prEN 9147

Aerospace series - Management of unsalvageable Items

This document is applicable to all items used for manufacturing, maintenance, and repair of aviation, space, and defense products from the raw material to the final product (e.g. aircraft, structural items, constituent assemblies, standard parts, consumables with conformity and/or safety impact).
This document considers items dispositioned as scrap in accordance with 8.7 of the EN 9100 series of standards supporting nonconformity management and/or organization decisions (e.g. obsolescence, inventory management, missing traceability documentation).
The requirements specified in this document are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this document and applicable statutory or regulatory requirements, the applicable statutory or regulatory requirements take precedence.
This document defines requirements and actions to be taken after the disposition decision to control the unsalvageable items within the organization and its external providers.

Luft- und Raumfahrt - Management nichtverwendbarer Gegenstände

Série aérospatiale - Gestion des éléments irrécupérables

La présente norme européenne s'applique à tous les éléments servant à la fabrication, à la maintenance et à la réparation de produits des secteurs de l'aéronautique, de l'espace et de la défense, de la matière première au produit final (par exemple : aéronefs, éléments de structure, ensembles de constituants, pièces normalisées, consommables ayant un impact sur la conformité et/ou la sécurité).
La présente norme européenne considère les éléments éliminés comme étant mis au rebut au sens du paragraphe 8.7 des normes de la série EN 9100, au service de la gestion des non-conformités et/ou des décisions d'organisation (par exemple : obsolescence, gestion des stocks, absence de documents de traçabilité).
Les exigences spécifiées dans la présente norme européenne viennent compléter (sans les remplacer) les exigences contractuelles, statutaires et réglementaires applicables. En cas de conflit entre les exigences de la présente norme européenne et les exigences statutaires ou réglementaires applicables, ce sont ces dernières qui doivent prévaloir.
La présente norme européenne définit les exigences et les actions à mettre en oeuvre après la décision d'élimination afin de maîtriser les éléments irrécupérables au sein de l'organisme et chez ses fournisseurs externes.

Aeronavtika - Ravnanje z nepopravljivimi predmeti

General Information

• Status: Not Published
• ICS: 49.020 - Aircraft and space vehicles in general
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 6/S 1 - EAQG European Aerospace Quality Group
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Due Date: 25-Nov-2021
• Completion Date: 25-Nov-2021
• Ref Project: oSIST prEN 9147:2018 - Aerospace series - Management of unsalvageable Items

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 9147:2018
01-november-2018
Aeronavtika - Ravnanje z nepopravljivimi predmeti
Aerospace series - Management of unsalvageable Items
Luft- und Raumfahrt - Management nichtverwendbarer Gegenstände
Série aérospatiale - Gestion des éléments irrécupérables
Ta slovenski standard je istoveten z: prEN 9147
ICS:
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
oSIST prEN 9147:2018 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 9147:2018
---------------------- Page: 2 ----------------------
oSIST prEN 9147:2018
DRAFT
EUROPEAN STANDARD
prEN 9147
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2018
ICS 49.020
English Version
Aerospace series - Management of unsalvageable Items

Série aérospatiale - Gestion des éléments Luft- und Raumfahrt - Management nichtverwendbarer

irrécupérables Gegenstände

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-

STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 9147:2018 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 9147:2018
prEN 9147:2018 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 4

4 Requirements ................................................................................................................................................... 5

4.1 General requirements ................................................................................................................................... 5

4.2 Unsalvageable item management program requirements .............................................................. 5

4.3 Scrapping options ........................................................................................................................................... 6

Annex A (informative) Unsalvageable items management flowchart ......................................................... 8

Bibliography .................................................................................................................................................................... 9

---------------------- Page: 4 ----------------------
oSIST prEN 9147:2018
prEN 9147:2018 (E)
European foreword

This document (prEN 9147:2018) has been prepared by the Aerospace and Defence Industries

Association of Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.

The International Aerospace Quality Group (IAQG), with representatives from companies in the

Americas, Asia/Pacific, and Europe, benchmarked industry best practices and guidance to develop the

requirements of unsalvageable items management. The key objectives of this European standard are to

prevent unsalvageable items to be used for manufacturing, maintenance, or repair of aviation, space,

and defense products, and to specify the conditions of their reclassifications.

This European standard is complementary to the EN 9100 series of standards (i.e. EN 9100, EN 9110

and EN 9120) requirements associated to the control of nonconforming products.
Rationale:

This document standardizes unsalvageable item management program requirements to the greatest

extent possible and can be used at all levels of the supply chain by organizations around the world to

mitigate the risk to use unsalvageable items within aviation, space, and defense products to improve

and ensure the performance, reliability, and safety of these products.
This document provides the following potential benefits:
— standardizes unsalvageable management program requirements;
— integrates aviation, space, and defense industry best practices and guidance;
— increases product quality and safety;
— achieves cost savings due to unsalvageable item reclassifications;
— reduces waste/environmental footprint by fostering reclassification;

— protects companies’ intellectual property by preventing reverse engineering on the scrapped items.

---------------------- Page: 5 ----------------------
oSIST prEN 9147:2018
prEN 9147:2018 (E)
1 Scope

This document is applicable to all items used for manufacturing, maintenance, and repair of aviation,

space, and defense products from the raw material to the final product (e.g. aircraft, structural items,

constituent assemblies, standard parts, consumables with conformity and/or safety impact).

This document considers items dispositioned as scrap in accordance with 8.7 of the EN 9100 series of

standards supporting nonconformity management and/or organization decisions (e.g. obsolescence,

inventory management, missing traceability documentation).

The requirements specified in this document are complementary (not alternative) to contractual and

applicable statutory and regulatory requirements. Should there be a conflict between the requirements

of this document and applicable statutory or regulatory requirements, the applicable statutory or

regulatory requirements take precedence.

This document defines requirements and actions to be taken after the disposition decision to control

the unsalvageable items within the organization and its external providers.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of
...