prEN 4530-004

Aerospace series - Sealing sleeves used in elements of connection - Part 004: Sealing sleeves for external diameter cable 3 mm to 5,8 mm - Product standard

This document specifies the required characteristics and test applicable to sealing sleeves used in elements of connection according to EN 3155 002 and EN 4530 002.

Luft- und Raumfahrt - Dichtungshülse zur Verwendung in Verbindungselementen - Teil 004: Dichtungshülse für Leitungen mit einem Aussendurchmesser von 3 mm bis 5,8 mm - Produktnorm

Série aérospatiale - Manchons d'étanchéité utilisés dans les organes de connexion - Partie 004 : Manchons d'étanchéité pour câbles de diamètre extérieur 3 mm à 5,8 mm - Norme de produit

Le présent document spécifie les caractéristiques requises et les essais applicables aux manchons d’étanchéité utilisés dans les organes de connexion selon l’EN 3155 002 et l’EN 4530 002.

Aeronavtika - Tesnilne puše za uporabo v veznih elementih - 004. del: Tesnilne puše za kable z zunanjim premerom od 3 mm do 5,8 mm - Standard za proizvod

General Information

• Status: Not Published
• Publication Date: 11-Nov-2024
• ICS: 49.035 - Components for aerospace construction
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 03-Aug-2023
• Completion Date: 03-Aug-2023
• Ref Project: oSIST prEN 4530-004:2023 - Aerospace series - Sealing sleeves used in elements of connection - Part 004: Sealing sleeves for external diameter cable 3 mm to 5,8 mm - Product standard

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4530-004:2023
01-julij-2023
Aeronavtika - Tesnilne puše za uporabo v veznih elementih - 004. del: Tesnilne
puše za kable z zunanjim premerom od 3 mm do 5,8 mm - Standard za proizvod
Aerospace series - Sealing sleeves used in elements of connection - Part 004: Sealing
sleeves for external diameter cable 3 mm to 5,8 mm - Product standard
Luft- und Raumfahrt - Dichtungshülse zur Verwendung in Verbindungselementen - Teil
004: Dichtungshülse für Leitungen mit einem Aussendurchmesser von 3 mm bis 5,8 mm
- Produktnorm
Série aérospatiale - Manchons d'étanchéité utilisés dans les organes de connexion -
Partie 004 : Manchons d'étanchéité pour câbles de diamètre extérieur 3 mm à 5,8 mm -
Norme de produit
Ta slovenski standard je istoveten z: prEN 4530-004
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4530-004:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4530-004:2023

---------------------- Page: 2 ----------------------
oSIST prEN 4530-004:2023


DRAFT
EUROPEAN STANDARD
prEN 4530-004
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2023
ICS 49.060
English Version

Aerospace series - Sealing sleeves used in elements of
connection - Part 004: Sealing sleeves for external
diameter cable 3 mm to 5,8 mm - Product standard
Série aérospatiale - Manchons d'etanchéité utilisés Luft- und Raumfahrt - Dichtungshülse zur Verwendung
dans les elements de connection - Partie 004: Manchon in Verbindungselementen - Teil 004: Dichtungshülse
d'etancheité pour des diametres exterieur de cables de für Leitungen mit einem Aussendurchmesser von 3
3 mm à 5.8 mm - Produit standard mm bis 5,8 mm - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4530-004:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4530-004:2023
prEN 4530-004:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
4.1 Specific characteristics . 5
4.2 Dimensions and mass . 5
4.3 Material .
...