EN 13523-29:2010

Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)

This European Standard specifies a procedure for the comparative evaluation of resistance to soiling of an organic coating on a metallic substrate (coil coating) in an outdoor exposure environment, particularly the soiling defect known as "Tiger stripes".

Bandbeschichtete Metalle - Prüfverfahren - Teil 29: Beständigkeit gegen Verschmutzung (Schmutzaufnahme und Streifenbildung)

Diese Europäische Norm legt ein Verfahren zum vergleichenden Bewerten der Beständigkeit einer organischen Beschichtung auf einem metallischen Substrat (Bandbeschichtung) gegen Schmutzaufnahme in einer Umgebung im Außenbereich fest, insbesondere der Verschmutzung, die als „Tigerstreifen“ bekannt ist.

Tôles prélaquées - Méthodes d'essai - Partie 29 : Résistance à la pollution environnementale (salissures)

La présente Norme européenne prescrit un mode opératoire à appliquer pour déterminer, par comparaison, la
résistance à la pollution d’un revêtement organique appliqué sur un support métallique (prélaquage) dans un
environnement d’exposition à l’extérieur, en particulier la résistance au défaut appelé « zébrures ».

Kovine, prevlečene v svitkih - Metode preskušanja - 29. del: Odpornost proti onesnaženju iz okolja (zbiranje nesnage in priprava vzorcev)

Ta del EN 13523 določa postopek za primerjalno vrednotenje odpornosti proti onesnaženju organske prevleke na kovinskem substratu (prevleke v svitkih) pri izpostavljenosti zunanjemu okolju, predvsem onesnaženju, znanemu kot »tigrove proge«.

General Information

• Status: Withdrawn
• Publication Date: 23-Mar-2010
• Withdrawal Date: 07-Mar-2017
• ICS: 25.220.60 - Organic coatings
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139/WG 9 - Testing of coil coated metals
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 08-Mar-2017
• Ref Project: SIST EN 13523-29:2011 - Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)

Relations

• Replaced By: EN 13523-29:2017 - Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 29: Beständigkeit gegen Verschmutzung (Schmutzaufnahme und Streifenbildung)Tôles prélaquées - Méthodes d'essai - Partie 29 : Résistance à la pollution environnementale (salissures)Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)25.220.60Organske prevlekeOrganic coatings13.020.40Onesnaževanje, nadzor nad onesnaževanjem in ohranjanjePollution, pollution control and conservationICS:Ta slovenski standard je istoveten z:EN 13523-29:2010SIST EN 13523-29:2011en,fr,de01-november-2011SIST EN 13523-29:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-29
March 2010 ICS 25.220.60 English Version
Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
Tôles prélaquées - Méthodes d'essai - Partie 29 : Résistance à la pollution environnementale (salissures)
Bandbeschichtete Metalle - Prüfverfahren - Teil 29: Beständigkeit gegen Verschmutzung (Schmutzaufnahme und Streifenbildung) This European Standard was approved by CEN on 20 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13523-29:2010: ESIST EN 13523-29:2011
...