ASTM B517-05
(Specification)Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
ABSTRACT
This specification covers welded, cold-worked, and annealed nickel-chromium-iron alloy (UNS N06600, N06603, N06025, and N06045) pipe for general corrosive service and heat-resisting applications. This specification covers outside diameter and nominal wall pipe in accordance to referenced ASTM and ANSI documents itemized herein. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification. Pipe shall be made from flat-rolled alloy by an automatic welding process with no addition of filler metal. Subsequent to welding and prior to final heat treatment, the material shall be cold worked either in both weld and base metal or in weld metal only. Pipe shall be furnished with a scale-free finish. When bright annealing is used, descaling is not necessary. The material shall conform to the chemical requirements for nickel, chromium, iron, manganese, carbon, copper, silicon, sulfur, aluminum, titanium, phosphorus, zirconium, yttrium, and cerium. The material shall conform to the mechanical property requirements for tensile strength, yield strength, and elongation. The pipe shall be tested using the following: flattening test, nondestructive test requirements, and transverse guided bend test.
SCOPE
1.1 This specification covers welded, cold-worked, and annealed nickel-chromium-iron alloy (UNS N06600,* N06603, N06025, and N06045) pipe for general corrosive service and heat-resisting applications.
1.2 This specification covers outside diameter and nominal wall pipe shown in ANSI B36.19. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification.
1.3 The values stated in inch-pound units are to be regarded as the standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: B 517 – 05
Standard Specification for
Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS
1
N06603, UNS N06025, and UNS N06045) Pipe
This standard is issued under the fixed designation B 517; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope* 2.2 ANSI Standard:
4
2 B36.19 Stainless Steel Pipe
1.1 This specification covers welded, cold-worked, and
annealed nickel-chromium-iron alloy (UNS N06600,*
3. Terminology
N06603, N06025, and N06045) pipe for general corrosive
3.1 Terms defined in Terminology B 899 shall apply unless
service and heat-resisting applications.
defined otherwise in this standard.
1.2 This specification covers outside diameter and nominal
wall pipe shown in ANSI B36.19. Pipe having other dimen-
4. General Requirement
sions may be furnished provided such pipe complies with all
4.1 Material furnished in accordance with this specification
other requirements of this specification.
shall conform to the applicable requirements of the current
1.3 The values stated in inch-pound units are to be regarded
edition of Specification B 775 unless otherwise provided
as the standard.
herein.
1.4 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
5. Ordering Information
responsibility of the user of this standard to become familiar
5.1 It is the responsibility of the purchaser to specify all
with all hazards including those identified in the appropriate
requirements that are necessary for the safe and satisfactory
Material Safety Data Sheet (MSDS) for this product/material
performance of material ordered under this specification.
as provided by the manufacturer, to establish appropriate
Examples of such requirements include, but are not limited to,
safety and health practices, and determine the applicability of
the following:
regulatory limitations prior to use.
5.1.1 Alloy name or UNS number.
5.1.2 ASTM designation and year of issue.
2. Referenced Documents
5.1.3 Condition (temper).
3
2.1 ASTM Standards:
5.1.4 Dimensions:
B 775 Specification for General Requirements for Nickel
5.1.4.1 Nominal pipe size or outside diameter and schedule
and Nickel Alloy Welded Pipe
number or nominal wall thickness.
B 899 Terminology Relating to Non-ferrous Metals and
5.1.4.2 Length (specific or random).
Alloys
5.1.5 Quantity (feet or metres, or number of pieces).
5.1.6 Certification—State if certification or a report of test
1
This specification is under the jurisdiction of ASTM Committee B02 on
results is required.
Nonferrous Metals and Alloys and is the direct responsibility of Subcommittee
5.1.7 Samples for Product (Check) Analysis—State whether
B02.07 on Refined Nickel and Cobalt and Their Alloys.
samples for product (check) analysis should be furnished.
Current edition approved Nov. 1, 2005. Published November 2005. Originally
approved in 1970. Last previous edition approved in 2003 as B 517 – 03. 5.1.8 Purchaser Inspection—If the purchaser wishes to
2
For ASME Boiler and Pressure Code applications see related Specification
witness tests or inspection of material at the place of manu-
SB-517 in Section II of that Code.
facture, the purchase order must so state indicating which tests
* New designation established in accordance withASTM E 527 and SAE J1086,
or inspections are to be witnessed.
Practice for Numbering Metals and Alloys (UNS).
3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
4
Standards volume information, refer to the standard’s Document Summary page on Available fromAmerican National Standards Institute (ANSI), 25 W. 43rd St.,
the ASTM website. 4th Floor, New York, NY 10036.
*ASummary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
B517–05
TABLE 1 Chemical Requirements
Composition Product (Check) Analysis
Limits,% Variations, under min or
Element
over max, of the
N06600 N06603 N06025 N06045
Specified Limit of Element
A
Nickel 72.0 min Bal Bal 45.0 min 0.45
Chromium 14.0 min 24.0–26.0 24.0–26.0 26.0–29.0 0.15
17.0 max 0.25
Iron 6.0 min 8.0–11.0 8.0–11.0 21.0–25.0 0.10
10.0 max 0.10
Manganese 1.0 0.15 max 0.15 max 1.0 max 0.03
Carbon 0.15 max 20.0-40.0 0.15–0.25 0.05–0.12 0.01
Copper 0.5 max 0.50 max 0.10 max 0.3 max 0.03
Silicon 0.5 max 0.50 max 0.5 max 2.5–3.0 0.03
Sulfur 0.015 max 0.010 max 0.010 max 0.010 max 0.003
Aluminum . 2.4-3.0 1.8–2.4 .
Titanium
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.