EN 1464:2010
(Main)Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method
Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method
This European Standard specifies a floating roller method for the determination of the peel resistance of adhesive bonds between one rigid adherend and one flexible adherend when tested under specified conditions of preparation and testing.
NOTE The use the floating roller produces more constant numerical data than other peel methods, but it should not be expected that the flexible adherend will conform to the surface of the roller.
Klebstoffe - Bestimmung des Schälwiderstandes von Klebungen - Rollenschälversuch
Diese Europäische Norm legt ein Rollenschälverfahren für die Bestimmung des Schälwiderstandes von Klebungen zwischen einem starren Fügeteil und einem flexiblen Fügeteil bei der Prüfung unter vorgeschrie-benen Vorbehandlungs und Prüfbedingungen fest.
ANMERKUNG Die Verwendung der Pendelrolle liefert gleichbleibendere Zahlenangaben als andere Verfahren, jedoch sollte nicht erwartet werden, dass sich das flexible Fügeteil an die Rollenoberfläche anpasst.
SICHERHEITSHINWEIS — Anwender dieser Norm sollten weitestgehend mit der üblichen Laborpraxis vertraut sein. Diese Norm beabsichtigt nicht, sämtliche mit deren Anwendung verbundenen Sicherheits-probleme, soweit solche gegeben sind, anzusprechen. Es liegt in der Verantwortung des Anwenders, geeignete Maßnahmen für Gesundheits und Arbeitsschutz einzuleiten und deren Übereinstimmung mit sämtlichen gesetzlichen Vorschriften sicherzustellen.
UMWELTSCHUTZHINWEIS — Es ist davon auszugehen, dass einige der in dieser Norm zugelassenen Materialien negative Auswirkungen auf die Umwelt haben können. Sobald der technologische Fortschritt zu akzeptablen Alternativen für diese Materialien führt, werden sie weitestgehend aus dieser Norm entfernt.
Am Ende der Prüfung sollte der Anwender der Norm dafür sorgen, dass Abfälle den örtlichen Bestimmungen entsprechend ordnungsgemäß entsorgt werden.
Adhésifs - Détermination de la résistance au pelage des assemblages - Méthode des galets mobiles
La présente Norme européenne spécifie une méthode faisant appel à des galets mobiles pour la détermination de la résistance au pelage des assemblages adhésifs réalisés entre un support rigide et un support flexible, dans des conditions définies de préparation et d’essai.
NOTE L’emploi de galets mobiles permet l’obtention de valeurs numériques plus constantes qu’avec d’autres méthodes de pelage, mais il convient d’admettre que le support flexible ne s’applique pas rigoureusement en tout point sur la surface du galet.
DÉCLARATION DE SÉCURITÉ – Il convient que les utilisateurs du présent document soient familiarisés avec les pratiques courantes de laboratoire, le cas échéant. Le présent document n’a pas pour but de traiter tous les problèmes de sécurité qui sont, le cas échéant, liés à son utilisation. Il incombe à l’utilisateur de la présente norme d’établir des pratiques appropriées en matière d’hygiène et de sécurité, et de s’assurer de la conformité à toutes les dispositions réglementaires.
DÉCLARATION ENVIRONNEMENTALE – Il est reconnu que certains des matériaux autorisés dans la présente norme peuvent avoir un impact négatif sur l’environnement. À mesure que les avancées technologiques mènent à d’autres solutions acceptables, ces matériaux seront autant que possible supprimés de la présente norme.
À la fin de l’essai, il convient que l’utilisateur de la norme prenne soin d’éliminer les déchets de façon appropriée, conformément à la réglementation locale.
Lepila - Določanje odpornosti proti odluščenju lepljenih stikov - Metoda s pomičnimi valji
Ta evropski standard določa metodo s pomičnimi valji za določanje odpornosti proti odluščenju lepljenih stikov med togim in mehkim lepljencem pri preskušanju pod posebnimi pogoji priprave in preskušanja. IZJAVA O VARNOSTI – Kjer je to primerno, morajo biti osebe, ki uporabljajo ta dokument, seznanjene z običajnimi laboratorijskimi praksami. Ta dokument nima namena obravnavati vseh varnostnih problemov, ki bi lahko bili povezani z njegovo uporabo. Odgovornost uporabnika je, da vzpostavi primerne varnostne in zdravstvene prakse in zagotovi skladnosti z vsemi regulativnimi pogoji. OKOLJSKA IZJAVA – Razume se, da lahko imajo nekateri materiali, ki jih dovoljuje ta standard, negativen učinek na okolje. Ko bo tehnološki napredek omogočil sprejemljive alternative za te materiale, bodo v največji mogoči meri izločeni iz tega standarda. Ob koncu preskusa mora uporabnik standarda poskrbeti, da odstrani odpadke na primeren način, v skladu z lokalnimi predpisi.
General Information
- Status
- Published
- Publication Date
- 09-Feb-2010
- Withdrawal Date
- 30-Aug-2010
- Technical Committee
- CEN/TC 193 - Adhesives
- Drafting Committee
- CEN/TC 193/WG 2 - Structural adhesives
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 15-Jul-2025
- Completion Date
- 23-Sep-2025
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 15-Feb-2010
- Effective Date
- 12-Dec-2009
Overview
EN 1464:2010 (CEN) specifies the floating roller method for determining the peel resistance of adhesive bonds between one rigid adherend and one flexible adherend. The standard defines test preparation, apparatus, specimen geometry, conditioning, test procedures (dry and wet), data reduction and reporting requirements. Results are expressed as average peel resistance in newtons per millimetre (N/mm).
Key Topics and Requirements
- Test method: Floating roller peel test producing more consistent numerical data than many other peel methods (note: the flexible adherend is not expected to fully conform to the roller).
- Apparatus:
- Constant-rate tensile testing machine (preferred crosshead rate: 100 ± 5 mm/min) with autographic recording and force measurement accuracy of ±1%.
- Peel test fixture with freely rolling 25 mm diameter rollers and dual roller bearings; fixture attaches to the testing machine cross-arm.
- Self-aligning grip engaging the outer 25 mm of the flexible adherend.
- Specimens:
- Preferred width: 25 mm (other widths allowed if stated).
- Flexible adherend thickness: 0.5 ± 0.02 mm.
- Rigid adherend thickness (metal): 2.5 ± 0.1 mm (can be thicker for other materials to reduce deformation).
- Minimum number of specimens: 5, unless specified otherwise by a material specification.
- Conditioning: Use standard laboratory atmospheres as per EN ISO 291.
- Procedure:
- Dry peel: peel continuously while recording force vs distance; disregard first 25 mm and last 25 mm; analyse at least 115 mm of peel.
- Wet peel: peel ~75 mm, apply water with a wetting agent (e.g., 0.5–1.0% detergent), then continue peeling.
- Data and evaluation:
- Determine average peel resistance (N/mm) from autographic curve using planimeter, gravimetric chart-area method, best-fit straight line, or computer-assisted methods.
- Record average, maximum and minimum forces and classify failure mode per EN ISO 10365.
- Reporting: Detailed test report requirements including adhesive and adherend identification, bond process, specimen details, conditioning, crosshead rate, calculation method and results.
Applications and Users
- Used by adhesive manufacturers, quality control and materials testing laboratories, R&D teams, and OEMs to:
- Compare peel performance of adhesives under standardized conditions.
- Validate adhesive selection for bonded assemblies involving a rigid and flexible component (e.g., metal‑to‑film laminates, tapes, labels).
- Support product specifications, quality assurance and failure analysis.
Related Standards
- EN 923:2005 (Adhesives - Terms and definitions)
- EN ISO 291 (Conditioning atmospheres)
- EN ISO 10365 (Designation of failure patterns)
- EN 1464:2010 supersedes EN 1464:1994 and EN 1967:2002
Keywords: EN 1464:2010, floating roller method, peel resistance, peel test, adhesives testing, peel strength, CEN.
Frequently Asked Questions
EN 1464:2010 is a standard published by the European Committee for Standardization (CEN). Its full title is "Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method". This standard covers: This European Standard specifies a floating roller method for the determination of the peel resistance of adhesive bonds between one rigid adherend and one flexible adherend when tested under specified conditions of preparation and testing. NOTE The use the floating roller produces more constant numerical data than other peel methods, but it should not be expected that the flexible adherend will conform to the surface of the roller.
This European Standard specifies a floating roller method for the determination of the peel resistance of adhesive bonds between one rigid adherend and one flexible adherend when tested under specified conditions of preparation and testing. NOTE The use the floating roller produces more constant numerical data than other peel methods, but it should not be expected that the flexible adherend will conform to the surface of the roller.
EN 1464:2010 is classified under the following ICS (International Classification for Standards) categories: 83.180 - Adhesives. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1464:2010 has the following relationships with other standards: It is inter standard links to EN 1464:1994, EN 1967:2002/AC:2005, EN 1967:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1464:2010 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/127. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 1464:2010 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Klebstoffe - Bestimmung des Schälwiderstandes von Klebungen - RollenschälversuchAdhésifs - Détermination de la résistance au pelage des assemblages - Méthode des galets mobilesAdhesives - Determination of peel resistance of adhesive bonds - Floating roller method83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 1464:2010SIST EN 1464:2010en,fr,de01-maj-2010SIST EN 1464:2010SLOVENSKI
STANDARDSIST EN 1967:2003/AC:2006SIST EN 1967:2003SIST EN 1464:19981DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1464
February 2010 ICS 83.180 Supersedes EN 1464:1994, EN 1967:2002English Version
Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method
Adhésifs - Détermination de la résistance au pelage des assemblages - Méthode des galets mobiles
Klebstoffe - Bestimmung des Schälwiderstandes von Klebungen - Rollenschälversuch This European Standard was approved by CEN on 28 December 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1464:2010: ESIST EN 1464:2010
NOTE It is expressed in newtons per millimetre of width (N/mm). 3.2 wet-peel resistance peel resistance after application of water containing a wetting agent SIST EN 1464:2010
...
La norme SIST EN 1464:2010 offre une approche rigoureuse pour la détermination de la résistance au décollement des joints adhésifs, utilisant la méthode du rouleau flottant. Son champ d'application est spécifiquement orienté vers les essais portant sur les liaisons entre un adhérent rigide et un adhérent flexible, dans des conditions de préparation et de test définies. L'un des points forts de cette norme réside dans sa capacité à produire des données numériques plus constantes que d'autres méthodes de peel, ce qui en fait un outil privilégié pour les fabricants et les chercheurs souhaitant évaluer la performance des adhésifs. En effet, la méthode du rouleau flottant permet d'obtenir des résultats précis, ce qui se traduit par une meilleure comparabilité des données entre différents tests. En outre, la norme apporte une pertinence significative dans le domaine des adhésifs, notamment dans des applications où la résistance au décollement est critique. Elle est d'une grande importance pour les industries impliquées dans le développement de nouveaux produits adhésifs et dans l'optimisation des processus de fabrication. Enfin, bien que l'usage du rouleau flottant garantisse une certaine uniformité des résultats, il est important de noter que l'adhérent flexible ne doit pas être censé épouser parfaitement la surface du rouleau. Cet aspect est essentiel à prendre en compte lors de l'interprétation des résultats des tests. En somme, la norme SIST EN 1464:2010 constitue un outil incontournable pour les acteurs du secteur des adhésifs, permettant de garantir la qualité et la fiabilité des produits développés.
Die Norm EN 1464:2010, die sich mit der Bestimmung des Abziehwiderstands von Adhäsionsverbindungen befasst, bietet eine umfassende Methodik zur Prüfung von Klebeverbindungen zwischen einem starren und einem flexiblen Trägermaterial. Die Verwendung der speziellen „Floating Roller“-Methode ist besonders hervorzuheben, da sie im Vergleich zu anderen Abziehverfahren stabilere und konsistentere numerische Daten liefert. Dies ist ein signifikanter Vorteil, da zuverlässige Testdaten für die Bewertung der Festigkeit von Klebeverbindungen in verschiedenen Anwendungen entscheidend sind. Die Reichweite dieser Norm ist klar umrissen, was eine zielgerichtete Anwendung in der Industrie ermöglicht. Durch die spezifischen Prüfbedingungen wird sichergestellt, dass die Ergebnisse reproduzierbar sind, was für Hersteller und Anwender von Klebstoffen von großer Bedeutung ist. Die Norm spricht somit die Bedürfnisse des Marktes an, insbesondere in Bereichen, in denen die Haftfestigkeit eine kritische Rolle spielt, wie zum Beispiel im Automobilbau oder in der Bauindustrie. Ein weiterer zentraler Punkt ist die klare Definition der Prüfbedingungen. Diese präzise Standardisierung trägt dazu bei, die Vergleichbarkeit von Testergebnissen zwischen verschiedenen Anbietern und Produkten zu garantieren. Während die Floating-Roller-Methode einen hohen Grad an Verlässlichkeit bietet, wird gleichwohl darauf hingewiesen, dass der flexible Träger nicht stets die Oberfläche des Rollers annehmen kann. Dieses Bewusstsein fördert eine realistische Erwartungshaltung bei den Anwendern und unterstützt eine informierte Auswahl von Materialien für spezifische Anwendungen. Somit ist die Norm EN 1464:2010 nicht nur relevant, sondern auch essenziell für die Weiterentwicklung und Qualitätssicherung in der Klebetechnologie. Ihre starken Punkte liegen in der speziellen Methodik, der klaren Definition von Prüfungskriterien und der Gewährleistung von konsistenten und verlässlichen Testergebnissen.
The EN 1464:2010 standard provides a comprehensive framework for assessing the peel resistance of adhesive bonds using the floating roller method. This method is particularly relevant for the evaluation of bonds that involve one rigid adherend and one flexible adherend. The scope of this standard is clearly defined, focusing on the conditions necessary for preparation and testing, which ensures consistency in results and applicability across various adhesive applications. One of the primary strengths of EN 1464:2010 is its established methodology that produces more consistent numerical data compared to other peel resistance testing methods. This makes the floating roller method a valuable tool for manufacturers and quality control specialists aiming for reliable assessments of adhesive performance. The emphasis on specified conditions enhances the reproducibility of results, allowing for better comparison across different tests and applications. The standard also addresses an important aspect of testing with flexible adherends, acknowledging that while the floating roller generates consistent data, it does not guarantee full conformity of the flexible adherend to the roller's surface. This insight is vital for users as it prompts them to consider the limitations of the method, thereby promoting more accurate interpretation of the results. In terms of relevance, EN 1464:2010 is crucial for industries reliant on adhesive technologies, including automotive, construction, and consumer products. It helps manufacturers ensure product safety and performance, aligning with industry requirements for high-quality adhesive applications. By standardizing the evaluation of peel resistance, this document supports continuous improvement in adhesive manufacturing, fostering innovation and competitiveness in the market. Overall, the EN 1464:2010 standard stands out as a key reference for professionals engaged in adhesive testing, offering a robust and methodical approach that enhances the reliability and validity of peel resistance evaluations.
SIST EN 1464:2010 표준은 접착제의 중요한 특성 중 하나인 접착 결합의 박리 저항을 평가하기 위한 체계적인 방법을 제시합니다. 이 표준의 주요 특징은 강체 접착면과 유연성 접착면 간의 결합을 검사하는 부유 롤러 방법(floating roller method)을 통해서 수행된다는 점입니다. 이는 정확하고 일관된 수치 데이터를 생성할 수 있도록 설계되어 있어, 박리 저항 측정에 있어 신뢰성을 높이는 장점이 있습니다. 이 표준의 범위는 특정 준비 및 테스트 조건 하에서 접착 결합의 박리 저항을 평가하는 것으로 제한되어 있으나, 이는 산업 및 연구 업계에서 다양한 종류의 접착제 성능을 비교하는 데 매우 유용합니다. 또한 부유 롤러 방식은 다른 박리 시험 방법보다 많은 장점을 제공하는데, 예를 들어 긴밀한 데이터 일관성을 유지하는 데 기여합니다. 특히, SIST EN 1464:2010은 다수의 응용 분야에서 사용될 수 있는 접착제의 특성을 평가하는 데 필수적이며, 접착제 제조업체 및 품질 관리 전문가에게 큰 도움이 됩니다. 이와 같은 표준은 접착제의 성능을 엔지니어링 및 제품 설계에 통합하는 데 중요한 역할을 하며, 결과적으로 구매자와 소비자에게 더 높은 품질의 제품을 제공할 수 있게 합니다. 따라서 SIST EN 1464:2010 표준은 접착제 산업에서의 박리 저항 측정에 있어 필수적인 기준으로 자리잡고 있으며, 관련 분야의 전문가들에게 그 중요성과 실용성이 큰 가치를 지닙니다. 이 표준은 앞으로도 접착 기술의 발전과 더불어 지속적으로 참고되어야 할 문서입니다.
SIST EN 1464:2010は、接着剤の接着接合部のピール抵抗を測定するための浮動ローラー法を規定したヨーロッパ標準です。この規格は、硬い支持体と柔らかい支持体の間の接着接合部の評価を行う際の準備および試験条件を明確に述べています。これにより、実際の応用において重要な接着接合部の性能を正確に測定することができます。 この標準の強みは、浮動ローラー方式を用いることで、他のピール試験方法よりもより一貫した数値データが得られる点です。この方法は、様々な材料や接着剤の特性に対しても信頼性の高い結果を提供します。また、柔らかい支持体がローラーの表面に完全に適合しないことを考慮する必要がありますが、それでも試験結果は実用的なシナリオに適したものとなります。 SIST EN 1464:2010は、接着剤業界における接着接合部の性能評価の標準化において非常に重要な役割を果たします。この規格に基づく試験は、製品の信頼性を高め、品質管理を向上させるための基礎として利用されるため、関連企業にとって必要不可欠な仕様となっています。このように、SIST EN 1464:2010は、接着剤の開発と評価における重要な基準であり、業界全体においてその関連性と有用性を示しています。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...