iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 14644-3:2005

(Main)

Cleanrooms and associated controlled environments - Part 3: Test methods (ISO 14644-3:2005)

Cleanrooms and associated controlled environments - Part 3: Test methods (ISO 14644-3:2005)

ISO 14644-3:2005 specifies test methods for designated classification of airborne particulate cleanliness and for characterizing the performance of cleanrooms and clean zones. Performance tests are specified for two types of cleanrooms and clean zones: those with unidirectional flow and those with non-unidirectional flow, in three possible occupancy states: as-built, at-rest and operational.
ISO 14644-3:2005 is not applicable to the measurement of products or of processes in cleanrooms or separative devices.

Reinräume und zugehörige Reinraumbereiche - Teil 3: Prüfverfahren (ISO 14644-3:2005)

Dieser Teil von ISO 14644 legt Prüfverfahren für die entsprechend bezeichnete Klassifikation der Reinheit von luftgetragenen Teilchen und zur Beschreibung der Leistung von Reinräumen und reinen Bereichen fest. Es werden Leistungsprüfungen für zwei Arten von Reinräumen und reinen Bereichen festgelegt, solche mit turbulenzarmer Strömung und solche mit turbulenter Strömung. Es werden drei Betriebszustände betrachtet: Bereitstellung, Leerlauf, Fertigung. Die Prüfverfahren empfehlen Prüfgeräte und Prüfverfahren zur Bestimmung von Kenngrößen für die Leistung. Wo das Prüfverfahren durch die Art des Reinraums oder reinen Bereichs beeinflusst wird, werden alternative Verfahren vorgeschlagen. Für einige Prüfungen werden mehrere unterschiedliche Verfahren und Geräte empfohlen, so dass verschiedenen Nutzungsarten Rechnung getragen werden kann. Soweit zwischen Kunden und Lieferanten vereinbart, dürfen auch alternative nicht in diesem Teil von ISO 14644 beschriebene Verfahren angewendet werden. Solche Verfahren liefern nicht zwingend gleichwertige Messungen.
Dieser Teil von ISO 14644 ist nicht auf die Messung von Produkten oder Prozessen in Reinräumen oder reinen Bereichen anwendbar.

Salles propres et environnements maîtrisés apparentés - Partie 3: Méthodes d'essai (ISO 14644-3:2005)

L'ISO 14644-3:2005 spécifie des méthodes d'essai pour la classification de la propreté particulaire de l'air et pour caractériser les performances des salles propres et des zones propres. Des essais de performance sont spécifiés pour deux types de salles propres et de zones propres: des essais mettant en oeuvre un écoulement soit unidirectionnel, soit non unidirectionnel et dans trois états possibles d'occupation: après construction, au repos et en activité.
L'ISO 14644-3:2005 ne s'applique pas au mesurage effectué sur des produits ou des procédés situés dans les salles propres ou dans les dispositifs séparatifs.

Čiste sobe in podobna nadzorovana okolja – 3. del: Preskusne metode (ISO 14644-3:2005)

General Information

Status
Withdrawn
Publication Date
14-Dec-2005
Withdrawal Date
15-Oct-2019
ICS
13.040.35 - Cleanrooms and associated controlled environments
Technical Committee
CEN/TC 243 - Cleanroom technology
Drafting Committee
CEN/TC 243 - Cleanroom technology
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
16-Oct-2019
Ref Project
SIST EN ISO 14644-3:2006 - Cleanrooms and associated controlled environments - Part 3: Test methods (ISO 14644-3:2005)

Relations

Replaced By
EN ISO 14644-3:2019 - Cleanrooms and associated controlled environments - Part 3: Test methods (ISO 14644-3:2019, Corrected version 2020-06)
Effective Date
23-Oct-2019

Buy Standard

EN ISO 14644-3:2006EN ISO 14644-3:2006
PreviousNext
Standard
EN ISO 14644-3:2006
English language
72 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14644-3:2006
01-september-2006
ýLVWHVREHLQSRGREQDQDG]RURYDQDRNROMD±GHO3UHVNXVQHPHWRGH ,62

Cleanrooms and associated controlled environments - Part 3: Test methods (ISO 14644-
3:2005)
Reinräume und zugehörige Reinraumbereiche - Teil 3: Prüfverfahren (ISO 14644-
3:2005)
Salles propres et environnements maîtrisés apparentés - Partie 3: Méthodes d'essai
(ISO 14644-3:2005)
Ta slovenski standard je istoveten z: EN ISO 14644-3:2005
ICS:
13.040.35 Brezprašni prostori in Cleanrooms and associated
povezana nadzorovana controlled environments
okolja
SIST EN ISO 14644-3:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14644-3:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 14644-3:2006
EUROPEAN STANDARD
EN ISO 14644-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 13.040.35

English Version
Cleanrooms and associated controlled environments - Part 3:
Test methods (ISO 14644-3:2005)
Salles propres et environnements maîtrisés apparentés - Reinräume und zugehörige Reinraumbereiche - Teil 3:
Partie 3: Méthodes d'essai (ISO 14644-3:2005) Prüfverfahren (ISO 14644-3:2005)
This European Standard was approved by CEN on 12 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14644-3:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14644-3:2006

EN ISO 14644-3:2005 (E)





Foreword


This document (EN ISO 14644-3:2005) has been prepared by Technical Committee ISO/TC 209
"Cleanrooms and associated controlled environments" in collaboration with Technical Committee
CEN/TC 243 "Cleanroom technology", the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2006, and conflicting national
standards shall be withdrawn at the latest by June 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 14644-3:2005 has been approved by CEN as EN ISO 14644-3:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14644-3:2006


INTERNATIONAL ISO
STANDARD 14644-3
First edition
2005-12-15


Cleanrooms and associated controlled
environments —
Part 3:
Test methods
Salles propres et environnements maîtrisés apparentés —
Partie 3: Méthodes d'essai





Reference number
ISO 14644-3:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 14644-3:2006
ISO 14644-3:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameter
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 14644-18:2023(Main)
Cleanrooms and associated controlled environments - Part 18: Assessment of suitability of consumables (ISO 14644-18:2023)
SIST EN ISO 14644-18:2023

N/A

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14644-4:2022(Main)
Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up (ISO 14644-4:2022)
SIST EN ISO 14644-4:2023

This document specifies the process for creating a cleanroom from requirements through to its design, construction and start-up. It applies to new, refurbished and modified cleanroom installations. It does not prescribe specific technological or contractual means of achieving these requirements. It is intended for use by users, specifiers, designers, purchasers, suppliers, builders and performance verifiers of cleanroom installations. The primary cleanliness consideration is airborne particle concentration. Detailed checklists are provided for the requirements, design, construction and start-up, which include important performance parameters to be considered. Energy management design approaches are identified to support an energy-efficient cleanroom design. Construction guidance is provided, including requirements for start-up and verification. A basic element of this document is consideration of aspects, including maintenance, that will help to ensure continued satisfactory operation for the entire life cycle of the cleanroom.
NOTE       Further guidance is given in Annexes A to D. ISO 14644-1, ISO 14644-2, ISO 14644-8, ISO 14644-9, ISO 14644-10, ISO 14644-12 and ISO 14644-17 provide complementary information. ISO 14644-7 offers guidance on design, construction and requirements for separative devices (clean air hoods, glove boxes, isolators and mini-environments).
The following subjects are mentioned but not addressed in this document:
—    specific operational activities, processes to be accommodated and process equipment in the cleanroom installation;
—    fire and safety regulations;
—    ongoing operation, cleaning and maintenance activities, which are covered by ISO 14644-5.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14644-8:2022(Main)
Cleanrooms and associated controlled environments - Part 8: Assessment of air cleanliness by chemical concentration (ACC) (ISO 14644-8:2022)
SIST EN ISO 14644-8:2022

This document establishes typical assessment processes to determine grading levels of air chemical cleanliness (ACC) in cleanrooms and associated controlled environments, in terms of airborne concentrations of specific chemical substances (individual, group or category), and provides a protocol to include test methods, analysis and time-weighted factors for their determination. This document currently considers only concentrations of air chemical contaminants between 100 g/m3 and 10−12 g/m3 under cleanroom operational conditions.
This document is not relevant for application in those industries, processes or productions where the presence of airborne chemical substances is not considered a risk to the product or process.
It is not the intention of this document to describe the nature of air chemical contaminants.
This document does not give a classification of surface chemical contamination.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14644-9:2022(Main)
Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022)
SIST EN ISO 14644-9:2022

This document establishes a procedure for the assessment of particle cleanliness levels on solid surfaces in cleanrooms and associated controlled environment applications. Recommendations on testing and measuring methods, as well as information about surface characteristics, are given in Annexes A to D.
This document applies to all solid surfaces in cleanrooms and associated controlled environments, such as walls, ceilings, floors, working environments, tools, equipment and products. The procedure for the assessment of surface cleanliness by particle concentration (SCP) is limited to particles of between 0,05 µm and 500 µm.
The following issues are not considered in this document:
—    requirements for the cleanliness and suitability of surfaces for specific processes;
—    procedures for the cleaning of surfaces;
—    material characteristics;
—    references to interactive bonding forces or generation processes that are usually time-dependent and process-dependent;
—    selection and use of statistical methods for assessment and testing;
—    other characteristics of particles, such as electrostatic charge, ionic charges and microbiological state.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14644-10:2022(Main)
Cleanrooms and associated controlled environments - Part 10: Assessment of surface cleanliness for chemical contamination (ISO 14644-10:2022)
SIST EN ISO 14644-10:2022

This document establishes appropriate testing processes to determine the cleanliness of surfaces in cleanrooms with regard to the presence of chemical compounds or elements (including molecules, ions, atoms and particles). This document is applicable to all solid surfaces in cleanrooms and associated controlled environments such as walls, ceilings, floors, worksurfaces, tools, equipment and devices.
NOTE 1    For the purpose of this document, consideration is only given to the chemical characteristics of a particle. The physical properties of the particle are not considered and this document does not cover the interaction between the contamination and the surface.
NOTE 2    This document does not include the contamination generation process or any time-dependent influences (e.g. deposition, sedimentation, ageing) or process-dependent activities such as transportation and handling. Neither does it include guidance on statistical quality-control techniques to ensure compliance.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14644-17:2021(Main)
Cleanrooms and associated controlled environments - Part 17: Particle deposition rate applications (ISO 14644-17:2021)
SIST EN ISO 14644-17:2021

This document gives direction on the interpretation and application of the results of the measurement of particle deposition rate on one or more vulnerable surfaces in a cleanroom as part of a contamination control programme. It provides some instructions on how to influence the particle deposition rate and reduce the risk of particle contamination on vulnerable surfaces.
This document gives information on how a cleanroom user can use the particle deposition rate measurements to determine limits that can be set for macroparticles on vulnerable surfaces. It also gives a risk assessment method by which an acceptable risk of deposition of particles onto vulnerable surfaces in a cleanroom can be established and, when this is not achieved, methods that can be used to reduce the particle deposition rate.
An alternative to the particle deposition rate is the particle obscuration rate which determines the rate of increase of coverage of particles onto an area of surface over time. The particle obscuration rate can be used in an analogous way to the particle deposition rate and the required particle obscuration rate for a specified surface can be calculated and the risk from deposited particles reduced.
This document does not:
—     provide a method to classify a cleanroom with respect to particle deposition rate or particle obscuration rate;
—     directly consider the deposition of microbe-carrying particles, although they can be treated as particles;
—     give any consideration to surface deposition by contact as, for example, when personnel touch a product and contamination is transferred.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17141:2020(Main)
Cleanrooms and associated controlled environments - Biocontamination control
SIST EN 17141:2020

This document establishes the requirements, recommendations and methodology for microbiological contamination control in clean controlled environments. It also sets out the requirements for establishing and demonstrating microbiological control in clean controlled environments.
This document is limited to viable microbiological contamination and excludes any considerations of endotoxin, prion and viral contamination.
There is specific guidance given on common applications, including Pharmaceutical and BioPharmaceutical, Medical Devices, Hospitals and Food.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14644-3:2019(Main)
Cleanrooms and associated controlled environments - Part 3: Test methods (ISO 14644-3:2019, Corrected version 2020-06)
SIST EN ISO 14644-3:2020

This document provides test methods in support of the operation for cleanrooms and clean zones to meet air cleanliness classification, other cleanliness attributes and related controlled conditions.
Performance tests are specified for two types of cleanrooms and clean zones: those with unidirectional airflow and those with non-unidirectional airflow, in three possible occupancy states: as-built, at-rest and operational.
The test methods, recommended test apparatus and test procedures for determining performance parameters are provided. Where the test method is affected by the type of cleanroom or clean zone, alternative procedures are suggested.
For some of the tests, several different methods and apparatus are recommended to accommodate different end-use considerations. Alternative methods not included in this document can be used by agreement between customer and supplier. Alternative methods do not necessarily provide equivalent measurements.
This document is not applicable to the measurement of products or of processes in cleanrooms, clean zones or separative devices.
NOTE       This document does not purport to address safety considerations associated with its use (for example, when using hazardous materials, operations and equipment). It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14644-16:2019(Main)
Cleanrooms and associated controlled environments - Part 16: Energy efficiency in cleanrooms and separative devices (ISO 14644-16:2019)
SIST EN ISO 14644-16:2019

This document gives guidance and recommendations for optimizing energy usage and maintaining energy efficiency in new and existing cleanrooms, clean zones and separative devices. It provides guidance for the design, construction, commissioning and operation of cleanrooms.
This document covers all cleanroom-specific features and can be used in different areas to optimize energy use in electronic, aerospace, nuclear, pharmaceutical, hospital, medical device, food industries and other clean air applications.
It also introduces the concept of benchmarking for the performance assessment and comparison of cleanroom energy efficiencies, while maintaining performance levels to ISO 14644 requirements[2][3].

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14644-15:2017(Main)
Cleanrooms and associated controlled environments - Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration (ISO 14644-15:2017)
SIST EN ISO 14644-15:2018

ISO 14644-15:2017 provides requirements and guidelines for assessing the chemical airborne cleanliness of equipment and materials which are foreseen to be used in cleanrooms and associated controlled environments which are linked to the ISO standard for cleanliness classes by chemical concentration (see ISO 14644‑8).
The following are outside the scope of ISO 14644-15:2017:
-      health and safety requirements;
-      compatibility with cleaning agents and techniques;
-      cleanability;
-      biocontamination;
-      specific requirements of equipment and materials for processes and products;
-      design details of equipment.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day