EN ISO 4254-6:2020
(Main)Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)
Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)
This document, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed and self-propelled agricultural sprayers for use with plant protection products (PPP) and liquid fertilizer application, as placed on the market by the manufacturer and designed for a single operator only. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this document are different from those which are stated in ISO 4254-1, the requirements of this document take precedence over the requirements of ISO 4254-1 for machines that have been designed and built according to the provisions of this document.
This document, taken together with ISO 4254-1, deals with significant hazards, hazardous situations and events relevant to sprayers and liquid fertilizer distributors when they are used as intended and under the conditions foreseeable by the manufacturer (see Annex A), excepting the hazards arising from:
— protection of the driver against spray when spraying (see Foreword);
— automatically actuated height adjustment systems;
— the environment, other than noise;
— moving parts for power transmission except strength requirements for guards and barriers.
This document is not applicable to sprayers and liquid fertilizer distributors which are manufactured before the date of publication of this document.
Landmaschinen - Sicherheit - Teil 6: Pflanzenschutzgeräte (ISO 4254-6:2020)
Dieses Dokument, das zusammen mit ISO 4254 1 anzuwenden ist, legt die sicherheitstechnischen Anforderungen und deren Überprüfung für die Gestaltung und Konstruktion von angebauten, aufgesattelten, gezogenen und selbstfahrenden landwirtschaftlichen Pflanzenschutzgeräten zur Ausbringung von Pflanzenschutzmitteln (PPP, en: Plant Protection Products) und flüssigen Düngemitteln fest, die vom Hersteller auf den Markt gebracht werden und die für nur eine Bedienungsperson bestimmt sind. Zusätzlich legt dieses Dokument fest, welche Informationen zu sicheren Arbeitsweisen (einschließlich Restrisiken) vom Hersteller zur Verfügung zu stellen sind.
Wenn die in diesem Dokument festgelegten Anforderungen von den Anforderungen in ISO 4254 1 abweichen, haben im Falle von Maschinen, die entsprechend den Festlegungen dieses Dokuments konstruiert und gebaut wurden, die Anforderungen dieses Dokuments Vorrang vor den Festlegungen in ISO 4254 1.
Dieses Dokument behandelt zusammen mit ISO 4254 1 die signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die für Pflanzenschutzgeräte und Geräte zum Ausbringen von flüssigen Düngemitteln, die bestimmungsgemäß und unter den vom Hersteller vorgesehenen Bedingungen eingesetzt werden, relevant sind (siehe Anhang A), mit der Ausnahme von Gefährdungen durch:
- den Schutz des Fahrers vor Sprühnebel während des Spritz- und Sprühvorganges (siehe Vorwort);
- automatisch funktionierende Systeme zur Höheneinstellung;
- die Umwelt, mit Ausnahme von Geräuschen;
- bewegliche Teile der Kraftübertragung, mit Ausnahme der Festigkeitsanforderungen an trennende Schutzeinrichtungen und Abweisbügel.
Dieses Dokument gilt nicht für Pflanzenschutzgeräte und Geräte zum Ausbringen von flüssigen Düngemitteln, die vor dem Datum der Veröffentlichung dieses Dokuments hergestellt wurden.
Matériel agricole - Sécurité - Partie 6 : Pulvérisateurs et distributeurs d’engrais liquides (ISO 4254-6:2020)
Le présent document, à utiliser conjointement avec l'ISO 4254-1, spécifie les exigences de sécurité et leur vérification pour la conception et la construction de pulvérisateurs agricoles portés, semi-portés, traînés et automoteurs destinés à appliquer des produits de protection des plantes et des engrais liquides, à leur mise en marché par le constructeur et conçus pour un seul opérateur. En outre, elle spécifie le type d'informations que le fabricant doit fournir sur les pratiques d'utilisation sûre (y compris les risques résiduels).
Lorsque des exigences du présent document diffèrent de celles de l'ISO 4254-1, les exigences du présent document prennent le pas sur les exigences de l'ISO 4254-1 pour les machines conçues et fabriquées conformément aux exigences du présent document.
Le présent document, pris avec l'ISO 4254-1, traite de tous les phénomènes dangereux, situations dangereuses et événements dangereux significatifs relatifs aux pulvérisateurs et distributeurs d'engrais liquides, lorsqu'ils sont utilisés normalement et dans les conditions prévisibles par le fabricant (voir l'Annexe A), à l'exception des phénomènes dangereux provenant:
— de la protection du conducteur contre le produit lors de sa pulvérisation (voir l'Avant-propos);
— des systèmes de contrôle automatique de la hauteur;
— de l'environnement, autres que le bruit;
— des éléments mobiles de transmission de puissance, à l'exception des exigences de résistance des protecteurs et barres d'éloignement.
Le présent document ne s'applique pas aux pulvérisateurs et aux distributeurs d'engrais liquides qui ont été fabriqués avant la date de publication du présent document.
Kmetijski stroji - Varnost - 6. del: Škropilnice in naprave za razdeljevanje tekočih gnojil (ISO 4254-6:2020)
Ta dokument, ki se uporablja skupaj s standardom ISO 4254-1, določa varnostne zahteve in njihovo
preverjanje za načrtovanje in izdelavo priklopnih, polpriklopnih, vlečenih in samognanih
kmetijskih škropilnic za uporabo z izdelki za zaščito rastlin (PPP) in za aplikacije tekočih gnojil,
kakršne da na tržišče proizvajalec in ki so zasnovane za enega upravljavca. Poleg tega
določa tudi vrsto informacij o varnih delovnih praksah (vključno z ostalimi tveganji), ki jih mora zagotoviti
proizvajalec.
Če se zahteve tega dokumenta razlikujejo od zahtev, navedenih v standardu ISO 4254-1,
imajo zahteve tega dokumenta prednost pred zahtevami standarda ISO 4254-1 za stroje, ki
so zasnovani in izdelani v skladu z določbami tega dokumenta.
Ta dokument skupaj s standardom ISO 4254-1 obravnava večja tveganja, nevarne situacije
in dogodke, ki se navezujejo na škropilnice in naprave za razdeljevanje tekočih gnojil, kadar se uporabljajo v skladu z njihovim namenom in
pod pogoji, ki jih določa proizvajalec (glej dodatek A), razen tveganj, povezanih s/z:
– zaščito voznika pred škropivom med škropljenjem (glej predgovor);
– sistemi za nastavitev višine, ki se aktivirajo samodejno;
– okoljem (razen hrupa);
– premikajočimi se deli menjalnika (razen zahtev glede trdnosti ščitnikov in pregrad).
Ta dokument se ne uporablja za škropilnike in naprave za razdeljevanje tekočih gnojil, izdelane
pred datumom njegove objave.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4254-6:2020
01-julij-2020
Nadomešča:
SIST EN ISO 4254-6:2010
SIST EN ISO 4254-6:2010/AC:2011
Kmetijski stroji - Varnost - 6. del: Škropilnice in naprave za razdeljevanje tekočih
gnojil (ISO 4254-6:2020)
Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO
4254-6:2020)
Landmaschinen - Sicherheit - Teil 6: Pflanzenschutzgeräte (ISO 4254-6:2020)
Matériel agricole - Sécurité - Partie 6: Pulvérisateurs et distributeurs d'engrais liquides
(ISO 4254-6:2020)
Ta slovenski standard je istoveten z: EN ISO 4254-6:2020
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
SIST EN ISO 4254-6:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4254-6:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2020
EUROPÄISCHE NORM
ICS 65.060.40 Supersedes EN ISO 4254-6:2009
English Version
Agricultural machinery - Safety - Part 6: Sprayers and
liquid fertilizer distributors (ISO 4254-6:2020)
Matériel agricole - Sécurité - Partie 6: Pulvérisateurs et Landmaschinen - Sicherheit - Teil 6:
distributeurs d'engrais liquides (ISO 4254-6:2020) Pflanzenschutzgeräte (ISO 4254-6:2020)
This European Standard was approved by CEN on 16 February 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4254-6:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC aimed to be covered . 5
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
European foreword
This document (EN ISO 4254-6:2020) has been prepared by Technical Committee ISO/TC 23 "Tractors
and machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144
“Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2020, and conflicting national standards
shall be withdrawn at the latest by May 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4254-6:2009.
The main changes compared to the previous edition are as follows:
— some excluded hazards have been deleted from the scope as they are covered by ISO 4254-1 or this
revised edition;
— the general (stability) requirements have been deleted as they are covered by ISO 4254-1;
— the protection of the operator against hazardous substances in case of front mounted booms has
been removed as this risk is relevant to all types of sprayers but appropriate requirements (in form
of an international reference standard) are not yet available; however, the protection of the driver
against spray when spraying is dealt with by the harmonized European standard EN 15695
(Agricultural tractors and self-prope
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.