ASTM E329-10

Standard Specification for Agencies Engaged in Construction Inspection, Special Inspection, or Testing Materials Used in Construction

ABSTRACT
This specification defines the minimum requirements for inspection agency personnel or testing agency laboratory personnel, or both, and the minimum technical requirements for equipment and procedures utilized in the testing and inspection of construction and materials used in construction. Criteria provided herein shall be used for evaluating the capability of the agency to properly perform designated tests on construction materials, as well as establishing essential characteristics pertaining to the organization, personnel, facilities, and quality systems of the agency.
SIGNIFICANCE AND USE
The testing and inspection of construction materials is an important element in obtaining quality construction. A testing and inspection agency must be selected with care after a comprehensive evaluation of its competency to perform the work properly.
This standard provides basic minimum criteria for use in evaluating the qualifications of technically oriented testing or inspection agencies, or both. The criteria may be supplemented by more specific criteria and requirements for particular classes of testing or types of inspection agencies. An individual user can also use it to judge the competency of an agency.
The intent of this standard is to provide a consensus system standardized basis for requirements for a technically oriented testing or inspection agency, with respect to the agency's capability to objectively and competently provide the specific services needed by the user without prejudice.
Typically, evaluating an agency involves the following three essential sequential phases:
Submittal of basic information in accordance with the criteria of this specification to the evaluator by an agency desiring to be qualified to this standard,
Evaluation of the agency-submitted information, and
On-site verification of the agency-submitted information by the user or a qualified national authority.
SCOPE
1.1 This specification defines the minimum requirements for inspection agency personnel or testing agency laboratory personnel, or both, and the minimum technical requirements for equipment and procedures utilized in the testing and inspection of construction and materials used in construction.
1.2 Criteria is provided for evaluating the capability of agency to properly perform designated tests on construction materials, and establishes essential characteristics pertaining to the organization, personnel, facilities, and quality systems of the agency. This specification may be supplemented by more specific criteria and requirements for particular projects.
1.3 This specification can be used as a basis to evaluate an agency and is intended for use in qualifying and/or accrediting agencies, public or private, engaged in the testing and inspection of construction and materials. Building officials can use Specification E329 as a tool in the qualification and establishment of competency of inspection and testing agencies in the fields covered by Specification E329.
1.4 A certificate of accreditation, including the scope of accreditation, is required to comply with this standard.
1.5 The users of an accredited agency must review the agency's scope of accreditation to ensure the agency has been accredited for its technical competence to perform the specific tests or inspections requested by the user.

General Information

• Status: Historical
• Publication Date: 14-Dec-2010
• ICS: 91.100.01 - Construction materials in general
• Technical Committee: E36 - Accreditation & Certification
• Drafting Committee: E36.70 - Agencies Performing Construction Inspection, Testing and Special Inspection

Relations

• Replaces: ASTM E329-09 - Standard Specification for Agencies Engaged in Construction Inspection and/or Testing
• Effective Date: 15-Dec-2010
• Replaced By: ASTM E329-11 - Standard Specification for Agencies Engaged in Construction Inspection, Special Inspection, or Testing Materials Used in Construction
• Effective Date: 15-Mar-2011
• Referred By: ASTM D3740-19 - Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
• Effective Date: 15-Dec-2010
• Referred By: ASTM C1077-17 - Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
• Effective Date: 15-Dec-2010
• Referred By: ASTM D3666-16 - Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
• Effective Date: 15-Dec-2010
• Referred By: ASTM E699-16 - Standard Specification for Agencies Involved in Testing, Quality Assurance, and Evaluating of Manufactured Building Components
• Effective Date: 15-Dec-2010
• Referred By: ASTM E543-21 - Standard Specification for Agencies Performing Nondestructive Testing
• Effective Date: 15-Dec-2010
• Referred By: ASTM E2833-12(2018) - Standard Practice for Certification Bodies that Certify Personnel Engaged in Inspection and Testing of Construction Activities and Materials Used in Construction, Including Special Inspection
• Effective Date: 15-Dec-2010
• Referred By: ASTM A627-03(2019) - Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
• Effective Date: 15-Dec-2010
• Referred By: ASTM E2353-21 - Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
• Effective Date: 15-Dec-2010

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation: E329 – 10
Standard Specification for
Agencies Engaged in Construction Inspection, Special
1
Inspection, or Testing Materials Used in Construction
This standard is issued under the fixed designation E329; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope* Laboratories and Organizations for Examination and In-
3
spection of Steel, Stainless Steel, and Related Alloys
1.1 Thisspecificationdefinestheminimumrequirementsfor
C1077 Practice for Laboratories Testing Concrete and Con-
inspection agency personnel or testing agency laboratory
crete Aggregates for Use in Construction and Criteria for
personnel, or both, and the minimum technical requirements
Laboratory Evaluation
for equipment and procedures utilized in the testing and
C1093 Practice for Accreditation of Testing Agencies for
inspection of construction and materials used in construction.
Masonry
1.2 Criteria is provided for evaluating the capability of
D3666 Specification for Minimum Requirements forAgen-
agency to properly perform designated tests on construction
cies Testing and Inspecting Road and Paving Materials
materials, and establishes essential characteristics pertaining to
D3740 Practice for Minimum Requirements for Agencies
the organization, personnel, facilities, and quality systems of
Engaged in Testing and/or Inspection of Soil and Rock as
the agency. This specification may be supplemented by more
Used in Engineering Design and Construction
specific criteria and requirements for particular projects.
E4 Practices for Force Verification of Testing Machines
1.3 This specification can be used as a basis to evaluate an
E543 Specification for Agencies Performing Nondestruc-
agency and is intended for use in qualifying and/or accrediting
tive Testing
agencies, public or private, engaged in the testing and inspec-
E605 Test Methods for Thickness and Density of Sprayed
tion of construction and materials. Building officials can use
Fire-Resistive Material (SFRM) Applied to Structural
Specification E329 as a tool in the qualification and establish-
Members
ment of competency of inspection and testing agencies in the
E736 Test Method for Cohesion/Adhesion of Sprayed Fire-
fields covered by Specification E329.
Resistive Materials Applied to Structural Members
1.4 A certificate of accreditation, including the scope of
E994 Guide for Calibration and Testing Laboratory Ac-
accreditation, is required to comply with this standard.
creditation Systems General Requirements for Operation
1.5 The users of an accredited agency must review the
3
and Recognition
agency’s scope of accreditation to ensure the agency has been
E1513 Practice for Application of Sprayed Fire-Resistive
accredited for its technical competence to perform the specific
Materials (SFRMs)
tests or inspections requested by the user.
E2174 Practice for On-Site Inspection of Installed Fire
2. Referenced Documents Stops
2
E2393 Practice for On-Site Inspection of Installed Fire
2.1 ASTM Standards:
Resistive Joint Systems and Perimeter Fire Barriers
A880 Practice for Criteria for Use in Evaluation of Testing
2.2 AASHTO Standard:
R18 Standard Recommended Practice for Establishing and
1
This specification is under the jurisdiction of ASTM Committee E36 on
Implementing a Quality System for Construction Materi-
Accreditation & Certification and is the direct responsibility of Subcommittee 4
als Testing Laboratories
E36.70 on Agencies Performing Construction Inspection, Testing and Special
2.3 ANSI/ISO/IEC Standard:
Inspection.
Current edition approved Dec. 15, 2010. Published January 2011. Originally
approved in 1967. Last previous edition approved in 2009 as E329–09. DOI:
3
10.1520/E0329-10. Withdrawn. The last approved version of this historical standard is referenced
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or on www.astm.org.
4
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Available from American Association of State Highway and Transportation
Standards volume information, refer to the standard’s Document Summary page on Officials (AASHTO), 444 N. Capitol St., NW, Suite 249, Washington, DC 20001,
the ASTM website. http://www.transportation.org.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
E329 – 10
17020 General Criteria for t
...

This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
An American National Standard
Designation:E329–09 Designation: E329 – 10
Standard Specification for
Agencies Engaged in Construction Inspection and/or
TestingAgencies Engaged in Construction Inspection,
Special Inspection, or Testing Materials Used in
1
Construction
This standard is issued under the fixed designation E329; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope*
1.1 This specification defines the minimum requirements for inspection agency personnel or testing agency laboratory
personnel, or both, and the minimum technical requirements for equipment and procedures utilized in the testing and inspection
of construction and materials used in construction.
1.2 Criteria is provided for evaluating the capability of agency to properly perform designated tests on construction materials,
and establishes essential characteristics pertaining to the organization, personnel, facilities, and quality systems of the agency.This
specification may be supplemented by more specific criteria and requirements for particular projects.
1.3 This specification can be used as a basis to evaluate an agency and is intended for use in qualifying and/or accrediting
agencies, public or private, engaged in the testing and inspection of construction and materials. Building officials can use
Specification E329 as a tool in the qualification and establishment of competency of inspection and testing agencies in the fields
covered by Specification E329.
1.4 A certificate of accreditation, including the scope of accreditation, is required to comply with this standard.
1.5 The users of an accredited agency must review the agency’s scope of accreditation to ensure the agency has been accredited
for its technical competence to perform the specific tests or inspections requested by the user.
2. Referenced Documents
2
2.1 ASTM Standards:
A880 Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of
Steel, Stainless Steel, and Related Alloys
C1077 Practice for LaboratoriesTesting Concrete and ConcreteAggregates for Use in Construction and Criteria for Laboratory
Evaluation
C1093 Practice for Accreditation of Testing Agencies for Masonry
D3666 Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
D3740 Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in
Engineering Design and Construction
E4 Practices for Force Verification of Testing Machines
E543 Specification for Agencies Performing Nondestructive Testing
E605 Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E736 Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
E994 Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and
Recognition
E1513 Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
E2174 Practice for On-Site Inspection of Installed Fire Stops
1
This specification is under the jurisdiction of ASTM Committee E36 on Accreditation & Certification and is the direct responsibility of Subcommittee E36.70 on
Construction and Building Testing/Inspection Agencies.
Current edition approved Nov. 1, 2009. Published December 2009. Originally approved in 1967. Last previous edition approved in 2008 as E329–08. DOI:
10.1520/E0329-09.on Agencies Performing Construction Inspection, Testing and Special Inspection .
Current edition approved Dec. 15, 2010. Published January 2011. Originally approved in 1967. Last previous edition approved in 2009 as E329–09. DOI:
10.1520/E0329-10.
2
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
E329 – 10
E2393 Practice for On-Site Inspection o
...