EN ISO 21469:2006

Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006)

ISO 21469:2006 specifies hygiene requirements for the formulation, manufacture, use and handling of lubricants which, during manufacture and processing, can come into incidental contact (e.g. through heat transfer, load transmission, lubrication or the corrosion protection of machinery) with products and packaging used in the food, food-processing, cosmetics, pharmaceutical, tobacco or animal-feeding-stuffs industries. It is not applicable to substances used as product additives or to those in direct product contact, but confines itself to hygiene without addressing occupational health and safety matters.

Sicherheit von Maschinen - Schmierstoffe mit nicht vorhersehbarem Produktkontakt - Hygieneanforderungen (ISO 21469:2006)

Diese Internationale Norm legt Hygieneanforderungen für die Formulierung, Herstellung, Verwendung und den Umgang mit Schmierstoffen fest, die während der Herstellung sowie der Be- und Verarbeitung unvorhersehbar mit Produkten und Verpackungen in der Lebensmittel-, Kosmetik-, Arzneimittel-, Tabakwaren- oder Tierfutterindustrie in Kontakt kommen können, wie z. B. bei Vorgängen wie Wärme- oder Kraftübertragung, Schmierung oder Korrosionsschutz an Maschinen. Dieses Dokument umfasst auch Registrierungskriterien, die angewendet werden können, um die Übereinstimmung von Schmierstoffen mit nicht vorhersehbarem Produktkontakt mit dieser Internationalen Norm zu beurteilen (siehe Anhang B).
Dieses Dokument ist nicht anwendbar für Stoffe, die als Produktadditive verwendet werden, sowie solche, die im direkten Produktkontakt eingesetzt werden (siehe Anhang A), es beschränkt sich jedoch auf hygienebezogene Anforderungen und deckt keine Gesundheits- und Sicherheitsaspekte ab. Dennoch ist es von größter Wichtigkeit, neben den hygienebezogenen Anforderungen auch die mit den Prozessen verbundenen Gesundheits- und Sicherheitsaspekte zu berücksichtigen, um Maßnahmen zur Erfüllung beider Anforderungen ergreifen zu können.

Sécurité des machines - Lubrifiants en contact occasionnel avec des produits - Exigences relatives à l'hygiène (ISO 21469:2006)

L'ISO 21469:2006 spécifie les exigences relatives à l'hygiène applicables à la formulation, à la fabrication, à l'utilisation et à la manutention de lubrifiants qui, en cours de fabrication et de traitement, peuvent être en contact occasionnel (par exemple lors d'un transfert de chaleur, d'une transmission d'efforts, d'une lubrification ou de la protection contre la corrosion d'une machine) avec des produits et des emballages utilisés dans l'industrie alimentaire, ainsi que dans l'industrie des cosmétiques, des produits pharmaceutiques, du tabac et des produits d'alimentation pour animaux. Elle ne s'applique pas aux substances utilisées comme additifs, ni aux substances en contact direct avec le produit mais se limite aux exigences relatives à l'hygiène et exclut les questions liées à la santé et à la sécurité.

Varnost strojev – Maziva z nepredvidljivim stikom z izdelkom – Higienske zahteve (ISO 21469:2006)

General Information

• Status: Published
• Publication Date: 14-Feb-2006
• Withdrawal Date: 30-Aug-2006
• ICS: 13.110 - Safety of machinery
• ICS: 67.020 - Processes in the food industry
• Technical Committee: CEN/TC 114 - Safety of machinery
• Drafting Committee: CEN/TC 114 - Safety of machinery
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Feb-2006
• Completion Date: 15-Feb-2006
• Ref Project: SIST EN ISO 21469:2006 - Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 21469:2006
01-maj-2006
Varnost strojev – Maziva z nepredvidljivim stikom z izdelkom – Higienske zahteve
(ISO 21469:2006)
Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
(ISO 21469:2006)
Sicherheit von Maschinen - Schmierstoffe mit nicht vorhersehbarem Produktkontakt -
Hygieneanforderungen (ISO 21469:2006)
Sécurité des machines - Lubrifiants en contact occasionnel avec des produits -
Exigences relatives a l'hygiene (ISO 21469:2006)
Ta slovenski standard je istoveten z: EN ISO 21469:2006
ICS:
13.110 Varnost strojev Safety of machinery
67.250 Materiali in predmeti v stiku z Materials and articles in
živili contact with foodstuffs
75.100 Maziva Lubricants, industrial oils and
related products
SIST EN ISO 21469:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 21469:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 21469:2006
EUROPEAN STANDARD
EN ISO 21469
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2006
ICS 67.020; 13.110

English Version
Safety of machinery - Lubricants with incidental product contact -
Hygiene requirements (ISO 21469:2006)
Sécurité des machines - Lubrifiants en contact occasionnel Sicherheit von Maschinen - Schmierstoffe mit nicht
avec des produits - Exigences relatives à l'hygiène (ISO vorhersehbarem Produktkontakt - Hygieneanforderungen
21469:2006) (ISO 21469:2006)
This European Standard was approved by CEN on 6 February 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21469:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 21469:2006

EN ISO 21469:2006 (E)





Foreword


This document (EN ISO 21469:2006) has been prepared by Technical Committee ISO/TC 199
"Safety of machinery" in collaboration with Technical Committee CEN/TC 114 "Safety of
machinery", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2006, and conflicting national
standards shall be withdrawn at the latest by August 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 21469:2006 has been approved by CEN as EN ISO 21469:2006 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 21469:2006


INTERNATIONAL ISO
STANDARD 21469
First edition
2006-02-15

Safety of machinery — Lubricants with
incidental product contact — Hygiene
requirements
Sécurité des machines — Lubrifiants en contact occasionnel avec des
produits — Exigences relatives à l'hygiène




Reference number
ISO 21469:2006(E)
©
ISO 2006

---------------------- Page: 5 ----------------------

SIST EN ISO 21469:2006
ISO 21469:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central S
...