Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range

SCOPE
1.1 This specification covers a group of common requirements that shall apply to carbon, alloy and stainless steel fasteners or fastener materials, or both, under any of the following ASTM Specifications (or under any other ASTM Specifications that invoke this specification or portions thereof):
Title of SpecificationsASTM DesignationAlloy-Steel and Stainless Steel Bolting Materials for High-Temperature ServiceA 193/A 193MCarbon and Alloy Steel Nuts for Bolts for High Pressure and High-Temperature ServiceA 194/A 194MAlloy Steel Bolting Materials for Low-Temperature ServiceA 320/A 320MAlloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature ServiceA 437/A 437MHigh-Temperature Bolting Materials With Expansion Coefficients Comparable to Austenitic Stainless SteelsA 453/A 453MAlloy-Steel Bolting Materials for Special ApplicationsA 540/A 540M
1.2 In case of conflict the requirements of the individual product specification shall prevail over those of this specification.
1.3 Additional requirements may be specified by mutual agreement between the purchaser and supplier.
1.4 Values stated in either inch-pound or SI units (metric) are to be regarded separately. The SI units are shown in brackets within the text and tables. The values stated in each system are not exact equivalents, therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. Inch-pound units shall apply unless the "M" designation of the product specification is specified in the order.

General Information

Status
Historical
Publication Date
09-May-2003
Current Stage
Ref Project

Relations

Buy Standard

Technical specification
ASTM A962/A962M-03 - Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: A 962/A 962M – 03
Standard Specification for
Common Requirements for Steel Fasteners or Fastener
Materials, or Both, Intended for Use at Any Temperature
1
from Cryogenic to the Creep Range
This standard is issued under the fixed designation A 962/A 962M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope* 2. Referenced Documents
1.1 This specification covers a group of common require- The following documents shall form a part of this specifi-
ments that shall apply to carbon, alloy and stainless steel cation to the extent specified. The latest issue shall apply unless
fasteners or fastener materials, or both, under any of the otherwise specified.
following ASTM Specifications (or under any other ASTM 2.1 ASTM Standards:
Specifications that invoke this specification or portions A 29/A 29M Specification for Steel Bars, Carbon and
thereof): Alloy, Hot-Wrought and Cold-Finished, General Require-
2
ments for
Title of Specifications ASTM Designation
Alloy-Steel and Stainless Steel Bolting Materials A 193/A 193M
A 193/A 193M Specification for Alloy-Steel and Stainless
for High-Temperature Service
3
Steel Bolting Materials for High-Temperature Service
Carbon and Alloy Steel Nuts for Bolts for High A 194/A 194M
Pressure and High-Temperature Service A 194/A 194M Specification for Carbon and Alloy Steel
Alloy Steel Bolting Materials for Low-Temperature A 320/A 320M
Nuts for Bolts for High-Pressure and High-Temperature
Service
3
Service
Alloy-Steel Turbine-Type Bolting Material A 437/A 437M
Specially Heat Treated for High-Temperature A 320/A 320M Specification for Alloy Steel Bolting Ma-
3
Service
terials for Low-Temperature Service
High-Temperature Bolting Materials With Expansion A 453/A 453M
A 370 Test Methods and Definitions for Mechanical Testing
Coefficients Comparable to Austenitic Stainless
3
Steels
of Steel Products
Alloy-Steel Bolting Materials for Special Applications A 540/A 540M
A 437/A 437M Specification for Alloy-Steel Turbine-Type
Bolting Material Specially Heat Treated for High-
1.2 In case of conflict the requirements of the individual
3
Temperature Service
product specification shall prevail over those of this specifica-
A 453/A 453M Specification for High-Temperature Bolt-
tion.
ing Materials, With Expansion Coefficients Comparable to
1.3 Additional requirements may be specified by mutual
3
Austenitic Stainless Steels
agreement between the purchaser and supplier.
A 484/A 484M Specification for General Requirements for
1.4 Values stated in either inch-pound or SI units (metric)
4
Stainless Steel Bars, Billets, and Forgings
are to be regarded separately. The SI units are shown in
A 540/A 540M Specification for Alloy-Steel Bolting Ma-
brackets within the text and tables. The values stated in each
3
terials for Special Applications
system are not exact equivalents, therefore, each system shall
A 574 Specification for Alloy Steel Socket-Head Cap
be used independently of the other. Combining values from the
5
Screws
two systems may result in nonconformance with the specifi-
A 700 Practices for Packaging, Marking, and Loading
cation. Inch-pound units shall apply unless the “M” designa-
2
Methods for Steel Products for Domestic Shipment
tion of the product specification is specified in the order.
A 751 Test Methods, Practices, and Terminology for
3
Chemical Analysis of Steel Products
1
This specification is under the jurisdiction of ASTM Committee A01 on Steel,
Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee
2
A01.22 on Steel Forgings and Wrought Fittings for Piping Applications and Bolting Annual Book of ASTM Standards, Vol 01.05.
3
Materials for Piping and Special Purpose Applications. Annual Book of ASTM Standards, Vol 01.01.
4
Current edition approved May 10, 2003. Published July 2003. Originally Annual Book of ASTM Standards, Vol 01.03.
5
approved in 1997. Last previous edition approved in 2001 as A 962/A 962M-01a. Annual Book of ASTM Standards, Vol 01.08.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
A 962/A 962M – 03
A 788 Specification for Steel Forgings, General Require- 3.1.7 length, fasteners subject to full size testing—that
2
ments portion of the fastener whose body diameter is approximately
6
E 3 Practice for Preparation of Metallographic Specimens
the same as the nominal thread size.
E 381 Method of Macroetch Testing Steel Bars, Billets,
3.1.8 lot—unless otherwis
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.