ASTM F468-01

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use

SCOPE
1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications.
1.2 Applicable nuts for use with bolts, cap screws, and studs covered by this specification are covered by Specification F 467.
Note 1—A complete metric companion to Specification F 468 has been developed-F 468M; therefore no metric equivalents are presented in this specification.

General Information

• Status: Historical
• Publication Date: 09-Oct-2001
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: F16 - Fasteners
• Drafting Committee: F16.04 - Nonferrous Fasteners

Relations

• Replaces: ASTM F468-98 - Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
• Effective Date: 10-Oct-2001
• Replaced By: ASTM F468-01e1 - Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
• Effective Date: 10-Oct-2001
• Referred By: ASTM F1718-01(2019) - Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
• Effective Date: 10-Oct-2001
• Referred By: ASTM F467-13(2018) - Standard Specification for Nonferrous Nuts for General Use
• Effective Date: 10-Oct-2001
• Referred By: ASTM C1802-23 - Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
• Effective Date: 10-Oct-2001
• Referred By: ASTM B745/B745M-15(2021) - Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
• Effective Date: 10-Oct-2001
• Referred By: ASTM F1155-10(2019) - Standard Practice for Selection and Application of Piping System Materials
• Effective Date: 10-Oct-2001
• Referred By: ASTM B746/B746M-22 - Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
• Effective Date: 10-Oct-2001
• Referred By: ASTM F998-12(2022) - Standard Specification for Centrifugal Pump, Shipboard Use
• Effective Date: 10-Oct-2001
• Referred By: ASTM F1508-96(2021) - Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
• Effective Date: 10-Oct-2001
• Referred By: ASTM F1370-92(2019)e1 - Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
• Effective Date: 10-Oct-2001

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: F 468 – 01
Standard Specification for
Nonferrous Bolts, Hex Cap Screws, and Studs for General
1
Use
This standard is issued under the fixed designation F 468; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope E 38 Methods for Chemical Analysis of Nickel-Chromium
9
and Nickel-Chromium-Iron Alloys
1.1 This specification covers the requirements for commer-
8
E 53 Test Methods for Chemical Analysis of Copper
cial wrought nonferrous bolts, hex cap screws, and studs 0.250
E 54 Test Methods for Chemical Analysis of Special
to 1.500 in. inclusive in diameter manufactured from a number
8
Brasses and Bronzes
of alloys in common use and intended for general service
E 55 Practice for Sampling Wrought Nonferrous Metals and
applications.
8
Alloys for Determination of Chemical Composition
1.2 Applicable nuts for use with bolts, cap screws, and studs
E 62 Test Methods for Chemical Analysis of Copper and
covered by this specification are covered by Specification
8
Copper Alloys (Photometric Methods)
F 467.
E 75 Test Methods for Chemical Analysis of Copper-Nickel
NOTE 1—A complete metric companion to Specification F 468 has been 8
and Copper-Nickel-Zinc Alloys
developed—F 468M; therefore no metric equivalents are presented in this
E 76 Test Methods for Chemical Analysis of Nickel-Copper
specification.
8
Alloys
E 92 Test Method for Vickers Hardness of Metallic Mate-
2. Referenced Documents
6
rials
2.1 ASTM Standards:
E 101 Test Method for Spectrographic Analysis of Alumi-
B 154 Test Method for Mercurous Nitrate Test for Copper
num and Aluminum Alloys by the Point-to-Plane Tech-
2
and Copper Alloys
10
nique
B 193 Test Method for Resistivity of Electrical Conductor
3 E 120 Test Methods for Chemical Analysis of Titanium and
Materials
8
Titanium Alloys
B 211 Specification for Aluminum and Aluminum-Alloy
11
4 E 165 Test Method for Liquid Penetrant Examination
Bar, Rod, and Wire
E 227 Test Method for Optical Emission Spectrometric
B 565 Test Method for Shear Testing of Aluminum and
Analysis of Aluminum and Aluminum Alloys by the
Aluminum-Alloy Rivets and Cold-Heading Wire and
8
4 Point-to-Plane Technique
Rods
5 E 354 Test Methods for Chemical Analysis of High-
D 3951 Practice for Commercial Packaging
6 Temperature, Electrical, Magnetic, and Other Similar Iron,
E 8 Test Methods of Tension Testing of Metallic Materials
8
Nickel, and Cobalt Alloys
E 18 Test Methods for Rockwell Hardness and Rockwell
E 478 Test Methods for Chemical Analysis of Copper
6
Superficial Hardness of Metallic Materials
8
Alloys
E 29 Practice for Using Significant Digits in Test Data to
E 1409 Test Method for Determination of Oxygen in Tita-
7
Determine Conformance with Specifications
nium and Titanium Alloys by the Inert Gas Fusion Tech-
E 34 Test Methods for Chemical Analysis of Aluminum and
8
nique
8
Aluminum Base Alloys
12
F 467 Specification for Nonferrous Nuts for General Use
F 606 Test Methods for Determining the Mechanical Prop-
1
This specification is under the jurisdiction of ASTM Committee F16 on
erties of Externally and Internally Threaded Fasteners,
Fasteners and is the direct responsibility of Subcommittee F16.04 on Nonferrous
12
Washers, and Rivets
Fasteners.
Current edition approved Apr. 10, 2001. Published June 2001. Originally F 1470 Guide for Fastener Sampling for Specified Mechani-
12
published as F 468 – 76 T. Last previous edition F 468 – 98.
cal Properties and Performance Inspection
2
Annual Book of ASTM Standards, Vol 02.01.
3
Annual Book of ASTM Standards, Vol 02.03.
4
Annual Book of ASTM Standards, Vol 02.02.
5 9
Annual Book of ASTM Standards, Vol 15.09. Discontinued 1989; Replaced by E 350.
6 10
Annual Book of ASTM Standards, Vol 03.01. Discontinued; see 1995 Annual Book of ASTM Standards, Vol 03.05.
7 11
Annual Book of ASTM Standards, Vol 14.02. Annual Book of ASTM Standards, Vol 03.03.
8 12
Annual Book of ASTM Standards, Vol 03.05. Annual Book of ASTM Standards, Vol 01.08.
Copyright © ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
F 468
2.2 American National Standards: 4.2 Manufacture:
ANSI B1.1 Unified Inch Screw Threads (UN and UNR
4.2.1 FormingUnless otherwise specified, the fasteners shall
13
Thread Form) be cold formed, hot formed, or machined from suitable
ANSI B18.2.1 Square and Hex Bolts and Screws, Including
material, at the option of the manufacturer.
13
Hex Cap Screws 4.2.2 Condition—Except as provided in 4.2.3, the fasteners
ANSI H35
...