EN 1396:2007

Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications

This European Standard specifies the particular requirements for wrought aluminium and wrought aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 3,0 mm.
It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process, either in the final width or slit afterwards, and to sheet obtained from such strip.
It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.

Aluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für allgemeine Anwendungen - Spezifikationen

Diese Europäische Norm legt die besonderen Anforderungen an bandbeschichtete Bleche und Bänder aus Aluminium und Aluminiumlegierungen für allgemeine Anwendungen fest. Diese Erzeugnisse werden üblicher¬weise in Dicken bis 3,0 mm geliefert.
Sie gilt für kaltgewalzte Bänder aus Aluminium und Aluminiumlegierungen, die durch ein Band¬beschichtungs¬verfahren beschichtet werden, in Endbreite oder nach der Beschichtung längsgeteilt werden, bzw. für Bleche, die aus diesen Bändern hergestellt werden.
Sie gilt nicht für Sonderanwendungen dieser bandbeschichteten Bleche und Bänder wie beispielsweise Dosen, Verschlüsse und Deckel, die in EN 541 behandelt werden.

Aluminium et alliages d'aluminium - Tôles et bandes revêtues en bobine pour applications générales - Spécifications

Ce document spécifie les exigences particulières relatives aux tôles et bandes en aluminium et alliages d'aluminium corroyés prérevêtues en bobine pour applications générales. Le produit est généralement fourni en épaisseur allant jusqu'à 3,0 mm.
Elle s'applique aux bandes en aluminium et alliages d'aluminium laminées à froid, prérevêtues en largeur finale par le procédé de revêtement en bobine ou refendues après revêtement, ainsi qu'aux tôles obtenues à partir de ces bandes.
Elle ne s'applique pas aux tôles et bandes prérevêtues en bobines et utilisées pour des applications particulières tels que les produits laminés pour boîtes, capsules rigides et couvercles, qui font l'objet de l'EN 541.

Aluminij in aluminijeve zlitine - Prevlečena ali premazana pločevina in trakovi za splošno uporabo - Specifikacije

General Information

• Status: Withdrawn
• Publication Date: 23-Jan-2007
• Withdrawal Date: 31-Mar-2015
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 7 - Sheets, strips and plates
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-Apr-2015
• Ref Project: SIST EN 1396:2007 - Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications

Relations

• Replaces: EN 1396:1996 - Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
• Effective Date: 22-Dec-2008
• Replaced By: EN 1396:2015 - Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
• Effective Date: 08-Apr-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - SpecificationsAluminium et alliages d'aluminium - Tôles revetues en bobine pour applications générales - SpécificationsAluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für allgemeine Anwendungen - SpezifikationenTa slovenski standard je istoveten z:EN 1396:2007SIST EN 1396:2007en77.150.10Aluminijski izdelkiAluminium productsICS:SIST EN 1396:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 1396:200701-april-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1396January 2007ICS 77.150.10Supersedes EN 1396:1996
English VersionAluminium and aluminium alloys - Coil coated sheet and strip forgeneral applications - SpecificationsAluminium et alliages d'aluminium - Tôles revêtues enbobine pour applications générales - SpécificationsAluminium und Aluminiumlegierungen - BandbeschichteteBleche und Bänder für allgemeine Anwendungen -SpezifikationenThis European Standard was approved by CEN on 7 December 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1396:2007: E



EN 1396:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Technical conditions for inspection and delivery.7 4.1 Ordering information.7 4.2 Requirements.10 4.3 Test procedures.11 5 Mechanical properties.12 6 Organic coating properties.14 6.1 Tolerances on thickness.14 6.2 Tolerances on gloss.15 6.3 Tolerances on colour.16 7 Inspection documents.16 8 Marking.16 9 Packing.
...