ASTM D1655-15
(Specification)Standard Specification for Aviation Turbine Fuels
Standard Specification for Aviation Turbine Fuels
ABSTRACT
This specification covers purchases of aviation turbine fuel under contract and is intended primarily for use by purchasing agencies. This specification does not include all fuels satisfactory for reciprocating aviation turbine engines, but rather, defines the following specific types of aviation fuel for civil use: Jet A; and Jet A-1. The fuels shall be sampled and tested appropriately to examine their conformance to detailed requirements as to composition, volatility, fluidity, combustion, corrosion, thermal stability, contaminants, and additives.
SCOPE
1.1 This specification covers the use of purchasing agencies in formulating specifications for purchases of aviation turbine fuel under contract.
1.2 This specification defines specific types of aviation turbine fuel for civil use in the operation and certification of aircraft and describes fuels found satisfactory for the operation of aircraft and engines. Although not specifically designed for other applications, Specification D1655 fuels also may be used in other applications with or without further modification (for example, additization) when approved by the appropriate authority. The specification can be used as a standard in describing the quality of aviation turbine fuels from production to the aircraft.
1.3 This specification does not define the quality assurance testing and procedures necessary to ensure that fuel in the distribution system continues to comply with this specification after batch certification. Such procedures are defined elsewhere, for example in ICAO 9977, EI/JIG Standard 1530, JIG 1, JIG 2, API 1543, API 1595, and ATA-103.
1.4 This specification does not include all fuels satisfactory for aviation turbine engines. Certain equipment or conditions of use may permit a wider, or require a narrower, range of characteristics than is shown by this specification.
1.5 Aviation turbine fuels defined by this specification may be used in other than turbine engines that are specifically designed and certified for this fuel.
1.6 This specification no longer includes wide-cut aviation turbine fuel (Jet B). FAA has issued a Special Airworthiness Information Bulletin which now approves the use of Specification D6615 to replace Specification D1655 as the specification for Jet B and refers users to this standard for reference.
1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:D1655 −15 AnAmerican National Standard
Standard Specification for
Aviation Turbine Fuels
This standard is issued under the fixed designation D1655; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope* 2. Referenced Documents
1.1 Thisspecificationcoverstheuseofpurchasingagencies
2.1 ASTM Standards:
in formulating specifications for purchases of aviation turbine
D56Test Method for Flash Point by Tag Closed Cup Tester
fuel under contract.
D86Test Method for Distillation of Petroleum Products at
Atmospheric Pressure
1.2 This specification defines specific types of aviation
D93Test Methods for Flash Point by Pensky-Martens
turbine fuel for civil use in the operation and certification of
Closed Cup Tester
aircraftanddescribesfuelsfoundsatisfactoryfortheoperation
D129Test Method for Sulfur in Petroleum Products (Gen-
of aircraft and engines.Although not specifically designed for
otherapplications,SpecificationD1655fuelsalsomaybeused eral High Pressure Decomposition Device Method)
D130Test Method for Corrosiveness to Copper from Petro-
in other applications with or without further modification (for
example, additization) when approved by the appropriate leum Products by Copper Strip Test
D156Test Method for Saybolt Color of Petroleum Products
authority. The specification can be used as a standard in
describingthequalityofaviationturbinefuelsfromproduction (Saybolt Chromometer Method)
to the aircraft. D240Test Method for Heat of Combustion of Liquid Hy-
drocarbon Fuels by Bomb Calorimeter
1.3 This specification does not define the quality assurance
D323TestMethodforVaporPressureofPetroleumProducts
testing and procedures necessary to ensure that fuel in the
(Reid Method)
distribution system continues to comply with this specification
D381Test Method for Gum Content in Fuels by Jet Evapo-
after batch certification. Such procedures are defined
ration
elsewhere, for example in ICAO9977, EI/JIG Standard1530,
D445Test Method for Kinematic Viscosity of Transparent
JIG1, JIG2, API1543, API1595, and ATA-103.
andOpaqueLiquids(andCalculationofDynamicViscos-
1.4 This specification does not include all fuels satisfactory
ity)
for aviation turbine engines. Certain equipment or conditions
D1266TestMethodforSulfurinPetroleumProducts(Lamp
of use may permit a wider, or require a narrower, range of
Method)
characteristics than is shown by this specification.
D1298Test Method for Density, Relative Density, or API
1.5 Aviation turbine fuels defined by this specification may
Gravity of Crude Petroleum and Liquid Petroleum Prod-
be used in other than turbine engines that are specifically
ucts by Hydrometer Method
designed and certified for this fuel.
D1319TestMethodforHydrocarbonTypesinLiquidPetro-
leum Products by Fluorescent Indicator Adsorption
1.6 This specification no longer includes wide-cut aviation
D1322Test Method for Smoke Point of Kerosine and
turbine fuel (Jet B). FAA has issued a Special Airworthiness
Aviation Turbine Fuel
Information Bulletin which now approves the use of Specifi-
D1405Test Method for Estimation of Net Heat of Combus-
cation D6615 to replace Specification D1655 as the specifica-
tion of Aviation Fuels
tion for Jet B and refers users to this standard for reference.
D1660Method of Test for Thermal Stability of Aviation
1.7 The values stated in SI units are to be regarded as
Turbine Fuels (Withdrawn 1992)
standard. No other units of measurement are included in this
standard.
1 2
This specification is under the jurisdiction of ASTM Committee D02 on For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Petroleum Products, Liquid Fuels, and Lubricants and is the direct responsibility of contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Subcommittee D02.J0.01 on Jet Fuel Specifications. Standards volume information, refer to the standard’s Document Summary page on
Current edition approved Jan. 1, 2015. Published February 2015. Originally the ASTM website.
approved in 1959. Last previous edition approved in 2014 as D1655–14c. DOI: The last approved version of this historical standard is referenced on
10.1520/D1655-15. www.astm.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
D1655−15
D1840Test Method for Naphthalene Hydrocarbons inAvia- D4953Test Method for Vapor Pressure of Gasoline and
tion Turbine Fuels by Ultraviolet Spectrophotometry Gasoline-Oxygenate Blends (Dry Method)
D5001Test Method for Measurement of Lubricity of Avia-
D2276Test Method for Particulate Contaminant inAviation
tion Turbine Fuels by the Ball-on-Cylinder Lubricity
Fuel by Line Sampling
Evaluator (BOCLE)
D2386Test Method for Freezing Point of Aviation Fuels
D5006Test Method for Measurement of Fuel System Icing
D2622Test Method for Sulfur in Petroleum Products by
Inhibitors (Ether Type) in Aviation Fuels
Wavelength Dispersive X-ray Fluorescence Spectrometry
D5190Test Method for Vapor Pressure of Petroleum Prod-
D2624Test Methods for Electrical Conductivity ofAviation
ucts (Automatic Method) (Withdrawn 2012)
and Distillate Fuels
D5191Test Method for Vapor Pressure of Petroleum Prod-
D2887Test Method for Boiling Range Distribution of Pe-
ucts (Mini Method)
troleum Fractions by Gas Chromatography
D5452Test Method for Particulate Contamination in Avia-
D2892Test Method for Distillation of Crude Petroleum
tion Fuels by Laboratory Filtration
(15-Theoretical Plate Column)
D5453Test Method for Determination of Total Sulfur in
D3120Test Method for Trace Quantities of Sulfur in Light
Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel
Liquid Petroleum Hydrocarbons by Oxidative Microcou-
Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
lometry
D5972Test Method for Freezing Point of Aviation Fuels
D3227 Test Method for (Thiol Mercaptan) Sulfur in
(Automatic Phase Transition Method)
Gasoline, Kerosine,AviationTurbine, and Distillate Fuels
D6045Test Method for Color of Petroleum Products by the
(Potentiometric Method)
Automatic Tristimulus Method
D3240Test Method for Undissolved Water In Aviation
D6379Test Method for Determination of Aromatic Hydro-
Turbine Fuels
carbon Types in Aviation Fuels and Petroleum
D3241Test Method for Thermal Oxidation Stability of
Distillates—High Performance Liquid Chromatography
Aviation Turbine Fuels
Method with Refractive Index Detection
D3242Test Method for Acidity in Aviation Turbine Fuel
D6469GuideforMicrobialContaminationinFuelsandFuel
D3338Test Method for Estimation of Net Heat of Combus-
Systems
tion of Aviation Fuels
D6615Specification for Jet B Wide-Cut Aviation Turbine
D3343Test Method for Estimation of Hydrogen Content of
Fuel
Aviation Fuels
D6751Specification for Biodiesel Fuel Blend Stock (B100)
D3701Test Method for Hydrogen Content of Aviation for Middle Distillate Fuels
Turbine Fuels by Low Resolution Nuclear Magnetic D7042Test Method for Dynamic Viscosity and Density of
Resonance Spectrometry Liquids by Stabinger Viscometer (and the Calculation of
D3828Test Methods for Flash Point by Small Scale Closed Kinematic Viscosity)
D7153Test Method for Freezing Point of Aviation Fuels
Cup Tester
(Automatic Laser Method)
D3948TestMethodforDeterminingWaterSeparationChar-
D7154Test Method for Freezing Point of Aviation Fuels
acteristicsofAviationTurbineFuelsbyPortableSeparom-
(Automatic Fiber Optical Method)
eter
D7345Test Method for Distillation of Petroleum Products
D4052Test Method for Density, Relative Density, and API
and Liquid Fuels at Atmospheric Pressure (Micro Distil-
Gravity of Liquids by Digital Density Meter
lation Method)
D4057Practice for Manual Sampling of Petroleum and
D7524Test Method for Determination of Static Dissipater
Petroleum Products
Additives (SDA) in Aviation Turbine Fuel and Middle
D4171Specification for Fuel System Icing Inhibitors
Distillate Fuels—High Performance Liquid Chromato-
D4176TestMethodforFreeWaterandParticulateContami-
graph (HPLC) Method
nation in Distillate Fuels (Visual Inspection Procedures)
D7566Specification for Aviation Turbine Fuel Containing
D4294Test Method for Sulfur in Petroleum and Petroleum
Synthesized Hydrocarbons
Products by Energy Dispersive X-ray Fluorescence Spec-
D7797Test Method for Determination of the Fatty Acid
trometry
Methyl Esters Content of Aviation Turbine Fuel Using
D4306Practice for Aviation Fuel Sample Containers for
Flow Analysis by Fourier Transform Infrared Spectros-
Tests Affected by Trace Contamination
copy – Rapid Screening Method
D4529Test Method for Estimation of Net Heat of Combus-
E29Practice for Using Significant Digits in Test Data to
tion of Aviation Fuels
Determine Conformance with Specifications
D4809Test Method for Heat of Combustion of Liquid 4
2.2 IP Standards:
Hydrocarbon Fuels by Bomb Calorimeter (Precision
EI/JIG 1530 Quality Assurance Requirements for the
Method)
Manufacture, Storage and Distribution of Aviation Fuels
D4865Guide for Generation and Dissipation of Static Elec-
to Airports
tricity in Petroleum Fuel Systems
D4952Test Method for Qualitative Analysis for Active 4
Available from Energy Institute, 61 New Cavendish St., London, WIG 7AR,
Sulfur Species in Fuels and Solvents (Doctor Test) U.K., http://www.energyinst.org.uk.
D1655−15
IP12Determination of Specific Energy IP583Determination of the Fatty Acid Methyl Esters Con-
IP16Determination of Freezing Point of Aviation Fuels— tent of Aviation Turbine Fuel Using Flow Analysis by
Manual Method Fourier Transform Infrared Spectroscopy—Rapid Screen-
IP57Petroleum Products—Determination of the Smoke ing Method
Point of Kerosine IP585Determination of FattyAcid Methyl Esters (FAME),
IP 71 Section 1 Petroleum Products—Transparent and Derived from Bio-diesel Fuel, inAviationTurbine Fuel—
Opaque Liquids—Determination of Kinematic Viscosity GC-MS with Selective Ion Monitoring/Scan Detection
and Calculation of Dynamic Viscosity Method
IP123Petroleum Products—Determination of Distillation IP590Determination of Fatty Acid Methyl Esters (FAME)
Characteristics at Atmospheric Pressure in Aviation Fuel—HPLC Evaporative Light Scattering
IP154Petroleum Products—Corrosiveness to Copper— Detector Method
Copper Strip Test IP599Determination of Fatty Acid Methyl Esters (FAME)
IP 156 Petroleum Products and Related Materials— in Aviation Turbine Fuel by Gas Chromatography using
Determination of Hydrocarbon Types—Fluorescent Indi- Heart-cut and Refocusing
cator Adsorption Method
2.3 API Standards:
IP160Crude Petroleum and Liquid Petroleum Products—
API1543Documentation, Monitoring and Laboratory Test-
Laboratory Determination of Density— Hydrometer
ing of Aviation Fuel During Shipment from Refinery to
Method
Airport
IP170Determination of Flash Point—Abel Closed-Cup
API1595Design, Construction, Operation, Maintenance,
Method
and Inspection ofAviation Pre-Airfield StorageTerminals
IP216Particulate Contaminant in Aviation Fuel 6
2.4 Joint Inspection Group Standards:
IP225Copper Content of Aviation Turbine Fuel
JIG1Aviation Fuel Quality Control & Operating Standards
IP227Silver Corrosion of Aviation Turbine Fuel
for Into-Plane Fuelling Services
IP274Determination of Electrical Conductivity ofAviation
JIG2Aviation Fuel Quality Control & Operating Standards
and Distillate Fuels
for Airport Depots & Hydrants
IP323Determination ofThermal Oxidation Stability of Gas
2.5 ANSI Standard:
Turbine Fuels
ANSI 863Report of Test Results
IP 336 Petroleum Products—Determination of Sulfur
2.6 Other Standards:
Content—Energy-Dispersive X-ray Fluorescence Spec-
Defence Standard (Def Stan) 91-91Turbine Fuel, Aviation
trometry
Kerosine Type, Jet A-1
IP342Petroleum Products—Determination of Thiol (Mer-
IATAGuidance Material on Microbiological Contamination
captan) Sulfur in Light and Middle Distillate Fuels—
in Aircraft Fuel TanksRef. No: 9680-02
Potentiometric Method
EN14214Automotive Fuels—Fatty Acid Methyl Esters
IP354DeterminationoftheAcidNumberofAviationFuels-
(FAME) for Diesel Engines—Requirements and Test
Colour-Indicator Titration Method
Methods
IP 365 Crude Petroleum and Petroleum Products—
Bulletin Number 65MSEP Protocol
Determination of Density—Oscillating U-tube Method
ATA-103Standard for Jet Fuel Quality Control atAirports
IP 406 Petroleum Products—Determination of Boiling
ICAO9977Manual on Civil Aviation Jet Fuel Supply
Range Distribution by Gas Chromatography
IP423Determination of Particulate Contamination in Avia-
tion Turbine Fuels by Laboratory Filtration
Available from American Petroleum Institute (API), 1220 L. St., NW,
IP435Determination of the Freezing Point of Aviation
Washington, DC 20005-4070, http://www.api.org.
Turbine Fuels by theAutomatic Phase Transition Method
Available from Joint Inspection Group (JIG), http://www.jigonline.com.
IP436Determination of Aromatic Hydrocarbon Types in Available fromAmerican National Standards Institute (ANSI), 25 W. 43rd St.,
4th Floor, New York, NY 10036.
Aviation Fuels and Petroleum Distillates— High Perfor-
Available from Procurement Executive DFS (Air), Ministry of Defence, St.
mance Liquid Chromatography Method with Refractive
Giles Court 1, St. Giles High St., London WC2H 8LD.
Index Detection
Available from International Air Transport Association (IATA), (Head Office)
800 Place Victoria, PO Box 113, Montreal, H4Z 1M1, Quebec, Canada. www.iata-
IP523Determination of Flash Point—Rapid Equilibrium
online.com.
Closed Cup Method
Available from European Committee for Standardization (CEN), 36 rue de
IP528Determination for the Freezing Point of Aviation
Stassart, B-1050, Brussels, Belgium, http://www.cenorm.be.
Turbine Fuels—Automatic Fibre Optic Method
Available from Joint Inspection Group (JIG), http://www.jigonline.com.
Available from Air Transport Association of America, Inc. (ATA) d/b/a
IP529Determination of the Freezing Point of Aviation
Airlines for America, 1301 Pennsylvania Ave. NW, Suite 1100, Washington, D.C.
Turbine Fuels—Automatic Laser Method
20004, http://www.airlines.org.
IP540Determination of the Existent Gum Content ofAvia- 13
Available from International Civil Aviation Organization (ICAO), 999 Uni-
tion Turbine Fuel—Jet Evaporation Method versity St., Montreal, Quebec H3C 5H7, Canada, http://www.icao.int.
D1655−15
AFRL-RQ-WP-TR-2013-0271Determination of the Mini- Addi
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: D1655 − 14c D1655 − 15 An American National Standard
Standard Specification for
Aviation Turbine Fuels
This standard is issued under the fixed designation D1655; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope*
1.1 This specification covers the use of purchasing agencies in formulating specifications for purchases of aviation turbine fuel
under contract.
1.2 This specification defines specific types of aviation turbine fuel for civil use in the operation and certification of aircraft and
describes fuels found satisfactory for the operation of aircraft and engines. Although not specifically designed for other
applications, Specification D1655 fuels also may be used in other applications with or without further modification (for example,
additization) when approved by the appropriate authority. The specification can be used as a standard in describing the quality of
aviation turbine fuels from production to the aircraft.
1.3 This specification does not define the quality assurance testing and procedures necessary to ensure that fuel in the
distribution system continues to comply with this specification after batch certification. Such procedures are defined elsewhere, for
example in ICAO 9977, EI/JIG Standard 1530, JIG 1, JIG 2, API 1543, API 1595, and ATA-103.
1.4 This specification does not include all fuels satisfactory for aviation turbine engines. Certain equipment or conditions of use
may permit a wider, or require a narrower, range of characteristics than is shown by this specification.
1.5 Aviation turbine fuels defined by this specification may be used in other than turbine engines that are specifically designed
and certified for this fuel.
1.6 This specification no longer includes wide-cut aviation turbine fuel (Jet B). FAA has issued a Special Airworthiness
Information Bulletin which now approves the use of Specification D6615 to replace Specification D1655 as the specification for
Jet B and refers users to this standard for reference.
1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
2. Referenced Documents
2.1 ASTM Standards:
D56 Test Method for Flash Point by Tag Closed Cup Tester
D86 Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D93 Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
D129 Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)
D130 Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
D156 Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
D240 Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
D323 Test Method for Vapor Pressure of Petroleum Products (Reid Method)
D381 Test Method for Gum Content in Fuels by Jet Evaporation
D445 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
D1266 Test Method for Sulfur in Petroleum Products (Lamp Method)
D1298 Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by
Hydrometer Method
This specification is under the jurisdiction of ASTM Committee D02 on Petroleum Products, Liquid Fuels, and Lubricants and is the direct responsibility of Subcommittee
D02.J0.01 on Jet Fuel Specifications.
Current edition approved Dec. 15, 2014Jan. 1, 2015. Published January 2015February 2015. Originally approved in 1959. Last previous edition approved in 2014 as
D1655 – 14b.D1655 – 14c. DOI: 10.1520/D1655-14C.10.1520/D1655-15.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
D1655 − 15
D1319 Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
D1322 Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
D1405 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D1660 Method of Test for Thermal Stability of Aviation Turbine Fuels (Withdrawn 1992)
D1840 Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
D2276 Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
D2386 Test Method for Freezing Point of Aviation Fuels
D2622 Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
D2624 Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
D2887 Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
D2892 Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
D3120 Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
D3227 Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric
Method)
D3240 Test Method for Undissolved Water In Aviation Turbine Fuels
D3241 Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
D3242 Test Method for Acidity in Aviation Turbine Fuel
D3338 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D3343 Test Method for Estimation of Hydrogen Content of Aviation Fuels
D3701 Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance
Spectrometry
D3828 Test Methods for Flash Point by Small Scale Closed Cup Tester
D3948 Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D4057 Practice for Manual Sampling of Petroleum and Petroleum Products
D4171 Specification for Fuel System Icing Inhibitors
D4176 Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
D4294 Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
D4306 Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
D4529 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D4809 Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
D4865 Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
D4952 Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
D4953 Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
D5001 Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator
(BOCLE)
D5006 Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
D5190 Test Method for Vapor Pressure of Petroleum Products (Automatic Method) (Withdrawn 2012)
D5191 Test Method for Vapor Pressure of Petroleum Products (Mini Method)
D5452 Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
D5453 Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel,
and Engine Oil by Ultraviolet Fluorescence
D5972 Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
D6045 Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
D6379 Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High
Performance Liquid Chromatography Method with Refractive Index Detection
D6469 Guide for Microbial Contamination in Fuels and Fuel Systems
D6615 Specification for Jet B Wide-Cut Aviation Turbine Fuel
D6751 Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
D7042 Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic
Viscosity)
D7153 Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
D7154 Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
D7345 Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation
Method)
D7524 Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate
The last approved version of this historical standard is referenced on www.astm.org.
D1655 − 15
Fuels—High Performance Liquid Chromatograph (HPLC) Method
D7566 Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
D7797 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis
by Fourier Transform Infrared Spectroscopy – Rapid Screening Method
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
2.2 IP Standards:
EI/JIG 1530 Quality Assurance Requirements for the Manufacture, Storage and Distribution of Aviation Fuels to Airports
IP 12 Determination of Specific Energy
IP 16 Determination of Freezing Point of Aviation Fuels—Manual Method
IP 57 Petroleum Products—Determination of the Smoke Point of Kerosine
IP 71 Section 1 Petroleum Products—Transparent and Opaque Liquids—Determination of Kinematic Viscosity and Calculation
of Dynamic Viscosity
IP 123 Petroleum Products—Determination of Distillation Characteristics at Atmospheric Pressure
IP 154 Petroleum Products—Corrosiveness to Copper—Copper Strip Test
IP 156 Petroleum Products and Related Materials—Determination of Hydrocarbon Types—Fluorescent Indicator Adsorption
Method
IP 160 Crude Petroleum and Liquid Petroleum Products—Laboratory Determination of Density— Hydrometer Method
IP 170 Determination of Flash Point—Abel Closed-Cup Method
IP 216 Particulate Contaminant in Aviation Fuel
IP 225 Copper Content of Aviation Turbine Fuel
IP 227 Silver Corrosion of Aviation Turbine Fuel
IP 274 Determination of Electrical Conductivity of Aviation and Distillate Fuels
IP 323 Determination of Thermal Oxidation Stability of Gas Turbine Fuels
IP 336 Petroleum Products—Determination of Sulfur Content—Energy-Dispersive X-ray Fluorescence Spectrometry
IP 342 Petroleum Products—Determination of Thiol (Mercaptan) Sulfur in Light and Middle Distillate Fuels—Potentiometric
Method
IP 354 Determination of the Acid Number of Aviation Fuels-Colour-Indicator Titration Method
IP 365 Crude Petroleum and Petroleum Products—Determination of Density—Oscillating U-tube Method
IP 406 Petroleum Products—Determination of Boiling Range Distribution by Gas Chromatography
IP 423 Determination of Particulate Contamination in Aviation Turbine Fuels by Laboratory Filtration
IP 435 Determination of the Freezing Point of Aviation Turbine Fuels by the Automatic Phase Transition Method
IP 436 Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates— High Performance Liquid
Chromatography Method with Refractive Index Detection
IP 523 Determination of Flash Point—Rapid Equilibrium Closed Cup Method
IP 528 Determination for the Freezing Point of Aviation Turbine Fuels—Automatic Fibre Optic Method
IP 529 Determination of the Freezing Point of Aviation Turbine Fuels—Automatic Laser Method
IP 540 Determination of the Existent Gum Content of Aviation Turbine Fuel—Jet Evaporation Method
IP 583 Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier
Transform Infrared Spectroscopy—Rapid Screening Method
IP 585 Determination of Fatty Acid Methyl Esters (FAME), Derived from Bio-diesel Fuel, in Aviation Turbine Fuel—GC-MS
with Selective Ion Monitoring/Scan Detection Method
IP 590 Determination of Fatty Acid Methyl Esters (FAME) in Aviation Fuel—HPLC Evaporative Light Scattering Detector
Method
IP 599 Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel by Gas Chromatography using Heart-cut
and Refocusing
2.3 API Standards:
API 1543 Documentation, Monitoring and Laboratory Testing of Aviation Fuel During Shipment from Refinery to Airport
API 1595 Design, Construction, Operation, Maintenance, and Inspection of Aviation Pre-Airfield Storage Terminals
2.4 Joint Inspection Group Standards:
JIG 1 Aviation Fuel Quality Control & Operating Standards for Into-Plane Fuelling Services
JIG 2 Aviation Fuel Quality Control & Operating Standards for Airport Depots & Hydrants
2.5 ANSI Standard:
ANSI 863 Report of Test Results
Available from Energy Institute, 61 New Cavendish St., London, WIG 7AR, U.K., http://www.energyinst.org.uk.
Available from American Petroleum Institute (API), 1220 L. St., NW, Washington, DC 20005-4070, http://www.api.org.
Available from Joint Inspection Group (JIG), http://www.jigonline.com.
Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036.
D1655 − 15
2.6 Other Standards:
Defence Standard (Def Stan) 91-91 Turbine Fuel, Aviation Kerosine Type, Jet A-1
IATA Guidance Material on Microbiological Contamination in Aircraft Fuel Tanks Ref. No: 9680-02
EN14214 Automotive Fuels—Fatty Acid Methyl Esters (FAME) for Diesel Engines—Requirements and Test Methods
Bulletin Number 65 MSEP Protocol
ATA-103 Standard for Jet Fuel Quality Control at Airports
ICAO 9977 Manual on Civil Aviation Jet Fuel Supply
Available from Procurement Executive DFS (Air), Ministry of Defence, St. Giles Court 1, St. Giles High St., London WC2H 8LD.
Available from International Air Transport Association (IATA), (Head Office) 800 Place Victoria, PO Box 113, Montreal, H4Z 1M1, Quebec, Canada.
www.iataonline.com.
Available from European Committee for Standardization (CEN), 36
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.