iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM F1548-01(2023)

(Specification)

Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications

Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications

ABSTRACT
This specification defines classification, materials, test requirements, inspection certification, marking and packaging of fittings for use with gasketed mechanical couplings used in piping applications. These fittings are classified into the following design types: Type I and Type II. The design of the fittings may be qualified by mathematical analysis in accordance with piping codes.
SCOPE
1.1 This specification defines classification, materials, test requirements, inspection certification, marking and packaging of fittings for use with gasketed mechanical couplings complying to Specification F1476.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

Status
Published
Publication Date
30-Apr-2023
ICS
47.020.30 - Piping systems
Technical Committee
F25 - Ships and Marine Technology
Drafting Committee
F25.11 - Machinery and Piping Systems
Current Stage
Ref Project

Relations

Refers
ASTM A53/A53M-24 - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
Effective Date
01-Mar-2024
Refers
ASTM A312/A312M-24 - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
Effective Date
01-Mar-2024
Refers
ASTM B75/B75M-20 - Standard Specification for Seamless Copper Tube
Effective Date
01-Apr-2020
Refers
ASTM A403/A403M-19a - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
Effective Date
01-Nov-2019
Refers
ASTM A536-84(2019)e1 - Standard Specification for Ductile Iron Castings
Effective Date
01-May-2019
Refers
ASTM B580-79(2019) - Standard Specification for Anodic Oxide Coatings on Aluminum
Effective Date
01-Apr-2019
Refers
ASTM B75/B75M-19 - Standard Specification for Seamless Copper Tube
Effective Date
01-Apr-2019
Refers
ASTM A403/A403M-19 - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
Effective Date
01-Mar-2019
Refers
ASTM A403/A403M-18a - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
Effective Date
01-Sep-2018
Refers
ASTM A234/A234M-18a - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
Effective Date
01-Sep-2018
Refers
ASTM B26/B26M-18 - Standard Specification for Aluminum-Alloy Sand Castings
Effective Date
15-May-2018
Refers
ASTM A234/A234M-18 - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
Effective Date
01-Mar-2018
Refers
ASTM A403/A403M-18 - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
Effective Date
01-Mar-2018
Refers
ASTM A743/A743M-17 - Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
Effective Date
01-Nov-2017
Refers
ASTM A234/A234M-17 - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
Effective Date
15-May-2017

Buy Standard

ASTM F1548-01(2023) - Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping ApplicationsASTM F1548-01(2023) - Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
PreviousNext
Technical specification
ASTM F1548-01(2023) - Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: F1548 − 01 (Reapproved 2023) An American National Standard
Standard Specification for
Performance of Fittings for Use with Gasketed Mechanical
Couplings Used in Piping Applications
This standard is issued under the fixed designation F1548; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope A403/A403M Specification for Wrought Austenitic Stainless
Steel Piping Fittings
1.1 This specification defines classification, materials, test
A536 Specification for Ductile Iron Castings
requirements, inspection certification, marking and packaging
A743/A743M Specification for Castings, Iron-Chromium,
of fittings for use with gasketed mechanical couplings com-
Iron-Chromium-Nickel, Corrosion Resistant, for General
plying to Specification F1476.
Application
1.2 This international standard was developed in accor-
B26/B26M Specification for Aluminum-Alloy Sand Cast-
dance with internationally recognized principles on standard-
ings
ization established in the Decision on Principles for the
B75/B75M Specification for Seamless Copper Tube
Development of International Standards, Guides and Recom-
B210 Specification for Aluminum and Aluminum-Alloy
mendations issued by the World Trade Organization Technical
Drawn Seamless Tubes (Metric) B0210_B0210M
Barriers to Trade (TBT) Committee.
B369 Specification for Copper-Nickel Alloy Castings
B580 Specification for Anodic Oxide Coatings on Alumi-
2. Referenced Documents
num
2.1 ASTM Standards:
B584 Specification for Copper Alloy Sand Castings for
NOTE 1—See Table 1 for equivalency listing of applicable, equivalent General Applications
specifications.
B633 Specification for Electrodeposited Coatings of Zinc on
A47/A47M Specification for Ferritic Malleable Iron Cast-
Iron and Steel
ings
F1476 Specification for Performance of Gasketed Mechani-
A48/A48M Specification for Gray Iron Castings
cal Couplings for Use in Piping Applications
A53/A53M Specification for Pipe, Steel, Black and Hot-
2.2 ANSI Standards:
Dipped, Zinc-Coated, Welded and Seamless
B36.10 Welded and Seamless Wrought Steel Pipe
A153/A153M Specification for Zinc Coating (Hot-Dip) on
B36.19 Stainless Steel Pipe
Iron and Steel Hardware
Z540.1 Calibration Laboratories in Measuring Test Equip-
A216/A216M Specification for Steel Castings, Carbon, Suit-
ment
able for Fusion Welding, for High-Temperature Service
2.3 ANSI/AWWA Standards:
A234/A234M Specification for Piping Fittings of Wrought
C151/A21.51 Ductile-Iron Pipe, Centrifugally Cast in Metal
Carbon Steel and Alloy Steel for Moderate and High
Molds or Sand-Lined Molds, for Water and Other Liquids
Temperature Service
C606–87 Grooved and Shouldered Joints
A312/A312M Specification for Seamless, Welded, and
2.4 British Standards:
Heavily Cold Worked Austenitic Stainless Steel Pipes
BS 729 Specification for Hot Dip Galvanized Coatings on
A395/A395M Specification for Ferritic Ductile Iron
Iron and Steel Articles
Pressure-Retaining Castings for Use at Elevated Tempera-
BS 1400 Specification for Copper Alloy Ingots and Copper
tures
Alloy and High Conductivity Copper Castings
BS 1452 Specification for Flake Graphite Cast Iron
This specification is under the jurisdiction of ASTM Committee F25 on Ships
BS 1471 Specification for Wrought Aluminum and Alumi-
and Marine Technology and is the direct responsibility of Subcommittee F25.11 on
num Alloys for General Engineering Purposes—Drawn
Machinery and Piping Systems.
Current edition approved May 1, 2023. Published June 2023. Originally
Tube
approved in 1994. Last previous edition approved in 2018 as F1548 – 01 (2018).
DOI: 10.1520/F1548-01R23.
2 3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or Available from American National Standards Institute (ANSI), 25 W. 43rd St.,
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM 4th Floor, New York, NY 10036, http://www.ansi.org.
Standards volume information, refer to the standard’s Document Summary page on Available from British Standards Institution (BSI), 389 Chiswick High Rd.,
the ASTM website. London W4 4AL, U.K., http://www.bsigroup.com.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
F1548 − 01 (2023)
TABLE 1 Specification Equivalency Table
1459 Metallic Coatings—Protection Against Corrosion by
Spec. Ref. U.S. Designation British ISO Hot Dip Galvanizing—Guiding Principles
Number ASTM Standard Standard
1460 Metallic Coatings—Hot Dip Galvanized Coatings on
Ferrous Materials—Determination of the Mass Per Unit
1 A47/A47M 6681 5922
Area—Gravimetric Method
2 A48/A48M 1452 —
3 A53/A53M 3601 — 1461 Metallic Coatings—Hot Dipped Galvanized Coatings
4 A153/A153M 729 1459, 1460, 1461
on Fabricated Ferrous Products—Requirements
5 A216/A216M 3100 —
2081 Metallic Coatings—Electroplated Coatings of Zinc on
6 A234/A234M 1640 Pt. 1 —
7 A312/A312M 3605 — Iron or Steel
8 A395/A395M — —
2531 Ductile Iron Pipes, Fittings and Accessories for Pres-
9 A403/A403M 1640 Pt. 2 —
sure Pipe Lines
10 A536 4772 2531, 4179, 8179
11 A743/A743M 3100 —
3522 Cast Aluminum Alloys—Chemical Composition and
12 B26/B26M 1490 3522, 7722
Mechanical Properties
13 B75/B75M 2871 —
4179 Ductile Iron Pipes for Pressure and Non-Pressure
14 B210 1471 209
15 B369 3071 —
Pipelines—Centrifugal Cement Mortar Lining—General
16 B580 — —
Requirements
17 B584 1400 —
4200 Plain End Steel Tubes, Welded and Seamless—General
18 B633 1706 2081
Tables of Dimensions and Masses Per Unit Length
ANSI
5922 Malleable Cast Iron
7722 Aluminum Alloy Castings Produced by Gravity, Sand,
19 B36.10 3600 4200
20 B36.19 3600 4200
or Chill Casting, or by Related Processes—General Con-
21 Z540.1 5781 —
ditions for Inspection and Delivery
8179 Ductile Iron Pipes—External Zinc Coating
ANSI/AWWA
22 C151/A21.51 4772 2531, 4179, 8179
3. Terminology
23 C606–87 — —
3.1 Definitions:
3.1.1 fabricated fitting—a fitting constructed by welding
together sections of pipe or tube.
3.1.2 fitting—a device used in a piping system to change
BS 1490 Specification for Aluminum and Aluminum Alloy
pipe direction, size, split or combine flows, or adapt to other
Ingots and Castings for General Engineering Purposes
joining methods.
BS 1640 Pt. 1 Wrought Carbon and Ferritic Alloy Steel
Fittings 3.1.3 grooved end—type of fitting or pipe end having a
BS 1640 Pt. 2 Wrought and Cast Austenitic Chromium—
groove for use with grooved mechanical couplings (Type I) as
Nickel Steel Fittings defined in F1476.
BS 1706 Method for Specifying Electroplated Coatings of
3.1.4 pipe—hollow tubular product conforming to Table 1
Zinc and Cadmium on Iron and Steel
Specification Reference Nos. 19, 20, 22 and 13, Nominal
BS 2871 Specification for Copper and Copper Alloys—
Dimensions, or O.D. tube.
Tubes
3.1.5 plain end—type of fitting or pipe end for use with a
BS 3071 Specification for Nickel—Copper Alloy Castings
gasketed mechanical coupling (Type II) that is plain end as
BS 3100 Specification for Steel Castings for General Engi-
defined in Specification F1476.
neering Purposes
3.1.6 tangent—a section of straight pipe or tube integral to
BS 3600 Specification for Dimensions of Steel Pipe for the
or welded to the end(s) of a fitting.
Petroleum Industry
BS 3601 Specification for Carbon Steel Pipes and Tubes
3.1.7 wrought fitting—a fitting made by shaping or shaping
with Specified Room Temperature Properties for Pressure
and welding.
Purposes
4. Classification
BS 3605 Austenitic Stainless Steel Pipes and Tubes for
Pressure Purposes
4.1 These fittings are classified into the following design
BS 4772 Specification for Ductile Iron Pipes and Fittings
types:
BS 5781 Measurement and Calibration System
4.1.1 Type I—Grooved end.
BS 6681 Specification for Malleable Cast Iron
4.1.2 Type II—Plain end.
2.5 ISO Standards:
5. Ordering Information
209 Composition of Wrought Products of Aluminum and
Aluminum Alloys . . . Chemical Composition (Percent)
5.1 Orders for fittings under this specification shall include
the following:
5.1.1 Specification designation, title, number and year of
Available from International Organization for Standardization (ISO), ISO
issue.
Central Secretariat, BIBC II, Chemin de Blandonnet 8, CP 401, 1214 Vernier,
Geneva, Switzerland, ht
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM F1511-18(2023)(Specification)
Standard Specification for Mechanical Seals for Shipboard Pump Applications

ABSTRACT
This specification covers mechanical end-face seals for centrifugal and positive displacement pumps for shipboard use. Mechanical seals shall be classified by type, grade, and class. Types: type A - inside single mounted seals, type B - outside single mounted seals, type C - double seals, type D - tandem seals, type E - gas seal, and type F - special arrangement/applications vacuum or gas seal. Grades: grade 1 - basic end face seal, grade 2 - cartridge seal, and grade 3 - split seal. Classes: class 0 - nonsplit seal assembly, class 1 - partial split seal assembly, solid gland, class 2 - partial split seal assembly, split gland, class 3 - fully split seal assembly, solid gland, and class 4 - fully split seal assembly, split gland. Seal life shall be defined in terms of the time period in which the mechanical seal functions properly under its specified service.
SCOPE
1.1 This specification covers mechanical end-face seals for centrifugal and positive displacement pumps for shipboard use.  
1.2 The following types of seals are not included in this specification: lip seals, oil seals, circumferential seals, or labyrinth seals.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. A companion hard metric standard is in the process of preparation.  
1.4 Special requirements for U.S. Navy Shipboard Pump Applications are included in Supplement S1.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    26 pages
    English language
    sale 15% off
ASTM
ASTM F1030-86(2023)(Practice)
Standard Practice for Selection of Valve Operators

ABSTRACT
This practice provides guidance in the selection of manual and power-actuated valve operators. The selection criteria for manual valve operators apply to handwheels and tee-wrenches. The selection criteria for power-actuated valve operators, on the other hand, apply to stem nut and handwheel driven valve operators of the electric, pneumatic, and hydraulic types.
SCOPE
1.1 This practice provides guidance in the selection of manual and power-actuated valve operators.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM F1271-90(2023)(Specification)
Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications

ABSTRACT
This specification provides the minimum requirements for design, construction, performance, and testing of devices to prevent marine tank liquid overpressurization (hereafter called spill valves). Materials of construction shall be suitable for the service intended and resistant to the attack by the liquid carried in the tank being protected. Corrosion test, hydrostatic test, performance test, freeze test, vapor tightness test, seaworthiness test, and production test shall be performed to conform with the specified requirements.
SCOPE
1.1 This specification provides the minimum requirements for design, construction, performance, and testing of devices to prevent marine tank liquid overpressurization (hereafter called spill valves).  
1.2 The spill valves provided in accordance with this specification will satisfy Regulation 1I-2/59.1.6 of the 1981 and 1983 Amendments to the International Convention for the Safety of Life at Sea, 1974 (SOLAS), which states: “Provision shall be made to guard against liquid rising in the venting system to a height which would exceed the design head of the cargo tank. This shall be accomplished by high level alarms or overflow control systems or other equivalent means, together with gaging devices and cargo tank filling procedures.''  
1.3 The spill valves are not intended for the venting of vapors or the relief of vapor overpressurization or underpressurization of marine tanks.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 The following precautionary caveat pertains only to the test methods portion, Section 8, of this specification:  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM F1007-18(2022)(Specification)
Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application

ABSTRACT
This specification covers the design, manufacturing, and testing of packed slip-type expansion joints used in pipelines for accommodating axial thermal growth or contraction from the pipeline carrying fluid. The expansion joints shall be of the following types, styles, classes, and forms: Type I; Styles I and II; Classes I and II; and Forms I, II, and III. As specified in this specification and as required, the expansion joint shall be provided with flanged or welded end connections, limit stops, stuffing boxes with integral guides, base, drain connection, service connection, slip protectors, and adjustment rods. The internal and external surfaces of the expansion joint shall be cleaned of dirt, oil, grease, and other foreign material using a suitable cleaning solvent. Extreme care shall be used to ensure the interior is free of any slag, steel chips, or other similar materials that could lodge between the slip and the body and score the slip surface.
SCOPE
1.1 This specification covers the design, manufacturing, and testing of packed slip-type expansion joints used in pipelines for accommodating axial thermal growth or contraction from the pipeline carrying fluid.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM F1006-86(2022)(Specification)
Standard Specification for Entrainment Separators for Use in Marine Piping Applications

ABSTRACT
This specification covers the minimum requirements for the pressure-temperature rating, testing, and making of pressure-containing vessels for entrainment separators. Entrainment separators covered in this specification shall be designed according to the lowest pressure-temperature rating of any individual component, or as established by proof tests. Test water temperature and entrainment separator temperature must be at equilibrium before hydrostatic test pressure is applied. All possible air pockets must be purged while the entrainment separator vessel is being filled with water. External equipment not to be pressurized with the entrainment separator should be isolated or disconnected before applying the hydrostatic test pressure. Hydrostatic test pressure shall be applied gradually to the entrainment separator and held stationary at each increment for a sufficient time in order that a visual inspection can be made for leaks or deformation of the vessel.
SCOPE
1.1 This specification covers the minimum requirements for the pressure-temperature rating, testing, and making of pressure-containing vessels for entrainment separators.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 The following safety hazards caveat pertains only to the test methods portion, Section 6, of this specification:  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM F1020-86(2022)(Specification)
Standard Specification for Line-Blind Valves for Marine Applications

ABSTRACT
This specification provides the minimum requirements for design fabrication, pressure rating, and testing for line-blind valves. The materials for spectacle plates, bolting and body shall be determined. Each valve body shall be subjected to a hydrostatic test.
SCOPE
1.1 This specification provides the minimum requirements for design fabrication, pressure rating, and testing for line-blind valves.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 The following safety hazards caveat pertains only to the test methods portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM F986-86(2022)(Specification)
Standard Specification for Suction Strainer Boxes

ABSTRACT
This specification covers the design and material requirements as well as the construction strainer boxes used in ships' bilges and other tank locations requiring trash protection for suction pipes and pumps. Materials covered by this specification are Types 1 and 2 strainer boxes, which shall be manufactured free of defects, burrs, and sharp edges, and with dimensions conforming to the requirements specified. The strainer boxes shall be hot galvanized after fabrication.
SCOPE
1.1 This specification covers the design, materials, and construction of strainer boxes for use in ships’ bilges and other such tank locations that require trash protection for suction pipes and pumps.  
1.2 This specification covers pipe sizes from NPS 11/2 through NPS 16 (see Note 1).  
Note 1: The dimensionless designator NPS (nominal pipe size) has been substituted in this specification for such traditional terms as “nominal diameter,” “size,” and “nominal size.”  
1.3 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off
ASTM
ASTM F994-86(2022)(Specification)
Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections

ABSTRACT
This specification covers carbon steel overboard discharge hull penetrations for system piping. Penetrations shall be classified as follows: Type I; Type II (Class 1 and Class 2); Type III (Class 1 and Class 2); and Type IV (Classes 1, 2, and 3). Doubler and insert plates shall be of material with physical properties equal to or better than the reinforced shell plate. Overboard discharges shall be combined to the maximum extent practicable to minimize the number of shell penetrations. Overboard discharges shall be located to minimize recirculation into suction seachests. Shell penetrations shall be located outside of cathodic protection areas. Penetration pipe extension past the shell plate shall be equal to the pipe wall thickness.
SCOPE
1.1 This specification covers carbon steel overboard discharge hull penetrations for system piping of NPS 1 through NPS 24 (see Note 1).  
Note 1: The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such TRADITIONAL terms as nominal diameter, size, and nominal size.  
1.2 The minimum pipe schedule and reinforcement dimensions presented in Tables 1-6 are based on specifications in 46 CFR, 56.50-95, and Navy Design Data Sheet 100-1.        
1.3 This specification does not include sea chest penetrations.  
1.4 This specification does not include penetrations in protective plating.  
1.5 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
ASTM
ASTM F885-84(2022)(Specification)
Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS 14 to 2

ABSTRACT
This specification supplies the standard envelope dimensions for small bronze globe valves of nominal pipe sizes from NPS ¼ to 2 with threaded and brazed end connections installed in shipboard piping systems. The valves are in accordance with MSS-SP80, Class 200.
SCOPE
1.1 This specification provides standard dimensions for small bronze globe valves (NPS 1/4 to 2) installed in shipboard piping systems.  
1.2 This specification covers valves of a nominal pipe size from NPS 1/4 to 2 with threaded and brazed end connections. The valves are in accordance with MSS-SP80, Class 200.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM F993-21(Specification)
Standard Specification for Valve Locking Devices

ABSTRACT
This specification covers the application, design, and materials for valve locking devices. According to the method of locking, these devices are classified into three types: Type I using a wire rope assembly, Type II using a handwheel latch, and Type III using a locking shield. These devices are also grouped into three grades depending on material composition: Grade A is made of stainless steel, Grade B is made of anodized aluminum, and Grade C is made of carbon steel. Locking devices Types I and II described in this specification are designed to secure the valve in a fully opened or completely closed position. Materials to be used in the manufacture of Type I valve locking device shall consist of pipe clamp, ring link, common wire strand, tiller rope clamp, rigid eye spring hook, and sleeve. As for Type II valve locking device, the materials shall consist of modified pipe clamp, flat head rivet, single-acting quick release pin, lanyard, sleeve, lanyard clip, and lever arm. Type III devices shall consist of plate, single-acting quick release pin, lanyard, sleeve, lanyard clip, and lockbar. The locking device must be able to lock the valve in both the fully opened and completely closed positions.
SCOPE
1.1 This specification2 covers the application, design, and materials for valve locking devices.  
1.2 Locking devices Types I and II described in this specification are designed to secure the valve in a fully opened or completely closed position.  
1.3 This specification does not apply to valves equipped with locking devices from the valve manufacturer, unless this standard is invoked in the procurement ordering data for the valve or its locking device, or both.  
1.4 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off
  • Technical specification
    5 pages
    English language
    sale 15% off