iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM F1712-11

(Specification)

Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications (Withdrawn 2015)

Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications (Withdrawn 2015)

ABSTRACT
This specification covers chain-link fencing material applications for high security applications. Fabric shall be attached with tie wires or other appropriate fasteners. Fabric shall be attached with tie wires or other appropriate fasteners. Fabric, shall be attached to the terminal post using tension bars with tension bands or vertical straps. Barbed wire shall be installed, in accordance with the requirement, with one or more strands, depending on the degree of security required, or in conjunction with the use of barbed tape obstacles. Fabric shall be secured to tension wire using steel hog rings.
SCOPE
1.1 This specification covers chain-link fencing material applications for high security applications.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
WITHDRAWN RATIONALE
This specification covers chain-link fencing material applications for high security applications.
Formerly under the jurisdiction of Committee F14 on Fences, this guide was withdrawn in July 2015 and replaced by Guide F2611 on the Design and Construction of Chain Link Security Fencing.1

General Information

Status
Withdrawn
Publication Date
31-May-2011
ICS
91.090 - External structures
Technical Committee
F14 - Fences
Drafting Committee
F14.50 - High Security Fences and Perimeter Barriers
Current Stage
Ref Project

Relations

Replaced By
ASTM F2611-15 - Standard Guide for Design and Construction of Chain Link Security Fencing
Effective Date
12-Aug-2015
Referred By
ASTM F1553-11(2022) - Standard Guide for Specifying Chain Link Fence
Effective Date
01-Jun-2011

Buy Standard

ASTM F1712-11 - Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications (Withdrawn 2015)ASTM F1712-11 - Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications (Withdrawn 2015)
PreviousNext
Technical specification
ASTM F1712-11 - Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications (Withdrawn 2015)
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:F1712 −11
StandardSpecification for
Steel Chain-Link Fencing Materials Used for High Security
1
Applications
This standard is issued under the fixed designation F1712; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope F1379 Terminology Relating to Barbed Tape
F1664 Specification for Poly(Vinyl Chloride) (PVC) and
1.1 This specification covers chain-link fencing material
Other Conforming Organic Polymer-Coated SteelTension
applications for high security applications.
Wire Used with Chain-Link Fence
1.2 The values stated in inch-pound units are to be regarded
F1665 Specification for Poly(Vinyl Chloride) (PVC) and
as standard. The values given in parentheses are mathematical
Other Conforming Organic Polymer-Coated Steel Barbed
conversions to SI units that are provided for information only
Wire Used With Chain-Link Fence
and are not considered standard.
F1910 Specification for Long Barbed Tape Obstacles
F1911 Practice for Installation of Barbed Tape
2. Referenced Documents
F2200 Specification for Automated Vehicular Gate Con-
2
2.1 ASTM Standards:
struction
A121 Specification for Metallic-Coated Carbon Steel
2.2 UL Standard:
Barbed Wire
UL 325 Door, Drapery, Gate, Louver, and Window Opera-
3
A392 Specification for Zinc-Coated Steel Chain-Link Fence
tors and Systems
Fabric
2.3 Chain Link Fence Manufacturers Institute:
A491 Specification for Aluminum-Coated Steel Chain-Link
WLG 2445 Chain Link Fence Wind Load Guide for the
4
Fence Fabric
Selection of Line Post and Line Post Spacing
A824 Specification for Metallic-Coated Steel Marcelled
Tension Wire for Use With Chain Link Fence
3. Significance and Use
F567 Practice for Installation of Chain-Link Fence
3.1 Typical end users of this specification require higher
F626 Specification for Fence Fittings
than normal security.
F668 Specification for Polyvinyl Chloride (PVC), Polyolefin
and Other Polymer-Coated Steel Chain Link Fence Fabric
4. Materials and Manufacture
F900 Specification for Industrial and Commercial Steel
4.1 Framework—Shall meet the size and strength require-
Swing Gates
ments in Specification F1043, Table 3, for heavy industrial
F934 Specification for Colors for Polymer-Coated Chain
fence framework. Where icing conditions and high wind loads
Link Fence Materials
are prevalent, fences using small security mesh, or fences
F1043 Specification for Strength and Protective Coatings on
higher than 12 ft (3.7 m), determine the post size and spacing
Steel Industrial Fence Framework
using WLG 2445. Horizontal top, mid or bottom rails if
F1184 Specification for Industrial and Commercial Horizon-
specified shall be 1.660-in. (42-mm) O.D., or roll-formed
tal Slide Gates
1 5
section 1 ⁄4 by 1 ⁄8 in. (32 by 41 mm). Framework may be
F1345 Specification for Zinc-5 % Aluminum-Mischmetal
polymer-coated and color shall be one of the choices listed in
Alloy-Coated Steel Chain-Link Fence Fabric
SpecificationF934.Frameworkcoatingsshallbeinaccordance
with Specification F1043.
1
This specification is under the jurisdiction ofASTM Committee F14 on Fences 4.2 Fabric—Chain link fabric shall conform to Specifica-
and is the direct responsibility of Subcommittee F14.50 on High Security Fences
tions A392, A491, F668,or F1345. Mesh larger than 1 in. (25
and Perimeter Barriers.
mm) shall be 6- gauge, 0.192 in. (4.88 mm) or 9-gauge, 0.148
Current edition approved June 1, 2011. Published June 2011. Originally
approved in 1996. Last previous edition approved in 2006 as F1712 - 06. DOI:
10.1520/F1712-11.
2 3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or Available from Underwriters Laboratories (UL), 2600 N.W. Lake Rd., Camas,
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM WA 98607-8542, http://www.ul.com.
4
Standards volume information, refer to the standard’s Document Summary page on AvailablefromChainLinkFenceManufacturersInstitute,10015OldColumbia
the ASTM website. Road, Suite B-215, Columbia, MD 21046, http://www.chainlinkinfo.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F1712−11
in. (3.76 mm), 1-in. mesh shall be 9-gauge mesh smaller than gate specialists for motor type, controls, locking capabilities
1 in. shall be 11-gauge, 0.120 in. (3.05 mm) or 9-gauge, 0.148 and related security issues.Automated gates shall comply with
in. (3.76 mm). F2200 and UL 325.
4.9 Accessories—If accessories such as electronic sensors,
NOTE 1—The various chain link fabric specifications list fabric heights
up to and in
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM F1345-10a(2023)(Specification)
Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

ABSTRACT
This specification covers the physical requirements for zinc-5 % aluminum-mischmetal (Zn-5Al-MM) alloy-coated steel chain-link fence fabric before weaving. The physical properties to which the fabric should conform are weave form, size of mesh, size of wire, height of fabric, selvage, weight of coating, workmanship, and standard length of rolls.
SCOPE
1.1 This specification covers zinc-5 % aluminum-mischmetal (Zn-5A1-MM) alloy-coated steel chain-link fence fabric, Zn-5A1-MM alloy-coated, before weaving.  
1.2 The values stated in inch-pound units are to be regarded as the standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM F626-14(2023)(Specification)
Standard Specification for Fence Fittings

ABSTRACT
This specification covers the materials, coating requirements, and inspection of the following fence accessories that are used for chain-link fences: post and line caps; rail and brace ends; top rail sleeves; tie wires, clips, and fasteners; tension and brace bands; tension bars; truss rod assembly; barbed wire arms; color coating of fittings; and fitting size terminology.
SCOPE
1.1 This specification covers the materials, coating requirements, and inspection of fence accessories for chain-link fence for the following:  
1.1.1 Post and line caps,  
1.1.2 Rail and brace ends,  
1.1.3 Top rail sleeves,  
1.1.4 Tie wires, clips, and fasteners,  
1.1.5 Tension and brace bands,  
1.1.6 Tension bars,  
1.1.7 Truss rod assembly,  
1.1.8 Barbed wire arms,  
1.1.9 Color coating of fittings, and  
1.1.10 Fitting size terminology.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off
ASTM
ASTM F567-23(Practice)
Standard Practice for Installation of Chain-Link Fence

ABSTRACT
This practice establishes the standard installation procedures for chain-link fences. It includes site preparation, post location, post setting, and terminal post bracing measures. Also included here are the detailed requirements for the top rail and tension wire, tie wires and clips, chain-link fabric, barbed wires, and gates.
SCOPE
1.1 This practice covers the installation procedure for chain-link fence.  
1.2 This practice is intended primarily to guide those responsible for or concerned with the installation of chain-link fence.  
1.3 This practice does not intend to preclude any practice that has proven equal to or given better performance under varying conditions, that is, location, weather, intended use, materials, etc.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 13.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM F1184-23(Specification)
Standard Specification for Industrial and Commercial Horizontal Slide Gates

ABSTRACT
This specification covers the material, design, and dimensional requirements for horizontal slide chain link fence gates, gate posts, and other accessories and components for industrial and commercial applications. The horizontal slide gates covered here shall be of the following types: Type I—overhead slide gates that are supported only from above; and Type II—cantilever slide gates spanning an opening lacking a top or bottom support within that opening. Furthermore, Type II gates shall be supplied in any of the two classes as follows: Class 1— steel frame gates and aluminum frame gates using external rollers; and Class 2— frame gates and aluminum frame gates using internal rollers. Gates of either type and class shall conform to material and manufacture requirements specified for zinc-coated steel frames, aluminum alloy gate frames, polymer-coated steel or aluminum frames, chain link gate fabric, barbed wire top, and barbed tape. Type I gates shall additionally meet the specified requirements for materials and manufacture, shape and size, dimension and weight, gate posts, gate support members, roller assembly, gate extensions, and gate extension bracing. Conversely, Type II gates shall additionally meet the specified requirements for shape and size, gate posts, guide posts (for Class 1 only), roller assembly (external and internal rollers, top roller guards, and bottom protective plates), performance criteria, field adjustment, and latching.
SCOPE
1.1 This specification covers detailed requirements for rolling, cantilever and overhead slide gates, gate posts, and accessories for industrial and commercial applications.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are for information only.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off
  • Technical specification
    5 pages
    English language
    sale 15% off
ASTM
ASTM F1184-23e1(Specification)
Standard Specification for Industrial and Commercial Horizontal Slide Gates

ABSTRACT
This specification covers the material, design, and dimensional requirements for horizontal slide chain link fence gates, gate posts, and other accessories and components for industrial and commercial applications. The horizontal slide gates covered here shall be of the following types: Type I—overhead slide gates that are supported only from above; and Type II—cantilever slide gates spanning an opening lacking a top or bottom support within that opening. Furthermore, Type II gates shall be supplied in any of the two classes as follows: Class 1— steel frame gates and aluminum frame gates using external rollers; and Class 2— frame gates and aluminum frame gates using internal rollers. Gates of either type and class shall conform to material and manufacture requirements specified for zinc-coated steel frames, aluminum alloy gate frames, polymer-coated steel or aluminum frames, chain link gate fabric, barbed wire top, and barbed tape. Type I gates shall additionally meet the specified requirements for materials and manufacture, shape and size, dimension and weight, gate posts, gate support members, roller assembly, gate extensions, and gate extension bracing. Conversely, Type II gates shall additionally meet the specified requirements for shape and size, gate posts, guide posts (for Class 1 only), roller assembly (external and internal rollers, top roller guards, and bottom protective plates), performance criteria, field adjustment, and latching.
SCOPE
1.1 This specification covers detailed requirements for rolling, cantilever and overhead slide gates, gate posts, and accessories for industrial and commercial applications.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are for information only.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off
ASTM
ASTM F2408-16(2023)(Specification)
Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets

ABSTRACT
This specification establishes the minimum requirements for coated tubular picket ornamental fence systems fabricated from galvanized steel components. Steel material for tubular picket ornamental fence system structural components shall be galvanized by the hot-dip process, either after forming, or prior to forming. Powder coatings applied to the exterior surface of fence components shall be polymer material: polyester or epoxy and polyester combinations. Wet coating applied to the exterior surface of fence components shall be a two-coat paint application system (one coat of epoxy, polyester or polyurethane primer; one coat of polyester, polyurethane, or acrylic liquid). Fittings, fasteners, and decorative accessories for ornamental steel fence systems shall be manufactured with a material and finish coating that meets the same protective coating performance requirements as required for panels and posts. Four structural test methods shall be conducted: Method A which is application of horizontal concentrated load, Method B which is application of vertical concentrated load, Method C which is application of horizontal thrust load to infill areas, and Method D which is application of horizontal cone penetration load. Different tests shall also be performed in order to determine the following properties of the fence system coatings: adhesion, corrosion resistance, impact resistance, and weathering resistance.
SCOPE
1.1 This specification establishes the minimum requirements for coated tubular picket ornamental fence systems fabricated from galvanized steel components.  
1.2 The requirements of this specification do not apply to vertical bar fence systems utilizing solid bar or wrought iron materials.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
ASTM
ASTM F1043-18(2022)(Specification)
Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

ABSTRACT
This specification covers the strength and protective coating requirements for industrial steel chain link fence framework. Maximum allowable heights of framework and post spacing are to be based on chain link fence fabric mesh size and gages, and specified wind loads. Coatings shall be classified as: external coatings (Type A, B, and C) and internal coatings (Type A, B, C, and D). Zinc used for coating shall be any grade of zinc conforming to the requirements and shall be applied by the hot-dip method. Strength test, tension test, adhesion test, and cross hatch test shall be performed to meet the specified requirements.
SCOPE
1.1 This specification covers the strength and protective coating requirements for industrial steel fence framework. The intended use is for all types of fence, including but not limited to, chain link, expanded metal, wire mesh both welded and woven, PVC, and wood. Consult fencing product manufacturer for post spacing requirements. Post spacings for chain link fence are not to exceed 10 ft. (For additional information, see CLFMI Guide WLG2445.)  
1.1.1 Caution Regarding Windload—If additives to the fence, such as windscreen, inserts, or signage are required, it is advisable to use stronger framework and fittings, to reduce the on-center spacing of posts, or to add back bracing. Factors to consider when determining windload include the type of screening material to be used, area of fence to be covered, and local wind conditions.  
1.2 Posts and rails may have any cross-sectional shape meeting the requirements herein. The shapes may be formed and welded, cold formed, hot rolled, or extruded.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    8 pages
    English language
    sale 15% off
ASTM
ASTM F668-17(2022)(Specification)
Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric

ABSTRACT
This specification covers polyvinyl chloride and other conforming organic polymer-coated steel chain-link fabric, coated before weaving. Fabric produced from three classes of wire coatings are covered as follows: Class I consists of polymer coatings extruded over zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire; Class 2a consists of polymer coating extruded and adhered to zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire; Class 2b consists of polymer coating fused and adhered to zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire. Materials shall be tested and the individual grades shall conform to material, weave, mesh size, diamond count, wire size, fabric height, selvage, breaking strength, weight of Zinc, Aluminum, or Zinc-5 % Aluminum-Mischmetal Alloy Coatings, polymer coating thickness, polymer-coated wire, and roll length.
SCOPE
1.1 This specification covers polyvinyl chloride and other conforming organic polymer-coated steel chain-link fabric, coated before weaving. Polyvinyl chloride, polyolefin, and other organic polymer coating hereinafter will be designated as polymer coating.  
1.2 Fabric produced from three classes of wire coatings are covered as follows:  
1.2.1 Class I consists of polymer coatings extruded over zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire.  
1.2.2 Class 2a consists of polymer coating extruded and adhered to zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire.  
1.2.3 Class 2b consists of polymer coating fused and adhered to zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire.  
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    6 pages
    English language
    sale 15% off
ASTM
ASTM F1665-08(2022)(Specification)
Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

ABSTRACT
This specification covers poly(vinyl chloride)(PVC) and other conforming organic polymer-coated steel barbed wire consisting of two polymer-coated strands, with four-point barbs of zinc-coated steel or aluminum alloy wire used with chain-link fence. PVC and other organic polymer coatings hereinafter will be designated as polymer coating. Barbed wire strand wire, produced from three classes of wire coatings, is covered as follows: class 1 - polymer coating extruded over zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire; class 2a - polymer coating extruded and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire; and class 2b - polymer coating fused and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire. Polymer-coated steel barbed wire is supplied in a choice of two types as follows: type I - standard, and type II - high security. Breaking strength of the stranded barbed wire shall be tested to meet the requirements prescribed. Adhesion test, accelerated aging test, and color test shall be made to meet the requirements prescribed.
SCOPE
1.1 This specification covers PVC and other conforming organic polymer-coated steel barbed wire consisting of two polymer-coated strands, with four-point barbs of zinc-coated steel or aluminum alloy wire. PVC and other organic polymer coatings hereinafter will be designated as polymer coating.  
1.2 Barbed wire strand wire, produced from three classes of wire coatings, is covered as follows:  
1.2.1 Class 1, consisting of a polymer coating extruded over zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire;  
1.2.2 Class 2a, consisting of a polymer coating extruded and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire; and  
1.2.3 Class 2b, consisting of a polymer coating fused and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire.  
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM F1664-08(2022)(Specification)
Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

ABSTRACT
This specification deals with poly(vinyl chloride), PVC and other conforming organic polymer-coated steel tension wire for use with chain-link fence. Tension wire, produced from three classes of wire coatings, is covered as follows: Class 1, consisting of a polymer coating extruded over zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire; Class 2a, consisting of a polymer coating extruded and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire; and Class 2b, consisting of a polymer coating fused and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire. Materials shall be tested and the individual grades shall conform to specified values of wire size, breaking strength, metallic coating weight, PVC coating thickness, polymer-coated tension wire properties, and coil length.
SCOPE
1.1 This specification covers PVC and other conforming organic polymer-coated steel tension wire for use with chain link fence. PVC and other organic polymer coatings hereinafter will be designated as polymer coating.  
1.2 Tension wire, produced from three classes of wire coatings, is covered as follows:  
1.2.1 Class 1, consisting of a polymer coating extruded over zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire;  
1.2.2 Class 2a, consisting of a polymer coating extruded and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire; and  
1.2.3 Class 2b, consisting of a polymer coating fused and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire.  
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off