iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM C676-04(2014)

(Test Method)

Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware

Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware

SIGNIFICANCE AND USE
4.1 This test method provides a means of estimating the qualitative performance of glass enamel decorations that are exposed to high phosphate detergents during use. This test method also attempts to simulate accelerated exposure to high phosphate detergents prior to testing for heavy metal release, such as in Test Method C927 when long term performance of enamels must be evaluated.
SCOPE
1.1 This qualitative test method is designed to provide a convenient and reproducible method of determining the detergent resistance of decorations applied to glass tableware.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
30-Apr-2014
ICS
97.040.60 - Cookware, cutlery and flatware
Technical Committee
C14 - Glass and Glass Products
Drafting Committee
C14.10 - Glass Decoration
Current Stage
Ref Project

Relations

Replaces
ASTM C676-04(2009) - Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
Effective Date
01-May-2014
Replaced By
ASTM C676-04(2019) - Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
Effective Date
01-Feb-2019

Buy Standard

ASTM C676-04(2014) - Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass TablewareASTM C676-04(2014) - Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
PreviousNext
Standard
ASTM C676-04(2014) - Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: C676 − 04 (Reapproved 2014)
Standard Test Method for
Detergent Resistance of Ceramic Decorations on Glass
Tableware
This standard is issued under the fixed designation C676; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 5.2 Specimen Holder—A device for supporting the speci-
mens to be evaluated in such a manner as to ensure free and
1.1 This qualitative test method is designed to provide a
unobstructed contact between the decoration and the test
convenient and reproducible method of determining the deter-
solution.
gent resistance of decorations applied to glass tableware.
1.2 This standard does not purport to address all of the 6. Test Specimens
safety concerns, if any, associated with its use. It is the
6.1 Test specimens consist of representative glass tableware
responsibility of the user of this standard to establish appro-
with ceramic decorations.
priate safety and health practices and determine the applica-
bility of regulatory limitations prior to use. 7. Test Solution
7.1 Prepare a test solution consisting of 5 % sodium pyro-
2. Referenced Documents
phosphate (Na P O ·10H O) and 95 % distilled water.
4 2 7 2
2.1 ASTM Standards:
C927 Test Method for Lead and Cadmium Extracted from
8. Procedure
the Lip and Rim Area of Glass Tumblers Externally
8.1 Immerse the samples for 2-h periods in the test solution
Decorated with Ceramic Glass Enamels
maintained at 60 6 2°C. Retain a duplicate piece of ware with
each decoration under test without exposure to the solution as
3. Terminology
an aid in judging the degree of chemical action on the
3.1 Definition:
specimens under test.At the end of the 2-h periods, remove the
3.2 detergent resistance—the degree of resistance to the
specimens from the solution, rub vigorously with a cloth under
chemical action of detergents.
running water, dry, and evaluate.
4. Significance and Use
8.2 Grade the decorations after each 2-h period of immer-
sion in accordance with one of the following classes:
4.1 This test method provides a means of estimating the
Class 1—No loss of gloss.
qualitative performance of glass enamel decorations that are
Class 2—Gloss loss, no loss of opacity.
exposed to high phosphate detergents during use. This test
Class 3—Noticeable loss of opacity.
method also attempts to simulate accelerated exposure to high
Class 4—Complete removal of decoration.
phosphate detergents prior to testing for heavy metal release,
such as in Test Method C927 when long term performance of
9. Interpretation of Results
enamels must be evaluated.
9.1 Grade the decorations after each 2-h period of immer-
5. Apparatus
sion in accordance with one of the following classes:
5.1 Test Chamber—Athermostatically controlled tank, pref- Grade 1—No attack apparent.
erably stainless steel, that will maintain a solution temperature
Grade 2—Appearance of iridescence or visible stain on the
of 60 6 2°C.
exposed surface w
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM C675-91(2022)(Test Method)
Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers

SIGNIFICANCE AND USE
3.1 This test method provides a means for determining the durability of decorated returnable glass beverage containers which may be a prerequisite in product specifications.
SCOPE
1.1 This test method covers determination of the alkali resistance of ceramic labels (hereafter referred to as ACL (Applied Color Label) on returnable beverage bottles (hereafter referred to as ware) to ensure the necessary durability of the label. A number of states require the cleaning and sanitizing of this ware by washing in hot alkali solutions. Accelerated tests are needed to ensure that the ACL will withstand the anticipated number of washings and still present an acceptable ware identification and appearance.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM C777-04(2019)(Test Method)
Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass

ABSTRACT
This test method covers the qualitative determination of the sulfide resistance of ceramic decorations on glass to assure the necessary durability of the decoration. The decorated ware should be representative of the lot, or run, and should be taken in accordance with the prescribed principles. The preparations of the test solution are presented in details. The procedures for testing the sulfide resistance of ceramic decorations on glass are presented. The decoration on the test specimen and reference standard are graded in accordance with one of the following visual test grades: grade V1, grade V2, grade V3, grade V4, and grade V5. If stain exists, the decoration on the test specimen and reference standard are graded in accordance with one of the following physical test grades: grade P1, grade P2, and grade P3.
SCOPE
1.1 This test method covers the qualitative determination of the sulfide resistance of ceramic decorations on glass to assure the necessary durability of the decoration.  
1.2 This test method provides an indication of performance when and if the decorations are exposed to sulfide attack.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This test method generates hydrogen sulfide gas which is highly poisonous.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM C735-04(2019)(Test Method)
Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers

SIGNIFICANCE AND USE
4.1 This test method evaluates the quality and serviceability of ceramic decorations on returnable beer and beverage containers.  
4.2 This test method is also suitable for specification acceptance. Its significance is that bottles with good acid resistance coatings have longer service life.
SCOPE
1.1 This test method covers qualitative determination of the acid resistance of ceramic decorations on returnable beer and beverage containers, to assure the necessary durability of the decoration.  
1.2 This test provides an indication of performance when and if the decoration is to be exposed to the acid solutions used in reclaiming bottles, and it also covers those instances where the beverages themselves have acidic properties.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM C676-04(2019)(Test Method)
Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware

SIGNIFICANCE AND USE
4.1 This test method provides a means of estimating the qualitative performance of glass enamel decorations that are exposed to high phosphate detergents during use. This test method also attempts to simulate accelerated exposure to high phosphate detergents prior to testing for heavy metal release, such as in Test Method C927 when long term performance of enamels must be evaluated.
SCOPE
1.1 This qualitative test method is designed to provide a convenient and reproducible method of determining the detergent resistance of decorations applied to glass tableware.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM C927-80(2019)e1(Test Method)
Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels

SIGNIFICANCE AND USE
5.1 The heavy metals, lead and cadmium, are known to cause serious health effects in man if consumed in excess. It is, therefore, important to measure the amount that may be extracted from an area of the glass drinking vessel in contact with the lip. Even though the amount of lead and cadmium extracted by this test method is in no way representative of the amount of the metals extracted by actual lip contact, the relative magnitude of metals extracted from one test specimen in relation to another test specimen provides an effective tool for discrimination.
SCOPE
1.1 This test method covers the determination of lead and cadmium extracted by acetic acid from the lip and rim area of glassware used for drinking and which is exteriorly decorated with ceramic glass enamels. The procedure of extraction may be expected to accelerate the release of lead and cadmium from the decorated area and to serve, therefore, as a severe test that is unlikely to be matched under the actual conditions of usage of such glassware. This test method is specific for lead and cadmium.  
Note 1: For additional information see Test Method C738.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM C373-18(2023)(Test Method)
Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products

SIGNIFICANCE AND USE
3.1 Measurement of density, porosity, and specific gravity is a tool for determining the degree of maturation of a ceramic body, or for determining structural properties that may be required for a given application.
SCOPE
1.1 These test methods covers procedures for determining water absorption, bulk density, apparent porosity, and apparent specific gravity of non-tile fired unglazed ceramic whiteware2 products, glazed or unglazed ceramic tiles, and glass tiles.  
1.2 The values stated in metric units are normative. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not normative.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM D3556-23(Guide)
Standard Guide for Deposition on Glassware During Mechanical Dishwashing

SIGNIFICANCE AND USE
3.1 This test method is intended as a laboratory screening test to determine performance of the detergent under actual use conditions, but will not necessarily predict performance under all end-use conditions.
SCOPE
1.1 This guide covers a procedure for measuring performance of a mechanical dishwashing detergent in terms of the buildup of spots and film on glassware. It is designed to evaluate household automatic dishwasher detergents but can be used as a screening test for institutional and commercial dishwashing products.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
  • Guide
    4 pages
    English language
    sale 15% off
ASTM
ASTM C675-91(2022)(Test Method)
Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers

SIGNIFICANCE AND USE
3.1 This test method provides a means for determining the durability of decorated returnable glass beverage containers which may be a prerequisite in product specifications.
SCOPE
1.1 This test method covers determination of the alkali resistance of ceramic labels (hereafter referred to as ACL (Applied Color Label) on returnable beverage bottles (hereafter referred to as ware) to ensure the necessary durability of the label. A number of states require the cleaning and sanitizing of this ware by washing in hot alkali solutions. Accelerated tests are needed to ensure that the ACL will withstand the anticipated number of washings and still present an acceptable ware identification and appearance.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM F1991-99(2021)(Test Method)
Standard Test Method for Performance of Chinese (Wok) Ranges

SIGNIFICANCE AND USE
5.1 The energy input rate is used to confirm that the Chinese range under test is operating at the manufacturer's rated input. This test also indicates any problems with the electric power supply or gas service pressure.  
5.2 The pilot light, where applicable, energy rate can be used by the food service operator to estimate energy consumption during noncooking periods.  
5.3 Heatup energy efficiency is a precise indicator of Chinese range energy performance under full-load conditions. This information enables the food service operator to consider energy performance when selecting a Chinese range.  
5.4 Production capacity is used by food service operators to choose a Chinese range that matches their food output requirements.
SCOPE
1.1 This test method evaluates the energy consumption and performance of Chinese ranges. The food service operator can use this evaluation to select a Chinese range and understand its energy performance.  
1.2 This test method is applicable to nonthermostatically-controlled, gas and electric Chinese ranges, including both discreet burners, elements, and induction units.  
1.3 The Chinese range can be evaluated with respect to the following (where applicable):  
1.3.1 Energy input rate (10.2),  
1.3.2 Pilot energy rate, if applicable (10.3), and  
1.3.3 Heatup energy efficiency and production capacity (10.5).  
1.4 The values stated in inch-pound units are to be regarded as standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    11 pages
    English language
    sale 15% off
ASTM
ASTM F1786-97(2021)(Test Method)
Standard Test Method for Performance of Braising Pans

SIGNIFICANCE AND USE
5.1 Use the maximum energy input rate test to confirm that the braising pan is operating within 5 % of the manufacturer's rated input so that testing may continue. This test method also may disclose any problems with the electric power supply or gas service pressure. The maximum input rate can be useful to food service operators for managing power demand.  
5.2 The capacity test determines the maximum volume of food product the pan can hold and the amount of food product that will be used in subsequent tests. Food service operators can use the results of this test method to select a braising pan, which is appropriately sized for their operation.  
5.3 Production capacity is used by food service operators to choose a braising pan that matches their food output.  
5.4 Heatup energy efficiency and simmer energy rate allow the operator to consider energy performance when selecting a braising pan.  
5.5 Use the surface temperature uniformity to select a braising pan suitable for griddling applications.  
5.6 Use the pilot energy rate to estimate energy consumption for gas-fired braising pans with standing pilots during non-cooking periods.
SCOPE
1.1 This test method evaluates the energy consumption and cooking performance of braising pans. The food service operator can use this evaluation to select a braising pan and understand its energy consumption and performance characteristics.  
Note 1: Braising pans also are commonly referred to as tilting skillets. This test method uses the term braising pan in accordance with Specification F1047.  
1.2 This test method is applicable to self-contained gas or electric braising pans. The braising pan can be evaluated with respect to the following, where applicable:  
1.2.1 Maximum energy input rate (10.2).  
1.2.2 Capacity (10.3).  
1.2.3 Heatup energy efficiency and energy rate (10.4).  
1.2.4 Production capacity (10.4).  
1.2.5 Simmer energy rate (10.5).  
1.2.6 Surface temperature uniformity, optional, (10.6).  
1.2.7 Pilot energy rate (10.7).  
1.3 The values stated in inch-pound units are to be regarded as standard. The SI units given in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    10 pages
    English language
    sale 15% off