Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

ABSTRACT
This specification establishes the requirements for copper and copper die forgings produced by hot pressing method. The forgings included here are designated with the following Copper or Copper Alloy UNS Nos.: C11000 (copper), C14500 (copper-tellurium alloy), C14700 (copper-sulfur alloy), C36500 (leaded Muntz metal), C37000 (free-cutting Muntz metal), C37700 (forging brass), C46400 (naval brass), C48200 (medium leaded naval brass), C48500 (leaded naval brass), C61900 (aluminum bronze), C62300 (9% aluminum bronze), C63000 and C63200 (aluminum-nickel bronze), C64200 (aluminum-silicon bronze), C64210 (6.7% aluminum-silicon bronze), C65500 (high-silicon bronze), C67500 (manganese bronze), C67600, C69300 (copper-zinc-silicon alloy), C70620 (90% copper-10% nickel alloy), C71520 (70% copper-30% nickel alloy), and C77400 (45% nickel-10% silver alloy). The materials for manufacture shall be rods, billets, or blanks of such purity and soundness as to be suitable for processing by hot pressing. Products shall be tested to examine their conformance to mechanical (tensile and yield strengths, and elongation), dimensional, and chemical composition requirements.
SCOPE
1.1 This specification establishes the requirements for copper and copper alloy die forgings produced by the hot pressing method. The following copper and copper alloys are included:    
Copper or Copper Alloy  
UNS No.  
Name  
C11000  
copper    
C14500  
copper-tellurium    
C14700  
copper-sulfur    
C27450  
plumbing brass  
C27451  
plumbing brass  
C27453  
copper zinc alloy  
C35330  
leaded brass  
C36500  
leaded Muntz metal  
C37000  
free-cutting Muntz metal  
C37700  
forging brass  
C46400  
naval brass  
C46750  
tin brass  
C48200  
medium leaded naval brass  
C48500  
leaded naval brass  
C48600  
naval brass  
C49250  
copper-zinc-bismuth alloy  
C49255  
copper-zinc-bismuth-nickel alloy  
C49260  
copper-zinc-bismuth alloy  
C49265  
copper-zinc-tin-bismuth, low leaded  
C49300  
copper-zinc-tin-bismuth alloy  
C49340  
copper-zinc-tin-bismuth alloy  
C49345  
copper-zinc-tin-bismuth, low leaded  
C49350  
copper-zinc-tin-bismuth alloy  
C49355  
bismuth brass  
C61900  
aluminum bronze  
C62300  
aluminum bronze, 9 %  
C63000  
aluminum-nickel bronze  
C63200  
aluminum-nickel bronze  
C64200  
aluminum-silicon bronze  
C64210  
aluminum-silicon bronze, 6.7 %  
C65500  
high-silicon bronze (A)  
C67500  
manganese bronze (A)  
C67600  
. . .    
C69300  
copper-zinc-silicon    
C70620  
copper-nickel 90-10  
C71520  
copper-nickel 70-30  
C77400  
nickel silver, 45-10  
C87700  
silicon bronze  
C87710  
silicon bronze  
1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
Note 1: Nominal composition and relative forgeability ratings are given in Appendix X1. Copper-nickel alloys C70620 and C71520 are intended for welded applications with seawater exposure.
Note 2: Guidelines for design and development of forgings are included in Appendix X2.
Note 3: Wrought product intended for hot forging is described in Specification B124/B124M.  
1.3 The following safety caveat pertains only to Section 10 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
30-Sep-2016
Current Stage
Ref Project

Relations

Buy Standard

Technical specification
ASTM B283/B283M-16a - Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
English language
14 pages
sale 15% off
Preview
sale 15% off
Preview
Technical specification
REDLINE ASTM B283/B283M-16a - Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
English language
14 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:B283/B283M −16a
Standard Specification for
1
Copper and Copper-Alloy Die Forgings (Hot-Pressed)
This standard is issued under the fixed designation B283/B283M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope* 1.2 Units—The values stated in either SI units or inch-
pound units are to be regarded separately as standard. The
1.1 This specification establishes the requirements for cop-
values stated in each system may not be exact equivalents;
per and copper alloy die forgings produced by the hot pressing
therefore,eachsystemshallbeusedindependentlyoftheother.
method. The following copper and copper alloys are included:
Combining values from the two systems may result in non-
conformance with the standard.
Copper or Copper Alloy
NOTE 1—Nominal composition and relative forgeability ratings are
UNS No. Name
C11000 copper
given in Appendix X1. Copper-nickel alloys C70620 and C71520 are
C14500 copper-tellurium
intended for welded applications with seawater exposure.
C14700 copper-sulfur
NOTE 2—Guidelines for design and development of forgings are
C27450 plumbing brass
included in Appendix X2.
C27451 plumbing brass
C27453 copper zinc alloy NOTE 3—Wrought product intended for hot forging is described in
C35330 leaded brass
Specification B124/B124M.
C36500 leaded Muntz metal
C37000 free-cutting Muntz metal 1.3 The following safety caveat pertains only to Section 10
C37700 forging brass
of this specification. This standard does not purport to address
C46400 naval brass
all of the safety concerns, if any, associated with its use. It is
C46750 tin brass
C48200 medium leaded naval brass
the responsibility of the user of this standard to establish
C48500 leaded naval brass
appropriate safety and health practices and determine the
C48600 naval brass
applicability of regulatory limitations prior to use.
C49250 copper-zinc-bismuth alloy
C49255 copper-zinc-bismuth-nickel alloy
C49260 copper-zinc-bismuth alloy
2. Referenced Documents
C49265 copper-zinc-tin-bismuth, low leaded
C49300 copper-zinc-tin-bismuth alloy
2
2.1 ASTM Standards:
C49340 copper-zinc-tin-bismuth alloy
C49345 copper-zinc-tin-bismuth, low leaded B124/B124MSpecification for Copper and Copper Alloy
C49350 copper-zinc-tin-bismuth alloy
Forging Rod, Bar, and Shapes
C49355 bismuth brass
B249/B249MSpecification for General Requirements for
C61900 aluminum bronze
Wrought Copper and Copper-Alloy Rod, Bar, Shapes and
C62300 aluminum bronze, 9 %
C63000 aluminum-nickel bronze
Forgings
C63200 aluminum-nickel bronze
B846Terminology for Copper and Copper Alloys
C64200 aluminum-silicon bronze
C64210 aluminum-silicon bronze, 6.7 % E8/E8MTest Methods for Tension Testing of Metallic Ma-
C65500 high-silicon bronze (A)
terials
C67500 manganese bronze (A)
E62Test Methods for Chemical Analysis of Copper and
C67600 . . .
3
C69300 copper-zinc-silicon
CopperAlloys(PhotometricMethods)(Withdrawn2010)
C70620 copper-nickel 90-10
E75Test Methods for Chemical Analysis of Copper-Nickel
C71520 copper-nickel 70-30
3
and Copper-Nickel-Zinc Alloys (Withdrawn 2010)
C77400 nickel silver, 45-10
C87700 silicon bronze
E478Test Methods for ChemicalAnalysis of CopperAlloys
C87710 silicon bronze
1 2
ThisspecificationisunderthejurisdictionofASTMCommitteeB05onCopper For referenced ASTM standards, visit the ASTM website, www.astm.org, or
and CopperAlloys and is the direct responsibility of Subcommittee B05.02 on Rod, contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Bar, Wire, Shapes and Forgings. Standards volume information, refer to the standard’s Document Summary page on
Current edition approved Oct. 1, 2016. Published November 2016. Originally the ASTM website.
3
approved in 1953. Last previous edition approved in 2016 as B283/B283M–16. The last approved version of this historical standard is referenced on
DOI: 10.1520/B0283_B0283M-16A. www.astm.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
B283/B283M−16a
2.2 Other Standards: 5.1.2 Copper or Copper Alloy UNS No. designation
4
ASMEBoiler and Pressure Vessel Code (Scope),
ISO 7602 Determination of Tellurium Content (High 5.1.3 Drawing showing the shape dimensions and toler-
Content)—Flame Atomic Absorption Spectrometric ances (Dimensions and Permissible Variations),
5
Method 5.1.4 Temper (as specified herein),
JIS H 1068:2005Me
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: B283/B283M − 16 B283/B283M − 16a
Standard Specification for
1
Copper and Copper-Alloy Die Forgings (Hot-Pressed)
This standard is issued under the fixed designation B283/B283M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope*
1.1 This specification establishes the requirements for copper and copper alloy die forgings produced by the hot pressing
method. The following copper and copper alloys are included:
Copper or Copper Alloy
UNS No. Name
C11000 copper
C14500 copper-tellurium
C14700 copper-sulfur
C27450 plumbing brass
C27451 plumbing brass
C27453 copper zinc alloy
C35330 leaded brass
C36500 leaded Muntz metal
C37000 free-cutting Muntz metal
C37700 forging brass
C46400 naval brass
C46750 tin brass
C48200 medium leaded naval brass
C48500 leaded naval brass
C48600 naval brass
C49250 copper-zinc-bismuth alloy
C49255 copper-zinc-bismuth-nickel alloy
C49260 copper-zinc-bismuth alloy
C49265 copper-zinc-tin-bismuth, low leaded
C49300 copper-zinc-tin-bismuth alloy
C49340 copper-zinc-tin-bismuth alloy
C49345 copper-zinc-tin-bismuth, low leaded
C49350 copper-zinc-tin-bismuth alloy
C49355 bismuth brass
C61900 aluminum bronze
C62300 aluminum bronze, 9 %
C63000 aluminum-nickel bronze
C63200 aluminum-nickel bronze
C64200 aluminum-silicon bronze
C64210 aluminum-silicon bronze, 6.7 %
C65500 high-silicon bronze (A)
C67500 manganese bronze (A)
C67600 . . .
C69300 copper-zinc-silicon
C70620 copper-nickel 90-10
C71520 copper-nickel 70-30
C77400 nickel silver, 45-10
C87700 silicon bronze
C87710 silicon bronze
1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated
in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values
from the two systems may result in non-conformance with the standard.
1
This specification is under the jurisdiction of ASTM Committee B05 on Copper and Copper Alloys and is the direct responsibility of Subcommittee B05.02 on Rod, Bar,
Wire, Shapes and Forgings.
Current edition approved April 1, 2016Oct. 1, 2016. Published June 2016November 2016. Originally approved in 1953. Last previous edition approved in 20142016 as
B283/B283M – 14a.B283/B283M–16. DOI: 10.1520/B0283_B0283M-16.10.1520/B0283_B0283M-16A.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
B283/B283M − 16a
NOTE 1—Nominal composition and relative forgeability ratings are given in Appendix X1. Copper-nickel alloys C70620 and C71520 are intended for
welded applications with seawater exposure.
NOTE 2—Guidelines for design and development of forgings are included in Appendix X2.
NOTE 3—Wrought product intended for hot forging is described in Specification B124/B124M.
1.3 The following safety caveat pertains only to Section 10 of this specification. This standard does not purport to address all
of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate
safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents
2
2.1 ASTM Standards:
B124/B124M Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B249/B249M Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B846 Terminology for Copper and Copper Alloys
E8/E8M Test Methods for Tension Testing of Metallic Materials
3
E62 Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods) (Withdrawn 2010)
3
E75 Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys (Withdrawn 2010)
E478 Test Methods for Chemical Analysis of Copper Alloys
2.2 Other Standards:
4
ASME Boiler and Pressure Vessel Code
5
ISO 7602 Determination of Tellurium Content (High Content)—Flame Atomic Absorption Spectrometric Method
6
JIS H 1068:2005 Method for Determination of Bismuth in Copper and Copper Alloys (Japanese Industrial Standards)
7
2.3 Military Standards:
MIL-ST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.