EN ISO 12402-6:2006
(Main)Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids - Safety requirements and additional test methods (ISO 12402-6:2006)
Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids - Safety requirements and additional test methods (ISO 12402-6:2006)
ISO 12402-6:2006 specifies the safety requirements and additional test methods for special purpose lifejackets and buoyancy aids (referred to as special purpose devices within ISO 12402-6:2006) in combination with the requirements specified in ISO 12402-2 to ISO 12402-5. It applies to special purpose devices for adults generally and for chidren younger than six years partially.
Persönliche Auftriebsmittel - Teil 6: Rettungswesten und Schwimmhilfen für besondere Einsatzzwecke - Sicherheitstechnische Anforderungen und zusätzliche Prüfverfahren (ISO 12402-6:2006)
Dieser Teil der ISO 12402 legt die sicherheitstechnischen Anforderungen und zusätzlichen Prüfverfahren für Rettungswesten und Schwimmhilfen für besondere Einsatzzwecke fest, die im Zusammenhang mit den in ISO 12402 2 bis ISO 12402 5 festgelegten Anforderungen gelten. Er gilt für Auftriebsmittel für besondere Einsatzzwecke für Erwachsene allgemein und für Kinder unter sechs Jahren teilweise.
Équipements individuels de flottabilité - Partie 6: Gilets de sauvetage et aides à la flottabilité pour usages spéciaux - Exigences de sécurité et méthodes d'essai complémentaires (ISO 12402-6:2006)
L'ISO 12402-6:2006 spécifie les exigences de sécurité et méthodes d'essai complémentaires relatives aux gilets de sauvetage et aux aides à la flottabilité pour usages spéciaux (désignés ci-après équipements à usages spéciaux) en conjonction avec les exigences spécifiées dans l'ISO 12402-2 à ISO 12402-5. Elle s'applique aux équipements à usages spéciaux généralement pour adultes et partiellement pour enfants de moins de six ans.
Osebni plavajoči pripomočki - 6. del: Rešilni jopiči za posebne namene in vzgonska pomagala - Varnostne zahteve in dodatne preskusne metode (ISO 12402-6:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2006
2VHEQLSODYDMRþLSULSRPRþNLGHO 5HãLOQLMRSLþL]DSRVHEQHQDPHQHLQ
Y]JRQVNDSRPDJDOD9DUQRVWQH]DKWHYHLQGRGDWQHSUHVNXVQHPHWRGH ,62
Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids -
Safety requirements and additional test methods (ISO 12402-6:2006)
Persönliche Auftriebsmittel - Teil 6: Rettungswesten und Schwimmhilfen für besondere
Einsatzzwecke - Sicherheitstechnische Anforderungen und zusätzliche Prüfverfahren
(ISO 12402-6:2006)
Équipements individuels de flottabilité - Partie 6: Gilets de sauvetage et aides a la
flottabilité pour usages spéciaux - Exigences de sécurité et méthodes d'essai
complémentaires (ISO 12402-6:2006)
Ta slovenski standard je istoveten z: EN ISO 12402-6:2006
ICS:
13.340.70 5HãLOQLMRSLþLY]JRQVND Lifejackets, buoyancy aids
SRPDJDODLQSODYDMRþL and floating devices
SULSRPRþNL
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 12402-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2006
ICS 13.340.70
English Version
Personal flotation devices - Part 6: Special purpose lifejackets
and buoyancy aids - Safety requirements and additional test
methods (ISO 12402-6:2006)
Équipements individuels de flottabilité - Partie 6: Gilets de Persönliche Auftriebsmittel - Teil 6: Rettungswesten und
sauvetage et aides à la flottabilité pour usages spéciaux - Schwimmhilfen für besondere Einsatzzwecke -
Exigences de sécurité et méthodes d'essai Sicherheitstechnische Anforderungen und zusätzliche
complémentaires (ISO 12402-6:2006) Prüfverfahren (ISO 12402-6:2006)
This European Standard was approved by CEN on 11 September 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12402-6:2006: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 12402-6:2006) has been prepared by Technical Committee ISO/TC 188
"Small craft" in collaboration with Technical Committee CEN/TC 162 "Protective clothing including
hand and arm protection and lifejackets", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2007, and conflicting national standards
shall be withdrawn at the latest by March 2007.
This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 12402-6:2006 has been approved by CEN as EN ISO 12402-6:2006 without any
modifications.
Annex ZA
(informative)
Relationship between this standard and the Essential
Requirements of EU Directive 89/686/EEC
This standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential
Requirements of the New Approach Directive 89/686/EEC on the approximation of the laws of the
Member States relating to personal protective equipment.
Once this standard is cited in the Official Journal of the European Communities under that Directive
and has been implemented as a national standard in at least one Member State, compliance with
the clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this
standard, a presumption of conformity with the corresponding Essential Requirements of that
Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this standard and Directive 89/686/EEC
Clause(s)/Sub- Essential Requirements (ERs) of Directive 89/686/EEC Qualifying
clause(s) of this remarks/Notes
Standard
4.1; 4.2 1.1.2.2 Classes of protection appropriate to different
levels of risk
5.2.3.2; 5.2.4.2; 5.3; 5.4 1.2.1 Absence of risks and other ‘inherent’ nuisance
factors
6; 7; 8 1.4 Information supplied by the manufacturer
5.1.3; 5.2.3.1 3.4 Prevention of drowing (lifejackets and lifesaving
suits)
WARNING - Other requirements and other EU Directives may be applicable to the products
falling within the scope of this standard.
INTERNATIONAL ISO
STANDARD 12402-6
First edition
2006-09-15
Personal flotation devices —
Part 6:
Special purpose lifejackets and buoyancy
aids — Safety requirements and
additional test methods
Équipements individuels de flottabilité —
Partie 6: Gilets de sauvetage et aides à la flottabilité pour usages
spéciaux — Exigences de sécurité et méthodes d'essai
complémentaires
Reference number
ISO 12402-6:2006(E)
©
ISO 2006
ISO 12402-6:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 12402-6:2006(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Classification. 3
4.1 Classes . 3
4.2 Performance levels. 4
5 Requirements . 5
5.1 General. 5
5.2 White-water sports devices . 7
5.3 PFDs for personal water craft, water skiing, or similar towed uses. 9
5.4 PFDs for fire fighting application . 10
6 Marking . 10
6.1 General. 10
6.2 Information on the special purpose device . 10
6.3 PFD used for commercial rafting in white water . 11
6.4 Identification and information . 11
7 Information supplied by the manufacturer . 12
8 Consumer information at point of sale. 12
8.1 General. 12
8.2 Plain text version . 12
8.3 Data list . 15
8.4 Pictograms . 16
8.5 Colour-code. 16
Bibliography . 17
ISO 12402-6:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12402-6 was prepared by European Committee for Standardization (CEN) Technical Committee
CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with
Technical Committee ISO/TC 188, Small craft, in accordance with the Agreement on technical cooperation
between ISO and CEN (Vienna Agreement).
ISO 12402 consists of the following parts, under the general title Personal flotation devices:
⎯ Part 1: Lifejackets for seagoing ships — Safety requirements
⎯ Part 2: Lifejackets, performance level 275 — Safety requirements
⎯ Part 3: Lifejackets, performance level 150 — Safety requirements
⎯ Part 4: Lifejackets, performance level 100 — Safety requirements
⎯ Part 5: Buoyancy aids (level 50) — Safety requirements
⎯ Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods
⎯ Part 7: Materials and components — Safety requirements and test methods
⎯ Part 8: Accessories — Safety requirements and test methods
⎯ Part 9: Test methods
⎯ Part 10: Selection and application of perso
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.