ASTM D5612-94(2018)
(Guide)Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
SIGNIFICANCE AND USE
5.1 Environmental data are often required for making regulatory and programmatic decisions. These data must be of known quality commensurate with their intended use.
5.2 Certain minimal criteria must be met by the field organizations in order to meet the objectives of the water monitoring activities.
5.3 This guide defines the criteria for organizations taking water samples and generating environmental data and identifies other activities that may be required based on the DQOs.
5.4 This guide emphasizes the importance of communication among those involved in establishing the DQOs, planning, and implementing the sampling and analysis aspects of environmental data generation activities, and assessing data quality.
SCOPE
1.1 This guide covers planning and implementation of the sampling aspects of environmental data generation activities. Environmental data generation efforts are comprised of four parts: (1) establishment of data quality objectives (DQOs); (2) design of field sampling and measurement strategies and specification of laboratory analyses and data acceptance criteria; (3) implementation of sampling and analysis strategies; and (4) data quality assessment.
1.2 This guide defines the criteria that must be considered to ensure the quality of the field aspects of environmental data and sample generation activities.
1.3 DQOs should be adopted prior to the application of this guide. The data generated in accordance with this guide are subject to a final assessment to determine whether the DQOs were met. For example, many screening activities do not require all of the quality assurance (QA) and quality control (QC) steps found in this guide to generate data adequate to meet the project needs. The extent to which all of the requirements must be met remains a matter of technical judgement as it relates to the established DQOs.
1.4 This guide presents extensive management requirements designed to ensure high-quality samples and data. The words “must,” “shall,” “may,” and “should” have been selected carefully to reflect the importance placed on many of the statements made in this guide.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: D5612 − 94 (Reapproved 2018)
Standard Guide for
Quality Planning and Field Implementation of a Water
Quality Measurement Program
This standard is issued under the fixed designation D5612; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope mendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committee.
1.1 This guide covers planning and implementation of the
sampling aspects of environmental data generation activities.
2. Referenced Documents
Environmental data generation efforts are comprised of four
2.1 ASTM Standards:
parts: (1) establishment of data quality objectives (DQOs); (2)
D596 Guide for Reporting Results of Analysis of Water
design of field sampling and measurement strategies and
D1129 Terminology Relating to Water
specification of laboratory analyses and data acceptance crite-
D2777 Practice for Determination of Precision and Bias of
ria;(3)implementationofsamplingandanalysisstrategies;and
Applicable Test Methods of Committee D19 on Water
(4) data quality assessment.
D3370 Practices for Sampling Water from Closed Conduits
1.2 This guide defines the criteria that must be considered to
D3856 Guide for Management Systems in Laboratories
ensure the quality of the field aspects of environmental data
Engaged in Analysis of Water
and sample generation activities.
D4210 Practice for Intralaboratory Quality Control Proce-
1.3 DQOs should be adopted prior to the application of this
dures and a Discussion on Reporting Low-Level Data
guide. The data generated in accordance with this guide are
(Withdrawn 2002)
subject to a final assessment to determine whether the DQOs
D4447 Guide for Disposal of Laboratory Chemicals and
were met. For example, many screening activities do not
Samples
require all of the quality assurance (QA) and quality control
D4448 Guide for Sampling Ground-Water Monitoring Wells
(QC) steps found in this guide to generate data adequate to
D4840 Guide for Sample Chain-of-Custody Procedures
meet the project needs. The extent to which all of the
D4841 Practice for Estimation of Holding Time for Water
requirements must be met remains a matter of technical
Samples Containing Organic and Inorganic Constituents
judgement as it relates to the established DQOs.
D5172 Guide for Documenting the Standard Operating Pro-
cedures Used for the Analysis of Water
1.4 Thisguidepresentsextensivemanagementrequirements
D5283 Practice for Generation of Environmental Data Re-
designed to ensure high-quality samples and data. The words
lated to Waste Management Activities: Quality Assurance
“must,” “shall,” “may,” and “should” have been selected
and Quality Control Planning and Implementation
carefully to reflect the importance placed on many of the
E29 Practice for Using Significant Digits in Test Data to
statements made in this guide.
Determine Conformance with Specifications
1.5 This standard does not purport to address all of the
E178 Practice for Dealing With Outlying Observations
safety concerns, if any, associated with its use. It is the
E1187 Terminology Relating to Conformity Assessment
responsibility of the user of this standard to establish appro-
(Withdrawn 2006)
priate safety, health, and environmental practices and deter-
2.2 U.S. Environmental Protection Agency Documents:
mine the applicability of regulatory limitations prior to use.
QAMS-004/80 Guidelines and Specifications for Preparing
1.6 This international standard was developed in accor-
Quality Assurance Program Plans, Office of Monitoring
dance with internationally recognized principles on standard-
ization established in the Decision on Principles for the
Development of International Standards, Guides and Recom-
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
This guide is under the jurisdiction of ASTM Committee D19 on Water and is Standards volume information, refer to the standard’s Document Summary page on
thedirectresponsibilityofSubcommitteeD19.02onQualitySystems,Specification, the ASTM website.
and Statistics. Technical Resources, and Statistical Methods. The last approved version of this historical standard is referenced on
Current edition approved Oct. 15, 2018. Published November 2018. Originally www.astm.org.
approved in 1994. Last previous edition approved in 2013 as D5612 – 94 (2013). Available from DLA Document Services, Building 4/D, 700 Robbins Ave.,
DOI: 10.1520/D5612-94R18. Philadelphia, PA 19111-5094, http://quicksearch.dla.mil.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
D5612 − 94 (2018)
SystemsandQualityAssurance,Sept.20,1980(NTISNo. 5.3 This guide defines the criteria for organizations taking
PB83219667/LL) watersamplesandgeneratingenvironmentaldataandidentifies
QAMS-005/80 IntermGuidelinesandSpecificationsforPre- other activities that may be required based on the DQOs.
paring Quality Assurance Project Plans, Office of Moni-
5.4 This guide emphasizes the importance of communica-
toring Systems and Quality Assurance, Dec. 29, 1980
tion among those involved in establishing the DQOs, planning,
(NTIS No. PB83170514/LL)
and implementing the sampling and analysis aspects of envi-
QAMS-500/80 Development of Data Quality Objectives,
ronmentaldatagenerationactivities,andassessingdataquality.
Description of Stages I and II, July 16, 1986
6. Project Specification
3. Terminology
6.1 Overall Project Objectives—The overall objectives of
3.1 Definitions:
the project must be defined prior to the start of any field and
3.1.1 For definitions of terms used in this standard, refer to
laboratory activities.
Terminologies D1129 and E1187.
6.2 Data Quality Objectives—DQOs for the data generation
3.2 Definitions of Terms Specific to This Standard:
activity should be defined prior to the initiation of field and
3.2.1 background sample, n—a sample taken from a loca- laboratory work, and they must be compatible with project
tion on or proximate to the site of interest.This sample is taken
objectives. It is desirable that the field and laboratory organi-
to document baseline or historical information.
zations be aware of the DQOs so that the personnel conducting
theworkareabletomakeinformeddecisionsduringthecourse
3.2.2 collocated samples, n—independent samples collected
of the project.
as close as possible to the same point in space and time and
intended to be identical.
6.3 Project Plan—The project plan should be designed to
meet the project objectives and DQOs.The project plan should
3.2.3 data quality objectives (DQOs), n—statements on the
define the following:
level of uncertainty that a decision maker is willing to accept
6.3.1 Specific Project Objectives—The objectives of the
in the results derived from environmental data (see QAMS-
field and laboratory work must be defined clearly, define
500/80).
specific objectives for the sampling location, and describe the
3.2.4 material blank, n—asamplecomposedofconstruction
intendedusesforthedata.Theprojectobjectivemayneedtobe
materials such as those used in well installation. Well
reviewed as information is gathered. Any changes in the
development, pump and flow testing, and slurry wall construc-
project objective affecting field and laboratory activities should
tion. Examples of these materials are bentonite, sand, drilling
be communicated to the field and laboratory personnel.
fluids, and source and purge water. This blank documents the
6.3.2 Background Information—Any background informa-
contamination resulting from usage of the construction mate-
tion that could affect meeting the project objective or DQOs
rials.
should be provided. For example, the identification of any
3.2.5 quality assurance program plan (QAPP), n—an or-
regulatoryprogramsgoverningdatacollectionandanalysisand
derly assemblage of management policies, objectives,
thereasonforconductingthesamplecollectionworkshouldbe
principles, and general procedures by which an organization
included in the background information.
involved in environmental data generation activities outlines
6.3.3 Project management shall have individuals designated
how it intends to produce data of known quality.
as having responsibility and authority for the following: (1)
developing project documents that implement the DQOs; (2)
3.2.6 qualityassuranceprojectplan(QAPjP),n—anorderly
selecting field and laboratory organizations to conduct the
assemblage of detailed procedures designed to produce data of
work; (3) coordinating communication among the field and
sufficient quality to meet the DQOs for a specific data
laboratoryorganizationsandgovernmentagencies,asrequired;
collection activity.
and (4) reviewing and assessing the final data.
6.3.4 Sampling requirements shall be specified, including
4. Summary of Guide
sampling locations, equipment and procedures, and sample
4.1 This guide describes the criteria and activities for
preservation and handling.
organizations involved in obtaining water samples and gener-
6.3.5 Analytical requirements shall be specified, including
ating field data in terms of human and physical resources and
theanalyticalprocedures,analytelist,requireddetectionlimits,
QC procedures and documentation requirements depending on
and required precision and bias values. Regulatory require-
the DQOs or agreed upon project plan.
ments and DQOs shall be considered when developing the
specifications.
5. Significance and Use
NOTE 1—The above does not imply that the specified analytical
5.1 Environmental data are often required for making regu-
requirements can be met.
latory and programmatic decisions. These data must be of
6.3.6 The QAand QC requirements shall address both field
known quality commensurate with their intended use.
and laboratory activities. The means for controlling false
5.2 Certain minimal criteria must be met by the field positives and false negatives shall be specified.
organizations in order to meet the objectives of the water 6.3.6.1 The types and frequency of field QC samples to be
monitoring activities. collected, including field blanks, duplicates, and spikes, trip
D5612 − 94 (2018)
blanks, equipment rinsates, background samples, reference rate from and independent of personnel engaged in the work
materials, material blanks, and split samples, should be speci- being monitored. The QAfunction shall be responsible for the
fied. Control parameters for field activities shall be described QA review in accordance with 7.7.
(see 7.6.3). 7.2.3 Personnel—It is the responsibility of the organization
6.3.6.2 The types and frequency of laboratory QC samples,
to establish personnel qualifications and training requirements
such as laboratory control samples, laboratory blanks, matrix for all positions. Each member of the organization shall
spikes, matrix duplicates, and matrix spike duplicates, shall be
possess the education, training, technical knowledge, and
specified. Any specific performance criteria shall be specified. experience, or a combination thereof, to enable that individual
Data validation criteria shall be defined.
to perform his or her assigned functions. Personnel qualifica-
tions shall be documented in terms of education, experience,
6.4 Project Documentation—All documents required for
and training. Training shall be provided for all staff members,
planning, implementing, and evaluating the data collection
as necessary, so that they can perform their functions properly.
effort shall be specified. These may include, although are not
7.2.4 Subcontractors—The use of subcontractors shall not
limited to, a statement of work, technical and cost proposals,
jeopardize data quality. The field organization is therefore
work plan, sampling and analysis plan, QAPjP, health and
responsible for ensuring that its subcontractors are in compli-
safety plan, community relations plan, documents required by
ance with the requirements of this section as is appropriate to
regulatory agencies, requirements for raw field and analytical
the specific task(s) they are performing.
records,technicalreportsassessingtheenvironmentaldata,and
records retention policy. Planning documents shall specify the
7.3 Field Logistics:
required level of document control and identify the personnel
7.3.1 General—Sampling site facilities shall be examined
having access. Document formats that may be required to
prior to the start of work in order to ensure that all required
ensure that all data needs are satisfied shall be specified. In
itemsareavailable.Theactualsamplingareashallbeexamined
addition, a project schedule that identifies critical milestones
to ensure that trucks, drilling equipment, and personnel have
and completion dates should be available.
access to the site. Security, health and safety, and protection of
theenvironmentshallbecontrolledatthesitesupportareasand
7. Standard Guide for Environmental Field Operations
sampling site.
7.1 Purposes—The field organization must conduct its op-
7.3.2 Field Measurements—Project planning documents
erations in such a manner as to provide reliable information
shall both address the type of field measurements to be
that meets the DQOs. To achieve this goal, certain minimum
performed and plan for the appropriate area to perform the
policies and procedures must be implemented in order to meet
work. Planning documents shall address ventilation, protection
the DQOs.
from extreme weather and temperatures, access to stable
power, and provisions for water and gases of required purity.
7.2 Organization—Thefieldorganizationshallbestructured
Plans shall be made to identify and supply applicable safety
such that each member of the organization has a clear under-
equipment, as specified in the project health and safety plan.
standing of his or her duties and responsibilities and the
7.3.3 Sample Handling, Shipping, and Storage Area—The
relationship of those responsibilities to the total effort. The
determination of whether sample shipping is necessary shall be
organizational structure, functional responsibilities, levels of
made during project planning. This need is established by
authority, job descriptions, and lines of communication for
evaluating the analyses required, holding times (see Practice
activities shall be established and documented. One person
D4841), and location of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.