This document specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks (HSK) in accordance with ISO 12164-5 to be applied to machine tools (e.g. machines for turning, drilling, milling and grinding). This document specifies three types of receivers: — type AS for automatic tool change; — type CS for manual tool change only, via radial holes in both the receiver and the tool shank; — type ES for automatic tool change. NOTE 1 The receivers of types AS, CS and ES fit the HSK shanks of types AS, CS and ES (according to ISO 12164-5). NOTE 2 HSK shanks of types AS and ES can also be changed manually.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

This document specifies the dimensions of hollow taper shanks with flange contact surface (HSK). These shanks are the male part of the interface to the machine tools (e.g. milling/drilling and grinding machines). This document specifies three types of shanks: — types AS and ES have a peripherally grooved flanges for automatic tool change; — type CS has a flange without peripheral groove and can only be changed manually. HSK types AS and ES can also be changed manually via radial bore holes in the hollow shank taper. This document provides information for dynamically balanced HSK‑AS and HSK‑CS shanks balancing according to ISO 16084.

  • Standard
    38 pages
    English language
    sale 15% off
  • Standard
    37 pages
    French language
    sale 15% off

This document specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks (HSK) according to ISO 12164-3 to be applied to machine tools (turning and combinations of turning and milling machines). This document specifies two types of receivers: — type T for automatic tool change; — type U for manual tool change only, via radial holes in both the receiver and the tool shank. NOTE 1 The receivers of types T and U fit the HSK shanks T, TA and U (according to ISO 12164-3). The receivers also fit the HSK shanks A, AB, C and CB according to ISO 12164-1. NOTE 2 HSK types A, AB, C, CB, T and TA can also be changed manually.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

This document specifies the dimensions for hollow taper shanks with flange contact surface (HSK). These shanks are the male part of the interface to the machine tools (e.g. milling/drilling, turning and grinding machines). This document specifies three types of shanks: — type T has a peripherally grooved flange for automatic tool change in turning machines with a gripper for HSK type T; — type TA has a peripherally grooved flange for automatic tool change in milling machines, enabled (designed) for turning, with a gripper for HSK type A or AB; — type U has no peripheral groove flange and is designed for manual tool change in turning machines. HSK types T and TA can also be changed manually via radial access bore holes in the hollow shank taper.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off

This document specifies the dimensions of hollow taper shanks with flange contact surface (HSK). These shanks are the male part of the interface to the machine tools (e. g. milling/drilling, turning and grinding machines). This document specifies five types of shanks: — types A, AB and EB have a peripherally grooved flange for automatic tool change; — types C and CB have a flange without peripheral groove and can only be changed manually. HSK types A and AB can also be changed manually via radial access bore holes in the hollow shank tapers. This document provides information for dynamically balanced HSK‑AB and HSK‑CB shanks balancing according to ISO 16084.

  • Standard
    44 pages
    English language
    sale 15% off
  • Standard
    47 pages
    French language
    sale 15% off

This document specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks (HSK) in accordance with ISO 12164-1 to be applied on machine tools (e.g. for turning, drilling, milling, grinding and combinations of them). This document specifies three types of receivers: — type A for automatic tool change; — type C for manual tool change only, via radial holes in both the receiver and the tool shank; — type E for automatic tool change. NOTE 1 The receivers of types A, C and E fit the HSK shanks of types A, AB, C, CB and EB (according to ISO 12164-1). NOTE 2 HSK shanks of types A, AB and EB can also be changed manually.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

This document specifies the dimensions of medium-transfer units for wet processing and interfaces machine tool with insert nuts, which are used in polygonal taper in accordance with the ISO 26623 series.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

This document specifies the dimensions of medium-transfer units for wet processing and interfaces machine tool with insert nuts, which are used in hollow taper shanks taper in accordance with the ISO 12164 series.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off

This document specifies dimensions for polygonal taper interfaces with flange contact surface — polygon shanks for automatic and manual tool exchange to be applied on machine tools (e. g. turning machines, drilling machines, milling machines and turn/milling centres as well as grinding machines). A range of shank sizes is specified. These shanks incorporate a grooved flange to enable automatic tool exchange. The clamping can be realized by a circular groove using clamping segments or internal screw threads using centre-bolts. The torque is transmitted by form lock (polygon).

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off

ISO 26622-1:2017 specifies the dimensions for modular taper interface with ball track system: tapered shanks for automatic and manual tool exchange to be applied on machine tools (e.g. lathe machines, drilling machines, milling machines and turn/milling machine centres). A range of shank sizes is specified and details of the coolant-sealing O-ring are specified in Annex A. The shank incorporates a flange with a groove to enable automatic tool exchange. The tools can also be exchanged manually. The clamping of the shank can be realized by the use of locking balls of a standard size and by a variety of mechanisms. The torque is transmitted at the tail end of the shank by friction, locking elements and keys.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off

ISO 238:2016 specifies the dimensions of the following two pieces of equipment: a) reduction sleeves for tools with Morse taper shanks; b) extension sockets for tools with Morse taper shanks. It comprises, for each of them, two tables giving the dimensions in millimetres and the corresponding dimensions in inches, respectively.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

ISO 4207:2016 specifies the dimensions of counterbores with Morse taper shanks and detachable pilots for general use.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

ISO 4202:2016 specifies the dimensions of reduction sleeves with external 7/24 taper (Nos. 30, 40, 45, 50 and 60) for tools with Morse taper shanks (Nos. 1 to 6). All these sleeves allow driving of tools having Morse taper shanks which have a tenon at the small end of the shank; some sleeves allow driving of tools having Morse taper shanks which have an axially tapped hole in the shank: - with the use of an incorporated screw for sleeves 30 × 1 ? 40 × 1 ? 40 × 2 ? 45 × 1 ? 45 × 2 ? 45 × 3 ? 50 × 2 ? 50 × 3 ? 50 × 4 ? 60 × 3 ? 60 × 4 ? 60 × 5; - with the use of a draw bar for sleeves 30 × 1 ? 30 × 2 ? 40 × 1 ? 40 × 2 ? 40 × 3 ? 45 × 1 ? 45 × 2 ? 45 × 3 ? 45 × 4 ? 50 × 2 ? 50 × 3 ? 50 × 4 ? 50 × 5 ? 60 × 3 ? 60 × 4 ? 60 × 5 ? 60 × 6. Morse tapers conform to ISO 296 while 7/24 tapers are in accordance with ISO 297.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

ISO 10897:2016 specifies the dimensions, materials and manufacturing requirements, and designation of collets for tools with cylindrical shanks and their corresponding holders and nuts. For non-standardized clamping devices, such as clamping devices specified in drawings, these holders can be agreed upon between customer and supplier. Form A applies where a clamping range of H10 is sufficient. Form B can be used for any application without lateral cutting load. Annex A specifies the values for AT3 tolerance and AT4 tolerance.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off

ISO 10889-4:2016 specifies dimensions, designations and complementary technical delivery conditions for tool holders with a rectangular axial seat of types C1 to C4 with cylindrical shank in accordance with ISO 10889‑1. ISO 10889-4:2016 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. For non-standardized tool holders with rectangular axial seat, such as the tool holders shown in Figures 1 to 4, it is advisable to apply the corresponding specifications of this part of ISO 10889.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off

ISO 10889-5:2016 specifies dimensions, designations and complementary technical delivery conditions for tool holders with more than one rectangular seat of types D1 and D2 with cylindrical shank in accordance with ISO 10889‑1. ISO 10889-5:2016 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. For non-standardized tool holders with more than one rectangular seat, such as tool holders as shown in Figures 1 to 3, it is advisable to apply the corresponding specifications of this part of ISO 10889.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

ISO 10889-7:2016 specifies dimensions, designations, and complementary technical delivery conditions for tool holders with taper seat of type F and with a cylindrical shank mounting system in accordance with ISO 10889‑1. ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. For non-standardized tool holders with taper seat such as the tool holders shown in Figure 1, it is advisable to apply the corresponding specifications of this part of ISO 10889.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

ISO 10889-3:2016 specifies dimensions, designations, and complementary technical delivery conditions for tool holders with a rectangular radial seat of types B1 to B8 with cylindrical shank in accordance with ISO 10889‑1. ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. For non-standardized tool holders with a rectangular radial seat such as the tool holders shown in the figures, it is advisable to apply the corresponding specifications of this part of ISO 10889.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

ISO 10889-6:2016 specifies dimensions, designations, and complementary technical delivery conditions for tool holders with cylindrical seat of types E1 to E4 with a mounting system cylindrical shank in accordance with ISO 10889‑1. ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. For non-standardized tool holders, such as tool holders with a cylindrical seat as shown in Figures 1 to 4, it is advisable to apply the corresponding specifications of this part of ISO 10889.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off

ISO 10889-2:2016 specifies dimensions, designations and complementary technical delivery conditions for tool holders of type A with cylindrical shank in accordance with ISO 10889‑1 for tool holders of special designs. ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

ISO 7388-3:2016 specifies the dimensions of retention knobs of forms AD, AF, UD, UF, JD and JF for tool shanks with a 7/24 taper for automatic tool changers used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270 (all parts).

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

ISO 26623-2:2014 specifies dimensions for polygonal taper interfaces with flange contact surface, polygon-receivers for automatic and manual tool exchange to be applied on machine tools (e.g. turning machines, drilling machines, milling machines, and turn/milling centres as well as grinding machines). A range of receiver sizes is specified. The torque is transmitted by form lock (polygon).

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

ISO 10649-1:2013 specifies the dimensions of tool interface for cutter arbors with parallel key and tenon drive.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

ISO 10649-3:2013 specifies the dimensions of cutter arbors with parallel key and tenon drive with 7/24 tapers for automatic tool changer.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

ISO 10649-4:2013 specifies the dimensions of cutter arbors with parallel key and tenon drive with 7/24 tapers without automatic tool changers.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

ISO 10649-2:2013 specifies the dimensions of cutter arbors with parallel key and tenon drive with hollow taper interface (HSK) with flange contact surface.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

ISO 10649-6:2012 specifies the dimensions of cutter arbors with parallel key and tenon drive with modular taper interface (TS) with ball track system.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

ISO 10649-5:2012 specifies the dimensions of cutter arbors with parallel key and tenon drive with polygonal taper interface (PSC) with flange contact surface.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

ISO 9270-1:2010 specifies the dimensions and tolerances of 7/24 taper spindle noses with tenons for automatic tool changers, intended for use with the corresponding tool shanks of forms A, AD, AF, U, UD and UF according to ISO 7388-1.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

ISO 9270-2:2010 specifies the dimensions and tolerances of 7/24 taper spindle noses with tenons for automatic tool changers, intended for use with the corresponding tool shanks of forms J, JD and JF according to ISO 7388-2.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

ISO 19719:2010 specifies terms and definitions used for clamping technology, including specific technical terms which are commonly used for work holding chucks.

  • Standard
    80 pages
    English language
    sale 15% off

ISO 702-1:2009 specifies the sizes for interchangeability of conical spindle noses and corresponding connecting faces of face plates or work holding chucks.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

ISO 3937-1:2008 specifies the dimensions of cutter arbors with tenon drive and with Morse tapers.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

ISO 3937-2:2008 specifies the dimensions of cutter arbors with tenon drive with 7/24 tapers. It also specifies the dimensions of cutter arbors with tenon drive and enlarged contact surface of the cutters.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

ISO 3937‑3:2008 specifies the dimensions of cutter arbors with tenon drive and with hollow taper interface with flange contact surface (HSK). It also specifies the dimensions of cutter arbors with tenon drive and enlarged contact surface of the cutters.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

ISO 26622-2:2008 specifies the dimensions for modular taper interface with ball track system: tapered receivers for automatic and manual tool exchange to be applied on machine tools (e.g. lathe machines, drilling machines, milling machines and turn/milling machine centres). A range of receiver sizes is specified.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

This European Standard sets out the requirements and/or measures to remove the hazards and limit the risk on work holding chucks which are defined in 3.1.
This European standard covers all the hazards relevant to this component.
These hazards are listed in clause 4.
The requirements of this standard concern designers, manufacturers, suppliers and importers of work holding chucks.
This standard also includes information which the manufacturer shall provide to the user.
This standard is primarily directed to components which are manufactured after the date of issue of this standard.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard sets out the requirements and/or measures to remove the hazards and limit the risk on work holding chucks which are defined in 3.1.
This European standard covers all the hazards relevant to this component.
These hazards are listed in clause 4.
The requirements of this standard concern designers, manufacturers, suppliers and importers of work holding chucks.
This standard also includes information which the manufacturer shall provide to the user.
This standard is primarily directed to components which are manufactured after the date of issue of this standard.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 5415:2007 specifies the dimensions of reduction sleeves with 7/24 external taper No. 30-40-45-50 and 60 and Morse internal taper No. 1 to 6 (Morse taper No. 4, 5 and 6 being either with positive drive or without positive drive). These sleeves permit driving of tools with Morse taper shanks with tapped holes with the aid of an internal screw. The form of this screw and its fixation in the sleeve are left to the manufacturer's discretion. 7/24 tapers are in accordance with ISO 297. Morse tapers are in accordance with ISO 296 and ISO 5413.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

ISO 702-2:2007 specifies the sizes for interchangeability of cylindrical spindle noses and corresponding connecting faces of face plates or work holding chucks.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

ISO 702-3:2007 specifies the sizes for interchangeability of bayonet-type lathe spindle noses and corresponding face plates.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off

ISO 7388-1:2007 specifies the dimensions of tool shanks with a 7/24 taper, of shank forms A, AD, AF, U, UD and UF (with two possible additions for each), for automatic tool changers, used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off

ISO 7388-2:2007 specifies the dimensions of tool shanks with a 7/24 taper of shank form J (with two possible additions for each) for automatic tool changers, used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off

ISO 3442-3:2007 specifies 90° and 60° serrations and jaw nuts applicable to 90° and 60° serrations for mounting the top jaws on the base jaws of power chucks, in order to ensure interchangeability. It also describes, with reference to ISO 230-1, the geometric tests for self-centring, power-operated chucks with two or more two-piece jaws (serrated type), and the corresponding tolerances which apply.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off

ISO 839-1:2006 specifies the dimensions of milling machine arbors with 7/24 tapers in accordance with ISO 297. It also specifies the designation of these arbors.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

ISO 3089:2005 specifies, with reference to ISO 230-1, the geometric tests and corresponding tolerances for self-centring, manually-operated chucks for machine tools with more than two jaws. This type of chuck has jaws known as "one-piece hard jaws", the relatively large stroke of which allows quick adaptation to the most varied sizes of workpieces without dismounting. ISO 3089:2005 deals only with the inspections of rotational accuracy of the chuck, the straightening and the centring of workpieces. It is not applicable to other dynamic quantities, such as measurement of counterbalancing or measurements gripping powers.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off

ISO 3442-1:2005 specifies the sizes for interchangeability of self-centring, manually operated chucks with two-piece jaws (tongue and groove type) and describes, by reference to ISO 230-1, the geometric tests for such chucks. It also specifies the tolerances which apply to these tests.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

ISO 3442-2:2005 specifies the sizes for interchangeability of self-centring, power-operated chucks with two-piece jaws (tongue and groove type) and describes, by reference to ISO 230-1, the geometric tests for such chucks. It also specifies the tolerances which apply to these tests.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

ISO 10889-1:2004 specifies the interchangeability dimensions of the cylindrical shank and location bore, and the dimensions related to data medium, of tool holders. It also specifies the technical delivery conditions of the tool holders. It is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

ISO 702-4:2004 specifies the sizes for interchangeability of cylindrical spindle noses and corresponding connecting faces of face plates or work holding chucks.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off