence of laboratories.

IEC 61010-2-202:2016 specifies the safety requirements for electric ACTUATORs and SOLENOIDs, as applied to valves, intended to be installed in an industrial process or discrete control environment. This publication is to be read in conjunction with IEC 61010-1:2010.

IEC 61010-2-201:2017 is also available as IEC 61010-2-201:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61010-2-201:2017 specifies safety requirements and related verification tests for any product performing the function of control equipment and/or their associated peripherals. In addition, these products have as their intended use the command and control of machines, automated ma...view more

ISO/IEC Guide 46:2017 establishes general principles for the conduct of comparative testing of products and services for the information of consumers. It does not cover anti-counterfeiting or conformity assessment.

IEC TR 60216-7-2:2016(E), which is a Technical Report, is to validate the procedures of IEC TS 60216-7-1 in providing a similar temperature index to conventional methods used in other parts of the IEC 60216 series. These round robin test results do not provide statistical analysis for precisions. The round robin test focuses on preliminary studies to understand the evaluation and calculation procedures, influence on apparatus, and data variance among laboratories before determination of precisio...view more

IEC 61010-2-202:2016 specifies the safety requirements for electric ACTUATORs and SOLENOIDs, as applied to valves, intended to be installed in an industrial process or discrete control environment.
This publication is to be read in conjunction with IEC 61010-1:2010.

Specifies three atmospheres approximated to the natural environmental conditions. However, it is desirable to use only one of these.

IEC 62841-2-14:2015 applies to hand-held planners the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mount...view more

ISO/IEC 14543-5-7:2015(E) specifies the architecture and framework for the remote access of IGRS devices and services in the home electronic system. The remote access communications protocol and application profiles are specified in other parts of this series. The relationship among these parts is specified in this standard. It is applicable to the remote access of an IGRS sub-network (called an IGRS subnet) for resource sharing and service collaboration among home and/or remote computers, consu...view more

IEC TS 60216-7-1:2015(E) describes the procedure for the evaluation of the thermal endurance of electrical insulating materials, based on thermal analysis methods for the evaluation of the activation energy of the thermal degradation reaction and a conventional life test providing a life point in the thermal endurance graph. The purpose of the test procedure is to estimate the relative temperature index (RTE).

This International Standard provides guidance on the application of various accelerated test techniques for measurement or improvement of product reliability. Identification of potential failure modes that could be experienced in the use of a product/item and their mitigation is instrumental to ensure dependability of an item. The object of the methods is to either identify potential design weakness or provide information on item dependability, or to achieve necessary reliability/availability im...view more

This Technical Report provides guidance for carrying out round robin tests (RRT) and hence for the determination of levels of repeatability (intra-laboratory variability) and reproducibility (inter-laboratory variability). This Technical Report can also be used to verify the measurement methods, to improve the measurement method, and to qualify laboratories. It is not applicable for the determination of production variation for a particular product. General advice on proficiency testing of labor...view more

This document provides guidance for carrying out round robin tests (RRT) and hence for the determination of levels of repeatability (intra-laboratory variability) and reproducibility (inter-lababoratory variability).

IEC/TR 61156-1-5:2013(E), which is a Technical Report, describes correction procedures for the measurement results of return loss and input impedance.

IEC 61010-2-201:2013 specifies the complete safety requirements for control equipment (e.g. programmable controller (PLC)), the components of Distributed Control Systems, I/O devices, Human Machine Interface (HMI)). Safety terms of general use are defined in IEC 61010-1. More specific terms are defined in each part. This part incorporates the safety related requirements of Programmable Controllers. Annex DD provides a cross reference between clauses of this standard and those of IEC 61010-1 or I...view more

This International Standard gives a number of optimized test plans, the corresponding operating characteristic curves and expected test times. In addition the algorithms for designing test plans using a spreadsheet program are also given, together with guidance on how to choose test plans. This standard specifies procedures to test whether an observed value of - failure rate, - failure intensity, - mean time to failure (MTTF), - mean operating time between failures (MTBF), conforms to a given re...view more

IEC 61124:2012 gives a number of optimized test plans, the corresponding operating characteristic curves and expected test times. In addition the algorithms for designing test plans using a spreadsheet program are also given, together with guidance on how to choose test plans. This standard specifies procedures to test whether an observed value of: failure rate, failure intensity, meantime to failure (MTTF), and mean operating time between failures (MTBF). The main changes with respect to the pr...view more