ASTM D8-13
(Terminology)Standard Terminology Relating to Materials for Roads and Pavements
Standard Terminology Relating to Materials for Roads and Pavements
SCOPE
0
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D8 − 13
StandardTerminology Relating to
1
Materials for Roads and Pavements
This standard is issued under the fixed designation D8; the number immediately following the designation indicates the year of original
adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.Asuperscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
aggregate, n—a granular material of mineral composition such asphaltenes, n—insoluble materials that are precipitated by
as sand, gravel, shell, slag, or crushed stone, used with a use of selected solvents, such as n-heptane.
cementing medium to form mortars or concrete, or alone as DISCUSSION—The asphaltene fraction should be identified by the
solvent and solvent-asphalt ratio used.
in base courses, railroad ballasts, etc.
bank gravel, n—gravel found in natural deposits, usually more
anionic emulsion, n—a type of emulsion such that a particular
or less intermixed with fine material, such as sand or clay, or
emulsifying agent establishes a predominance of negative
combinations thereof; gravelly clay, gravelly sand, clayey
charges on the discontinuous phase.
gravel, and sandy gravel indicate the varying proportions of
asphalt, n—A dark brown to black cement-like residuum
the materials in the mixture.
obtained from the distillation of suitable crude oils.
DISCUSSION—The distillation processes may involve one or more of
bitumen, n—dark brown to black cement-like residuum ob-
the following: atmospheric distillation, vacuum distillation, steam
tained from the distillation of suitable crude oils.
distillation. Further processing of distillation residuum may be needed
DISCUSSION—The distillation processes may involve one or more of
to yield a material whose physical properties are suitable for commer-
the following: atmospheric distillation, vacuum distillation, steam
cial applications. These additional processes can involve air oxidation,
distillation. Further processing of distillation residuum may be needed
solvent stripping or blending of residua of different stiffness character-
to yield a material whose physical properties are suitable for commer-
istics. In Europe asphalt is called bitumen.
cial applications. These additional processes can involve air oxidation,
solvent stripping or blending of residua of different stiffness character-
asphalt binder, n—asphalt which may or may not contain an
istics. In North America bitumen is called asphalt.
asphalt modifier (see asphalt modifier).
DISCUSSION—this term is often used in the Performance Graded
bituminous, adj—containing or treated with bitumen (also
Binder system.
bituminized). Examples: bituminous concrete, bituminized
felts and fabrics, bituminous pavement.
asphalt cement, n—See asphalt
bituminous emulsion, n—(1) a suspension of minute globules
asphalt concrete, n—See asphalt mix.
of bituminous material in water or in an aqueous solution,
asphalt mix (asphalt mixture), n—a mixture of asphalt
(2) a suspension of minute globules of water or of an
binder, emulsified asphalt, or cutback asphalt and aggre-
aqueous solution in a liquid bituminous material.
gates. The mixture may also include other materials.
blast-furnace slag, n—the nonmetallic product, consisting
asphalt pavement,, n—a structure consisting of one or more
essentially of silicates and alumino-silicates of lime and of
prepared layers of asphalt mix atop one or more supporting
other bases, that is developed simultaneously with iron in a
layers of unbound, modified, or treated subgrade, subbase or
blast furnace.
base materials.
cationic emulsion, n—a type of emulsion such that a particular
asphalt-rubber, n—a blend of asphalt cement, reclaimed tire
emulsifying agent establishes a predominance of positive
rubber, and certain additives in which the rubber component
charges on the discontinuous phase.
is at least 15 % by weight of the total blend and has reacted
in the hot asphalt cement sufficiently to cause swelling of the
clinker, n—generally a fused or partly fused by-product of the
rubber particles.
combustion of coal, but also including lava and portland-
cement clinker, and partly vitrified slag and brick.
coal tar, n—a dark brown to black cementitious material
1
This terminology is under the jurisdiction of ASTM Committee D04 on Road
produced by the destructive distillation of bituminous coal.
and Paving Materials and is the direct responsibility of Subcommittee D04.91 on
Terminology.
coarse aggregate, n—(1) aggregate predominantly retained on
Current edition approved Feb. 1, 2013. Published February 2013. Originally
the 4.75-mm (No. 4) sieve: or (2) that portion of an
published as D 8 – 12. Last previous edition published 2012 as D8–12. DOI:
10.1520/D0008–13. aggregate retained on the 4.75-mm (No. 4) si
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: D8 − 12 D8 − 13
Standard Terminology Relating to
1
Materials for Roads and Pavements
This standard is issued under the fixed designation D8; the number immediately following the designation indicates the year of original
adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
aggregate, n—a granular material of mineral composition such as sand, gravel, shell, slag, or crushed stone, used with a cementing
medium to form mortars or concrete, or alone as in base courses, railroad ballasts, etc.
anionic emulsion, n—a type of emulsion such that a particular emulsifying agent establishes a predominance of negative charges
on the discontinuous phase.
asphalt, n—a subclass of bitumen which occurs in nature or is obtained in petroleum processing.A dark brown to black cement-like
residuum obtained from the distillation of suitable crude oils.
1
This terminology is under the jurisdiction of ASTM Committee D04 on Road and Paving Materials and is the direct responsibility of Subcommittee D04.91 on
Terminology.
Current edition approved July 1, 2012Feb. 1, 2013. Published September 2012February 2013. Originally published as D 8 – 12. Last previous edition D 8 – 94, which
waspublished 2012 as D8withdrawn in 2007 and reinstated in June, 2011. DOI: 10.1520/D0008–12.–12. DOI: 10.1520/D0008–13.
DISCUSSION—
The distillation processes may involve one or more of the following: atmospheric distillation, vacuum distillation, steam distillation. Further processing
of distillation residuum may be needed to yield a material whose physical properties are suitable for commercial applications. These additional
processes can involve air oxidation, solvent stripping or blending of residua of different stiffness characteristics. In Europe asphalt is called bitumen.
asphalt binder, n—an asphalt that isasphalt which may or may not contain an asphalt modifier (see produced from asphalt
modifierpetroleum residue either with or without the addition of non-particulate, non-fibrous modifiers.).
DISCUSSION—
this term is often used in the Performance Graded Binder system.
asphalt cement, n—See asphalt
asphalt concrete, n—See asphalt mix.
asphalt mix (asphalt mixture), n—a mixture of asphalt binder, emulsified asphalt, or cutback asphalt and aggregates. The mixture
may also include other materials.
asphalt modifier, n—Organic or inorganic materials added to an asphalt binder to alter the properties or behavior of the binder.
DISCUSSION—
Such materials include polymers, other chemical modifiers, rubber, and hydrated lime. With the exception of rubber, asphalt modifiers have a particle
size of 250 μm or smaller.
asphalt pavement,, n—a structure consisting of one or more prepared layers of asphalt mix resting on a subgrade.atop one or more
supporting layers of unbound, modified, or treated subgrade, subbase or base materials.
asphalt rock (rock asphalt), n—rock froma naturally occurring formation, usually limestone or sandstone, impregnated
throughout its mass with asphalt.
asphalt-rubber, n—a blend of asphalt cement, reclaimed tire rubber, and certain additives in which the rubber component is at
least 15 % by weight of the total blend and has reacted in the hot asphalt cement sufficiently to cause swelling of the rubber
particles.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
D8 − 13
asphaltenes, n—insoluble materials that are precipitated by use of selected solvents, such as n-heptane.
DISCUSSION—
The asphaltene fraction should be identified by the solvent and solvent-asphalt ratio used.
bank gravel, n—gravel found in natural deposits, usually more or less intermixed with fine material, such as sand or clay, or
combinations thereof; gravelly clay, gravelly sand, clayey gravel, and sandy gravel indicate the varying proportions of the
materials in the mixture.
bitumen, n—a class of black or dark-colored (solid, semisolid, or viscous) cementitious substances, natural or manufactured,
composed principally of high molecular weight hydrocarbons, of which asphalts, tars, and pitches are subclasses.dark brown to
black cement-like residuum obtained from the distillation of suitable crude oils.
DISCUSSION—
The distillation processes may involve one or more of the following: atmospheric distillation, vacuum distillation, steam distill
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.