prEN ISO 9706
(Main)Information and documentation - Paper for documents - Requirements for permanence (ISO/DIS 9706:2024)
Information and documentation - Paper for documents - Requirements for permanence (ISO/DIS 9706:2024)
Specifies the requirements for permanent paper intended for documents given in terms of minimum strength measured by a tear test, minimum content of substance (such as calcium carbonate) that neutralize acid action measured by the alkali reserve, maximum content of easily oxidized material measured by the kappa number, maximum and minimum pH values of a cold water extract of the paper. Is applicable to unprinted papers. Is not applicable to boards.
Information und Dokumentation - Papier für Schriftgut und Druckerzeugnisse - Voraussetzungen für die Alterungsbeständigkeit (ISO/DIS 9706:2024)
Diese Internationale Norm beschreibt die Anforderungen an alterungsbeständiges Papier für Schriftgut und Druckerzeugnisse. Sie ist für unbedruckte Papiere anwendbar. Sie ist nicht für Pappen anwendbar.
ANMERKUNG 1 Die Begriffe „Papier“ und „Pappe“ sind in ISO 4046 3, „Paper, board, pulp and related terms — Vocabulary — Part 3: Paper-making terminology“ definiert.
ANMERKUNG 2 Weitere Informationen zu internationalen Normen über die Alterungsbeständigkeit von Papier (ISO 9706), über die Alterungsbeständigkeit und hohe mechanische Belastbarkeit von Papier für Dokumente (ISO 11108) sowie über die Stabilität von Papier für allgemeine, grafische Anwendungen (ISO 20494) können Anhang D entnommen werden.
Information et documentation - Papier pour documents - Exigences relatives à la permanence (ISO/DIS 9706:2024)
Informatika in dokumentacija - Papir za dokumente - Zahteve za trajnost (ISO/DIS 9706:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Informatika in dokumentacija - Papir za dokumente - Zahteve za trajnost (ISO/DIS
9706:2024)
Information and documentation - Paper for documents - Requirements for permanence
(ISO/DIS 9706:2024)
Information und Dokumentation - Papier für Schriftgut und Druckerzeugnisse -
Voraussetzungen für die Alterungsbeständigkeit (ISO/DIS 9706:2024)
Information et documentation - Papier pour documents - Exigences relatives à la
permanence (ISO/DIS 9706:2024)
Ta slovenski standard je istoveten z: prEN ISO 9706
ICS:
01.140.40 Založništvo Publishing
85.060 Papir, karton in lepenka Paper and board
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 9706
ISO/TC 46/SC 10
Information and documentation —
Secretariat: SIS
Paper for documents —
Voting begins on:
Requirements for permanence
2024-04-04
Information et documentation — Papier pour documents —
Voting terminates on:
Prescriptions pour la permanence
2024-06-27
ICS: 01.140.40; 85.060
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 9706:2024(en)
DRAFT
ISO/DIS 9706:2024(en)
International
Standard
ISO/DIS 9706
ISO/TC 46/SC 10
Information and documentation —
Secretariat: SIS
Paper for documents —
Voting begins on:
Requirements for permanence
Information et documentation — Papier pour documents —
Voting terminates on:
Prescriptions pour la permanence
ICS: 01.140.40; 85.060
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 9706:2024(en)
ii
ISO/DIS 9706:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Required characteristics . 3
5.1 General .3
5.2 Strength properties . .3
5.3 Alkali reserve.3
5.4 Resistance to oxidation .3
5.5 pH value of aqueous extract .3
6 Report . 3
7 Additional information . 4
Annex A (normative) Special instruction for determining the Kappa number . 5
Annex B (normative) Statement and symbol of compliance . 6
Annex C (informative) Notes on accelerated ageing tests and optical properties. 7
Annex D (informative) Relationship between paper permanence (ISO 9706), archival paper
permanence and durability (ISO 11108), and paper stability for general graphic
applications (ISO 20494) . 8
Bibliography .10
iii
ISO/DIS 9706:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 46, Information and documentation,
Subcommittee SC 10, Requirements for document storage and conditions for preservation, Working group WG7,
Requirements for materials related to preservation.
This second edition cancels and replaces the first edition (ISO 9706:1994).
The main changes are as follows:
— Modification of the Introduction and addition of an Annex to emphasize the relationship and differences
between existing standards on permanence, durability and stability of papers.
— Normative references updating.
— Modification of the term Document to use an existing definition in the terminology database of ISO.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO/DIS 9706:2024(en)
Introduction
Librarians and archivists have found that paper documents made as recently as the second half of the
th
20 century show serious deterioration under typical library and archive storage conditions. Contrary to
this observation, the past 1,500 years of paper use show that papers consisting mostly of cellulose have
considerable permanence and durability.
Research indicates that the deterioration is due to the presence of cellulose-degrading compounds in the
paper furnish and materials incorporated in the paper during manufacture, e.g. acidic materials such as
rosin-alum size.
The intention of ISO 9706 is to define a permanent paper that is most suitable for indefinite storage e.g. in
archives, libraries, and museums. Such paper is to be used for books as well as for files, documents and other
records that are to be stored permanently for legal, cultural policy or other reasons. For this purpose, this
document provides a method for specifying paper which, according to the present state of knowledge, has a
high degree of permanence. Paper fulfilling the requirement of this document shows no or only slight changes
in optical and mechanical properties which have an influence on readability of recording (printing, writing
or copying) and handling when stored for a long period in a protected environment. This purpose requires
papers eligible for permanent use to be free of oxidizable matter that causes undesirable discolouration
e.g. lignin or recycled material of uncertain composition, and/or substances that have a negative impact on
mechanical strength, for example any type of acid sizing or other acid-producing substances.
This document is based on a small number of quantitative tests for which limiting values have been specified.
Paper classified in accordance with this document shall show measurement results within the specified
limits for all prescribed tests.
The limits are chosen so that paper conforming to the specifications of this document can be produced in large
quantities at reasonable prices. This permits printing firms, publishing companies, public administration,
and others to use this paper for all types of written and printed matter, files and records, or publications
which for any reason are to be preserved indefinitely in libraries, archives or any other entities concerned in
this matter.
There are two standards, apart from ISO 9706, regarding either permanence, durability or stability of
papers:
— ISO 11108, Information and documentation - Archival paper - Requirements for permanence and durability
(permanent and durable paper), which describes archival paper with the same permanence requirements
as for ISO 9706 and with high durability (able to withstand the effects of wear and tear during use).
— ISO 20494 - Paper - Requirements for stability for general graphic applications (stable paper), which describes
paper for general graphic applications, not intended for permanent storage, including newspapers,
magazines, catalogues, books, office printouts and copies where changes in optical properties over time
can be tolerated.
The present ISO 9706 and ISO 11108 differ from ISO 20494; they are not comparable either in approach or in
method. In ISO 20494, the decrease in mechanical-physical strength that a paper suffe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.