ASTM B139/B139M-01

Standard Specification for Phosphor Bronze Rod, Bar, and Shapes

SCOPE
1.1 This specification establishes the requirements for phosphor bronze rod, bar, and shapes.
1.2 Units--The values stated in inch-pound units or SI units are to be regarded separately in the standard. Within the text, the SI values are given in brackets. The values stated in each system are not exact equivalents; each system of units is independent of the other. Combining values from the two systems may result in nonconformance with the specification.

General Information

• Status: Historical
• Publication Date: 09-Apr-2001
• ICS: 77.150.30 - Copper products
• Technical Committee: B05 - Copper and Copper Alloys
• Drafting Committee: B05.02 - Rod, Bar, Wire, Shapes and Forgings

Relations

• Replaced By: ASTM B139/B139M-06 - Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
• Effective Date: 01-Feb-2006
• Referred By: ASTM B249/B249M-22 - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
• Effective Date: 10-Apr-2001
• Referred By: ASTM D897-08(2016) - Standard Test Method for Tensile Properties of Adhesive Bonds
• Effective Date: 10-Apr-2001
• Referred By: ASTM B159/B159M-17 - Standard Specification for Phosphor Bronze Wire
• Effective Date: 10-Apr-2001
• Referred By: ASTM E1647-16(2022) - Standard Practice for Determining Contrast Sensitivity in Radiology
• Effective Date: 10-Apr-2001
• Referred By: ASTM D1062-08(2023) - Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
• Effective Date: 10-Apr-2001
• Referred By: ASTM E1025-18 - Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography
• Effective Date: 10-Apr-2001
• Referred By: ASTM E747-18 - Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
• Effective Date: 10-Apr-2001
• Referred By: ASTM E784-89(2022) - Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
• Effective Date: 10-Apr-2001
• Referred By: ASTM D950-03(2020)e1 - Standard Test Method for Impact Strength of Adhesive Bonds
• Effective Date: 10-Apr-2001

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: B 139/B 139M – 01
Standard Specification for
1
Phosphor Bronze Rod, Bar, and Shapes
This standard is issued under the fixed designation B 139/B 139M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope* 3.1.8 Significance of Numerical Limits.
3.1.9 Inspection.
1.1 This specification establishes the requirements for phos-
3.1.10 Rejection and Rehearing.
phor bronze rod, bar, and shapes.
3.1.11 Certification.
1.2 Units—The values stated in inch-pound units or SI units
3.1.12 Mill Test Report.
are to be regarded separately in the standard. Within the text,
3.1.13 Packaging and Package Marking.
the SI values are given in brackets. The values stated in each
3.2 In addition, when a section with a title identical to that
system are not exact equivalents; each system of units is
referencedin3.1aboveappearsinthisspecification,itcontains
independent of the other. Combining values from the two
additional information which supplements that appearing in
systems may result in nonconformance with the specification.
Specification B 249/B 249M. In case of conflict, this specifi-
2. Referenced Documents
cation shall prevail.
2.1 ASTM Standards:
4. Ordering Information
B 249/B 249M Specification for General Requirements for
4.1 Include the following when ordering:
Wrought Copper and Copper-Alloy Rod, Bar, Shapes, and
2
4.1.1 ASTM designation and year of issue,
Forgings
3
4.1.2 Copper Alloy UNS No. designation (for example,
E 8 Test Methods forTensionTesting of Metallic Materials
C51000),
E 8M Test Methods for Tension Testing of Metallic Mate-
3
4.1.3 Product temper (for example, H04),
rials (Metric)
4.1.4 Form of product (rod, bar or shape),
E 62 Test Methods for Chemical Analysis of Copper and
4
4.1.5 Dimensions and permissible variations,
Copper Alloys (Photometric Methods)
4.1.6 Edge Contours,
E 478 Test Methods for Chemical Analysis of Copper
5 4.1.7 Quantity:totalweighteachcopperalloy,temper,form,
Alloys
and size, and
3. General Requirements 4.1.8 When product is purchased for an agency of the U.S.
government.
3.1 The following sections of Specification B 249/B 249M
4.2 The following options are available under this specifi-
constitute a part of this specification.
cation and shall be included in the contract or purchase order
3.1.1 Terminology.
when required.
3.1.2 Materials and Manufacture.
4.2.1 Piston finish for rod and shafting,
3.1.3 Workmanship, Finish and Appearance.
4.2.2 Certification (Specification B 249/B 249M), and
3.1.4 Sampling.
4.2.3 Mill test report (Specification B 249/B 249M).
3.1.5 Number of Tests and Retests.
3.1.6 Specimen Preparation.
5. Material and Manufacture
3.1.7 Test Methods.
5.1 Material:
5.1.1 The material of manufacture shall be cast rod, bar, or
1
ThisspecificationisunderthejurisdictionofASTMCommitteeB05onCopper
billets of Copper Alloy UNS No. C51000, C52100, C52400,
andCopperAlloysandisthedirectresponsibilityofSubcommitteeB05.02onRods,
C53400, or C54400 as specified in the ordering information
Bars, Wires, Shapes, and Forgings.
and of such soundness as to be suitable for processing in to the
Current edition approved April 10, 2001. Published August 2001. Originally
products prescribed herein.
published as B 139 – 41T. Last previous edition B 139 – 95.
2
Annual Book of ASTM Standards, Vol 02.01.
3 NOTE 1—Copper Alloy UNS Nos. C51000, C52100, and C52400 are
Annual Book of ASTM Standards, Vol 03.01.
4
suitable for structural applications, pump parts, rods, bolts, gears, and
Annual Book of ASTM Standards, Vol 03.05.
5
similar applications.
Annual Book of ASTM Standards, Vol 03.06.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
B 139/B 139M – 01
NOTE 2—Copper Alloys UNS Nos. C53400 and C54400 are free
10. Purchases for U.S. Government
machining and are suitable for screw-machine products.
10.1 When specified in the contract or purchase order,
5.2 Manufacture:
product purchased for agencies of the U.S. government shall
5.2.1 The product shall be manufactured by such hot-
conform to the additional requirements prescribed in the
working, cold-working, and annealing processes as to produce
Supplementary Requirements section of Specification B 249/
a uniform wrought structure in the finished product.
B 249M.
5.2.2 Theproductshallbehotorcoldworkedtothefinished
11. Dimensions, Mass, and Permissible Variations
size and sub
...