EN ISO 13408-1:2011
(Main)Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008)
Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008)
ISO 13408-1:2008 specifies the general requirements for, and offers guidance on, processes, programmes and procedures for development, validation and routine control of the manufacturing process for aseptically-processed health care products.
ISO 13408-1:2008 includes requirements and guidance relative to the overall topic of aseptic processing. Specific requirements and guidance on various specialized processes and methods related to filtration, lyophilization, clean-in place (CIP) technologies, sterilization in place (SIP) and isolator systems are given in other parts of ISO 13408.
Aseptische Herstellung von Produkten für die Gesundheitsfürsorge - Teil 1: Allgemeine Anforderungen (ISO 13408-1:2008)
1.1 Der vorliegende Teil von ISO 13408 legt die allgemeinen Anforderungen an Verfahren, Programme und Verfahrensweisen zur Entwicklung, Validierung und Routinekontrolle des Herstellungsverfahrens für aseptisch hergestellte Produkte für die Gesundheitsfürsorge fest und stellt einen Leitfaden dafür zur Verfügung. 1.2 Der vorliegende Teil von ISO 13408 umfasst Anforderungen und einen Leitfaden in Bezug auf das Gesamtthema der aseptischen Herstellung. Besondere Anforderungen und ein Leitfaden für verschiedene spezielle Prozesse und Verfahren in Bezug auf Filtration, Lyophilisierung, Technologien der Reinigung vor Ort (en: cleaning in place, CIP), Sterilisation vor Ort (en: sterilization in place, SIP) und Isolatorsysteme sind in anderen Teilen von ISO 13408 angeführt. ANMERKUNG Der vorliegende Teil von ISO 13408 ersetzt keine nationalen behördlichen Anforderungen, wie z. B. Gute Herstellungspraktiken (GMP) und/oder Anforderungen von Arzneibüchern, die insbesondere nationale oder regionale Zuständigkeiten betreffen.
Traitement aseptique des produits de santé - Partie 1: Exigences générales (ISO 13408-1:2008)
L'ISO 13408-1:2008 spécifie des exigences générales et propose des directives en matière de méthodes, de programmes et de modes opératoires pour le développement, la validation et le contrôle de produits de santé soumis à un traitement aseptique.
L'ISO 13408-1:2008 comprend des exigences et des directives relatives au domaine général du traitement aseptique. Des exigences et des directives spécifiques sur les divers procédés et méthodes spécialisés de filtration, de lyophilisation, de nettoyage in situ, de stérilisation in situ et de systèmes isolateurs sont indiquées dans les différentes parties de l'ISO 13408.
Aseptična proizvodnja izdelkov za zdravstveno nego - 1. del: Splošne zahteve (ISO 13408-1:2008)
Ta del ISO 13408 določa splošne zahteve in ponuja smernice za procese, programe in postopke za razvoj, validacijo in rutinsko kontrolo proizvodnega procesa za aseptično proizvedene izdelke za zdravstveno nego. Ta del ISO 13408 vključuje zahteve in smernice, ki se nanašajo na celovito temo aseptične proizvodnje. Določene zahteve in smernice za različne specializirane procese in metode, povezane s filtracijo, liofilizacijo, tehnologijami čiščenja na mestu proizvodnje (CIP), sterilizacijo na mestu proizvodnje (SIP) in sistemom izolatorjev, so podane v drugih delih ISO 13408.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2011
1DGRPHãþD
SIST EN 13824:2005
$VHSWLþQDSURL]YRGQMDL]GHONRY]D]GUDYVWYHQRQHJRGHO 6SORãQH]DKWHYH ,62
Aseptic processing of health care products - Part 1: General requirements (ISO 13408-
1:2008)
Aseptische Herstellung von Produkten für die Gesundheitsfürsorge - Teil 1: Allgemeine
Anforderungen (ISO 13408-1:2008)
Traitement aseptique des produits de santé - Partie 1: Exigences générales (ISO 13408-
1:2008)
Ta slovenski standard je istoveten z: EN ISO 13408-1:2011
ICS:
11.080.01 Sterilizacija in dezinfekcija na Sterilization and disinfection
splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 13408-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2011
ICS 11.080.01 Supersedes EN 13824:2004
English Version
Aseptic processing of health care products - Part 1: General
requirements (ISO 13408-1:2008)
Traitement aseptique des produits de santé - Partie 1: Aseptische Herstellung von Produkten für die
Exigences générales (ISO 13408-1:2008) Gesundheitsfürsorge - Teil 1: Allgemeine Anforderungen
(ISO 13408-1:2008)
This European Standard was approved by CEN on 10 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13408-1:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 90/385/EEC on Active Implantable Medical Devices .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 93/42/EEC on Medical Devices .5
Annex ZC (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/79/EC on in vitro diagnostic medical devices .6
Foreword
The text of ISO 13408-1:2008 has been prepared by Technical Committee ISO/TC 198 “Sterilization of health
care products” of the International Organization for Standardization (ISO) and has been taken over as
of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn
at the latest by December 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13824:2004.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directives.
For relationship with EU Directives, see informative Annexes ZA, ZB, or ZC, which are integral parts of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 13408-1:2008 has been approved by CEN as a EN ISO 13408-1:2011 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 90/385/EEC on Active Implantable Medical
Devices
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 90/385/EEC on active implantable medical devices.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the clauses of this
standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 90/385/EEC
Clauses of this EN Essential Requirements (ERs) of Qualifying remarks/Notes
Directive 90/385/EEC
4,5,6,7,8,9,10,11,12 7 This relevant Essential Requirement is
only partly addressed in this European
Standard
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this Standard.
Annex ZB
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 93/42/EEC on Medical Devices
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 93/42/EEC on medical devices.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the clauses of this
standard given in Table ZB.1 confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZB.1 — Correspondence between this European Standard and Directive 93/42/EEC
Clauses of this EN Essential Requirements (ERs) of Qualifying remarks/Notes
Directive 93/42/EEC
4,5,6,7,8,9,10,11,12 8.3 This relevant Essential Requirement is
only partly addressed in this European
Standard
4,5,6,7,8,9,10,11,12 8.4
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this Standard.
Annex ZC
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 98/79/EC on in vitro diagnostic medical
devices
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 98/79/EC on in vitro diagnostic medical devices.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the clauses of this
standard given in Table ZC.1 confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZC.1 — Correspondence between this European Standard and Directive 98/79/EC
Clauses of this EN Essential Requirements (ERs) of Qualifying remarks/Notes
Directive 98/79/EC
4,5,6,7,8,9,10,11,12 B.2.3 This relevant Essential Requirement is
only partly addressed in this European
Standard
4,5,6,7,8,9,10,11,12 B.2.4
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this Standard.
INTERNATIONAL ISO
STANDARD 13408-1
Second edition
2008-06-15
Aseptic processing of health care
products —
Part 1:
General requirements
Traitement aseptique des produits de santé —
Partie 1: Exigences générales
Reference number
ISO 13408-1:2008(E)
©
ISO 2008
ISO 13408-1:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
ISO 13408-1:2008(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Quality system elements. 7
4.1 General. 7
4.2 Assignment of responsibilities . 7
4.3 Calibration . 7
5 Aseptic process definition. 8
5.1 General. 8
5.2 Risk management . 8
6 Manufacturing environment . 10
6.1 General. 10
6.2 Manufacturing environment design. 11
6.3 Layout . 12
6.4 Material and personnel flow . 14
6.5 HVAC system . 15
6.6 Cleanroom qualification. 17
6.7 Utility services and ancillary equipment .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.