EN 4058:2001

Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm < = D < = 5,0 mm - Dimensions

This standard specifies the dimensions and tolerances of:
Filler rods and filler wires for welding
in titanium and titanium alloys
Diameter 0,5 mm * D * 5,0 mm
for aerospace applications.

Luft- und Raumfahrt - Schweißzusatzstäbe und -drähte aus Titan und Titanlegierungen - Durchmesser 0,5 mm # D # 5,0 mm - Maße

Diese Norm legt die Maße und Toleranzen von:
Schweißzusatzstäben und -drähten
aus Titan und Titanlegierungen
Durchmesser 0,5 mm = D = 5,0 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Baguettes et fils d'apport de soudage en titane et alliages de titane - Diamètres 0,5 mm < = D < = 5,0 mm - Dimensions

Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm < = D < = 5,0 mm - Dimensions

General Information

• Status: Published
• Publication Date: 18-Sep-2001
• Withdrawal Date: 30-Mar-2002
• ICS: 49.025.30 - Titanium
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 4058:2002 - Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm < = D < = 5,0 mm - Dimensions

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm < = D < = 5,0 mm - DimensionsLuft- und Raumfahrt - Schweißzusatzstäbe und -drähte aus Titan und Titanlegierungen - Durchmesser 0,5 mm # D # 5,0 mm - MaßeSérie aérospatiale - Baguettes et fils d'apport de soudage en titane et alliages de titane - Diametres 0,5 mm < =
D < =
5,0 mm - DimensionsAerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm < =
D < =
5,0 mm - Dimensions49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 4058:2001SIST EN 4058:2002en01-januar-2002SIST EN 4058:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4058September 2001ICS 49.025.30English versionAerospace series - Filler rods and filler wires for welding intitanium and titanium alloys - Diameter 0,5 mm
D
5,0 mm -DimensionsSérie aérospatiale - Baguettes et fils d'apport de soudageen titane et alliages de titane - Diamètres 0,5 mm
D
5,0mm - DimensionsLuft- und Raumfahrt - Schweißzusatzstäbe und -drähte ausTitan und Titanlegierungen - Durchmesser 0,5 mm
D 5,0 mm - MaßeThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4058:2001 ESIST EN 4058:2002
...