Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing

This European Standard specifies definitions and requirements for non-structural elastic sealants used for sealing glazing in building construction applications.
It covers glazing joints from 7° horizontal. Main areas of application are:
-   glass to glass;
-   glass to frame;
-   glass to porous substrates.
Excluding aquariums, structural bonding/glazing, inner and outer seal to manufacture insulated glazing units, horizontal glazing (below 7°), organic glass (e.g. polycarbonate, PMMA, etc.).

Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 2: Fugendichtstoffe für Verglasungen

Diese Europäische Norm legt Definitionen für und Anforderungen an nicht tragende, elastische Fugendichtstoffe für die Abdichtung von Verglasungen im Hochbau fest.
Sie erfasst Verglasungsfugen ab einem Winkel von 7° zur Horizontalen. Die Hauptbereiche, in denen diese Fugendichtstoffe eingesetzt werden, sind:
-   Glas an Glas;
-   Glas an Rahmen;
-   Glas an porösen Trägermaterialien.
Anwendungen für Aquarien, tragende Verbindungen/Verglasungen, innere und äußere Abdichtungen von vorgefertigten Isolierglaseinheiten, horizontale Verglasungen (mit einer Neigung von weniger als 7°) und Verglasungen aus organischem Material (z. B. Polycarbonat, PMMA usw.) fallen nicht in den Anwendungsbereich dieser Europäischen Norm.

Mastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Partie 2 : Mastics pour vitrage

La présente Norme européenne spécifie des définitions et des exigences relatives aux mastics élastiques non structuraux utilisés pour le vitrage dans la construction immobilière.
Elle traite des joints pour vitrages au-delà de 7° par rapport à l'horizontale. Les principaux domaines d'application sont les suivants :
—   verre sur verre ;
—   verre sur châssis ;
—   verre sur supports poreux.
Sont exclus les aquariums, les vitrages extérieurs collés, les mastics de scellement des vitrages isolants, les vitrages horizontaux (jusqu'à 7°), le verre organique (par exemple, polycarbonate, PMMA, etc.).

Tesnilne mase za nekonstrukcijske stike v stavbah in na površinah za pešce - 2. del: Tesnilne mase za zasteklitev

Ta evropski standard določa definicije in zahteve za nekonstrukcijske elastične tesnilne mase, ki se uporabljajo za zasteklitev pri gradnji stavb.
Zajema stike zasteklitve od 7° vodoravno. Glavna področja uporabe so:
– steklo na steklo;
– steklo na ogrodje;
– steklo na porozno podlago.
Ne vključuje akvarijev, strukturnega spajanja/zasteklitve, notranjega in zunanjega tesnjenja za izdelovanje izoliranih zastekljenih enot, vodoravne zasteklitve (pod 7°), organskega stekla (npr. polikarbonat, PMMA itd.).

General Information

Status
Published
Publication Date
14-Feb-2017
Withdrawal Date
29-Nov-2018
Current Stage

Relations

Buy Standard

Standard
EN 15651-2:2017
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tesnilne mase za nekonstrukcijske stike v stavbah in na površinah za pešce - 2. del: Tesnilne mase za zasteklitevFugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 2: Fugendichtstoffe für VerglasungenMastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers - Partie 2 : Mastics pour vitrageSealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 15651-2:2017SIST EN 15651-2:2017en,fr,de01-april-2017SIST EN 15651-2:2017SLOVENSKI
STANDARDSIST EN 15651-2:20131DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15651-2
February
t r s y ICS
{ sä s r rä w r Supersedes EN
s w x w sæ tã t r s tEnglish Version
Sealants for nonæstructural use in joints in buildings and pedestrian walkways æ Part
tã Sealants for glazing Mastics pour joints pour des usages non structuraux dans les constructions immobilières et pour chemins piétonniers æ Partie
t ã Mastics pour vitrage
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen æ Teil
tã Fugendichtstoffe für Verglasungen This European Standard was approved by CEN on
t w December
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w x w sæ tã t r s y ESIST EN 15651-2:2017

European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 5 4 Requirements . 6 4.1 Identification requirements and test methods . 6 4.1.1 Short description of the sealant . 6 4.1.2 Thermogravimetric test. 6 4.1.3 Density . 6 4.1.4 Hardness (indentation) test (Shore Hardness) . 6 4.2 Conditioning, test procedure and substrates . 7 4.3 Performance requirements . 7 4.3.1 General . 7 4.3.2 Sealants for glazing elements in cold climates . 8 4.3.3 Resistance to flow . 9 4.3.4 Resistance to water and UV . 9 4.3.5 Resistance to compression . 9 4.4 Release of dangerous substances . 9 4.5 Reaction to fire . 10 4.5.1 General . 10 4.5.2 Mounting and fixing conditions for test samples . 10 5 Durability . 12 6 Sampling . 12 7 Assessment and verification of constancy of performance . 12 7.1 General . 12 7.2 Product type determination . 12 7.3 Factory production control . 12 8 Marking and labelling . 12 Annex A (informative)
Example on the frequency of tests for factory production control . 13 Annex ZA (informative)
Relationship of this European Standard with Regulation (EU) No.305/2011 . 14 ZA.1 Scope and relevant characteristics . 14 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 16 ZA.3 Assignment of AVCP tasks . 16 Bibliography . 19
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.