EN ISO 13628-1:2005/prA2

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations - Amendment 2: Revised Annex L (ISO 13628-1:2005/DAM 2:2008)

2009-11-13 EMA: WI deleted at ISO.

Erdöl- und Erdgasindustrie - Auslegung und Betrieb von Unterwasser-Produktionssystemen - Teil 1: Allgemeine Anforderungen und Empfehlungen (ISO 13628-1:2005/DAM 2:2008)

Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 1: Exigences générales et recommandations - Amendement 2: Ajout de l'Annexe L (ISO 13628-1:2005/DAM 2:2008)

Industrija za predelavo nafte in zemeljskega plina - Načrtovanje in upravljanje proizvodnje v podmorskih sistemih - 1. del: Splošne zahteve in priporočila - Dopolnilo 2: Popravljen dodatek L (ISO 13628-1:2005/DAM 2:2008)

General Information

• Status: Not Published
• Publication Date: 04-Oct-2010
• Withdrawal Date: 04-Apr-2011
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 4098 - Decision to abandon - Enquiry
• Start Date: 12-Nov-2009
• Completion Date: 12-Nov-2009
• Ref Project: SIST EN ISO 13628-1:2006/oprA2:2009 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations - Amendment 2: Revised Annex L (ISO 13628-1:2005/DAM 2:2008)

Relations

• Amends: EN ISO 13628-1:2005 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:2005)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13628-1:2006/oprA2:2008
01-februar-2008
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD1DþUWRYDQMHLQXSUDYOMDQMH
SURL]YRGQMHYSRGPRUVNLKVLVWHPLKGHO6SORãQH]DKWHYHLQSULSRURþLOD
'RSROQLOR3RSUDYOMHQGRGDWHN/,62'$0
Petroleum and natural gas industries - Design and operation of subsea production
systems - Part 1: General requirements and recommendations - Amendment 2: Revised
Annex L (ISO 13628-1:2005/DAM 2:2007)
Industries du pétrole et du gaz naturel - Conception et exploitation des systemes de
production immergés - Partie 1: Exigences générales et recommandations -
Amendement 2: Révision de l'Annexe L (ISO 13628-1:2005/DAM 2:2007)
Ta slovenski standard je istoveten z: EN ISO 13628-1:2005/prA2
ICS:
75.180.10
SIST EN ISO 13628-1:2006/oprA2:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
DRAFT
EN ISO 13628-1:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA2
November 2007
ICS 75.180.10
English Version
Petroleum and natural gas industries - Design and operation of
subsea production systems - Part 1: General requirements and
recommendations - Amendment 2: Revised Annex L (ISO
13628-1:2005/DAM 2:2007)
Industries du pétrole et du gaz naturel - Conception et
exploitation des systèmes de production immergés - Partie
1: Exigences générales et recommandations -
Amendement 2: Révision de l'Annexe L (ISO 13628-
1:2005/DAM 2:2007)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 12.
This draft amendment A2, if approved, will modify the European Standard EN ISO 13628-1:2005. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13628-1:2005/prA2:2007: E
worldwide for CEN national Members.

Contents Page
Foreword.3

Foreword
This document (EN ISO 13628-1:2005/prA2:2007) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in collaboration with
Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries” the secretariat of which is held by AFNOR.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO/DAM 13628-1:2005 has been approved by CEN as a EN ISO 13628-1:2005/prA2:2007
without any modification.
DRAFT AMENDMENT ISO 13628-1:2005/DAmd 2
ISO/TC 67/SC 4 Secretariat: ANSI
Voting begins on: Voting terminates on:
2007-11-01 2008-04-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Petroleum and natural gas industries — Design and operation of
subsea production systems —
Part 1:
General requirements and recommendations
AMENDMENT 2: Revised Annex L
Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés —
Partie 1: Exigences générales et recommandations
AMENDEMENT 2: Révision de l’Annexe L
ICS 75.180.10
ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2007

ISO 13628-1:2005/DAmd 2
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2007 – All rights reserved

ISO 13628-1:2005/CD Amd 2
Contents Page
Foreword .iv
Annex L (informative) Materials and welding of manifold piping and jumpers .5
L.1 General.5
L.2 Material standards and testing requirements.5
L.2.1 General.5
L.2.2 Pipe and pipe-fittings.5
L.2.3 Forged components.7
L.2.4 Chemical composition and weldability.7
L.2.5 Test sampling of base materials.8
L.2.6 Mechanical and corrosion testing of base materials .8
L.2.7 Non-destructive inspection of components.10
L.3 Bolting and gasket materials .11
L.4 Bending and other forming operations .12
L.4.1 General.12
L.4.2 Cold forming.12
L.4.3 Hot induction bending.12
L.5 Overlay welding and buttering of components .14
L.5.1 General.14
L.5.2 Corrosion resistant overlay.14
L.5.3 Weld buttering.14
L.6 Welding and non-destructive testing of piping systems .15
L.6.1 Welding qualification requirements.15
L.7 Inspection and non-destructive testing of welds (NDT).21
L.8 Repair.22

ISO 13628-1:2005/CD Amd 2
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to ISO 136281-1:2005 was prepared by Technical Committee ISO/TC 67, Materials, equipment
and offshore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 4, Drilling
and production equipment.
iv © ISO 2007 – All rights reserved

ISO 13628-1:2005/CD Amd 2
Petroleum and natural gas industries — Design and operation
of subsea production systems —
Part 1:
General requirements and recommendations
AMENDMENT 2: Revised Annex L
Page 1, Clause 2, add the following normative references
ISO 3183, Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions
Pipes of requirement class C
ISO 3834, Quality requirements for fusion welding of metallic materials — Part 2: Comprehensive quality
requirements
ISO 9606, Approval testing of welders — Fusion welding
ISO 9712, Non-destructive testing — Qualification and certification of personnel
ISO 10423, Specification for wellhead and christmas tree equipment
ISO 10474, Metallic products — Types of inspection documents
ISO 15156, Petroleum and natural gas industries — Materials for use in H S-containing enviro
...