ASTM F707/F707M-94(2001)

Standard Specification for Modular Gage Boards

SCOPE
1.1 This specification covers modular gage boards for mounting 89-mm (3 ½-in.), 114-mm (4½-in.), 152-mm (6-in.), and 216-mm (8 ½-in.) dial size pressure gages and dial thermometers for miscellaneous shipboard applications.  
1.2 Gage boards ordered under this specification are suitable for pressure gages and dial thermometers with either turret or back flanged type cases and with either back or bottom connections (see Appendix X1).  
1.3 Gage mounting dimensions shall be in accordance with ANSI B40.1.  
1.4 The values stated in metric units (SI) are to be regarded as the standard. The values given in parentheses (inch/pound) are provided for information purposes.
Note—Gage boards covered by this specification are those normally supplied by the shipyard as opposed to the shipyard's equipment subcontractor.

General Information

• Status: Historical
• Publication Date: 14-Aug-1994
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: F25 - Ships and Marine Technology
• Drafting Committee: F25.11 - Machinery and Piping Systems

Relations

• Replaces: ASTM F707/F707M-94 - Standard Specification for Modular Gage Boards
• Effective Date: 15-Aug-1994
• Replaced By: ASTM F707/F707M-94(2006) - Standard Specification for Modular Gage Boards
• Effective Date: 01-Feb-2006

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation: F 707/F 707M – 94 (Reapproved 2001)
Standard Specification for
Modular Gage Boards
This standard is issued under the fixed designation F 707/F 707M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope 3. Classification
1.1 This specification covers modular gage boards for 3.1 Gage boards are furnished in two types as follows:
1 1 1
mounting 89-mm (3 ⁄2-in.), 114-mm (4 ⁄2-in.), 152-mm (6-in.), 3.1.1 Type I—Gage boards for mounting 89-mm (3 ⁄2-in.)
1 1
and 216-mm (8 ⁄2-in.) dial size pressure gages and dial ther- and 114-mm (4 ⁄2-in.) dial size gages as specified in Section 5.
mometers for miscellaneous shipboard applications. 3.1.2 Type II—Gage boards for mounting 152-mm (6-in.)
1.2 Gageboardsorderedunderthisspecificationaresuitable and 216-mm (8 ⁄2-in.) dial size gages as specified in Section 5.
for pressure gages and dial thermometers with either turret or 3.2 Gage boards are furnished in two grades as follows:
back flanged type cases and with either back or bottom 3.2.1 Grade a—Gage boards are to be manufactured from
connections (see Appendix X1). carbon steel as specified in Section 5.
1.3 Gage mounting dimensions shall be in accordance with 3.2.2 Grade b—Gage boards are to be manufactured from
ANSI B 40.1. aluminum alloy as specified in Section 5.
1.4 The values stated in metric units (SI) are to be regarded
4. Ordering Information
as the standard. The values given in parentheses (inch/pound)
are provided for information purposes. 4.1 Orders for gage boards under this specification shall
include the following information:
NOTE 1—Gage boards covered by this specification are those normally
4.1.1 Quantity (number of gage boards),
supplied by the shipyard as opposed to the shipyard’s equipment subcon-
4.1.2 Name of item (gage board),
tractor.
4.1.3 Type (Type I orType II as specified by purchaser), see
2. Referenced Documents
3.1.1 and 3.1.2,
4.1.4 Grade (GradeaorGradebasspecifiedbypurchaser),
2.1 ASTM Standards:
see 3.2.1 and 3.2.2,
B 40.1 Gages, Pressure and Vacuum, Indicating Dial
4.1.5 Paint (as specified by purchaser), see 7.2,
Type—Elastic Element
4.1.6 Drilling for gage mounting (as specified by pur-
2.2 Other Standards:
chaser), see 5.1.1, and
Fed Spec. TT-P-645 Primer, Paint, Zinc-Chromate, Alkyd
4.1.7 ASTM designation and date of issue.
Type
DoD-P-15328 Primer (Wash), Pretreatment (Formula No.
5. Materials and Manufacture
117 for Metals) (Metric)
5.1 Unless otherwise specified the gage boards shall be
manufactured from 11-gage (manufacturers standard gage)
carbon steel for Grade a and 3 mm ( ⁄8 in.) thick aluminum
This specification is under the jurisdiction of ASTM Committee F25 on Ships
alloy for Grade b. Materials shall be capable of being bent at
and Marine Technology and is the direct responsibility of Subcommittee F25.11 on
room temperature through 90° in any direction to an inside
Machinery and Piping Systems.
radius equal to its thickness without cracking on the outside of
Current edition approved Aug. 15, 1994. Published October 1994. Originally
published F 707 – 81. Last previous edition F 707 – 82 (1988)e .
the bent portion.
Available from American National Standards Institute, 25 W. 43rd St., 4th
5.1.1 Unless otherwise specified, Type I gage boards shall
Floor, New York, NY 10036.
be drilled for mounting both 89-mm (3 ⁄2-in.) and 114-mm
AvailablefromStandardizationDocumentsOrderDesk,Bldg.4SectionD,700
Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS. (4 ⁄2-in.) dial size gages and Type II gage boards shall be
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
F 707/F 707M – 94 (2001)
drilled for mounting both 152-mm (6-in.) and 216-mm (8 ⁄2- or equal (yellow) 0.038-mm (1.5-mils) dry film thickness.
in.) dial size gages. When s
...