Dentistry - Trephine burs (ISO 20569:2018)

This document specifies requirements and their test methods for trephine burs used in dentistry especially for oral implantology procedures such as collecting bone and/or removing an implant. It also specifies requirements for their marking and labelling.

Zahnheilkunde - Trepanbohrer (ISO 20569:2018)

Dieses Dokument legt die Anforderungen und Prüfverfahren für Trephinbohrer fest, die in der Zahnheilkunde überwiegend für orale Implantologieverfahren verwendet werden, wie zur Knochen-entnahme und/oder zur Entfernung von Implantaten. Es legt außerdem die Anforderungen an deren Kennzeichnung und Etikettierung fest.

Medecine bucco-dentaire - Fraises-trépans (ISO 20569:2018)

Le présent document spécifie les exigences et méthodes d'essai des fraises‐trépans employées dans la médecine bucco‐dentaire, en particulier dans le cadre de procédures d'implantologie buccale telles que les prélèvements osseux et/ou le retrait d'un implant. Il spécifie également les exigences applicables au marquage et à l'étiquetage de ces instruments.

Zobozdravstvo - Svedri za trepaniranje (ISO 20569:2018)

Ta mednarodni standard določa zahteve in povezane preskusne metode za svedre za trepaniranje, ki se v zobozdravstvu uporabljajo zlasti pri postopkih oralne kirurške vsaditve, na primer pri zbiranju kosti in odstranjevanju poškodovanih vsadkov. Določa tudi zahteve za označevanje in etiketiranje.

General Information

Status
Published
Publication Date
23-Oct-2018
Withdrawal Date
29-Apr-2019
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
24-Oct-2018
Due Date
05-Feb-2018
Completion Date
24-Oct-2018

Buy Standard

Standard
EN ISO 20569:2018
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2018
Zobozdravstvo - Svedri za trepaniranje (ISO 20569:2018)
Dentistry - Trephine burs (ISO 20569:2018)
Zahnheilkunde - Trephinbohrer (ISO 20569:2018)
Medecine bucco-dentaire - Fraises-trépans (ISO 20569:2018)
Ta slovenski standard je istoveten z: EN ISO 20569:2018
ICS:
11.060.20 =RERWHKQLþQDRSUHPD Dental equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 20569
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2018
EUROPÄISCHE NORM
ICS 11.060.20
English Version
Dentistry - Trephine burs (ISO 20569:2018)
Medecine bucco-dentaire - Fraises-trépans (ISO Zahnheilkunde - Trepanbohrer (ISO 20569:2018)
20569:2018)
This European Standard was approved by CEN on 10 August 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20569:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 20569:2018) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 20569:2018 has been approved by CEN as EN ISO 20569:2018 without any modification.

INTERNATIONAL ISO
STANDARD 20569
First edition
2018-09
Dentistry — Trephine burs
Médecine bucco-dentaire — Fraises-trépans
Reference number
ISO 20569:2018(E)
©
ISO 2018
ISO 20569:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 20569:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
3.1 Terms and definitions . 1
3.2 Symbols . 2
4 Classifications . 2
5 Requirements . 3
5.1 Selection of metals . 3
5.2 Surface finish . 3
5.3 Dimensions . 3
5.3.1 Number of teeth . . 3
5.3.2 Diameter of the working part and wall thickness . 3
5.3.3 Length of the operative part . 4
5.3.4 Overall length . . 4
5.3.5 Dimensions of the shank . 4
5.4 Marking lines on the operative part . 4
5.4.1 General. 4
5.4.2 Thickness of scale line . . 4
5.5 Resistance to reprocessing . 4
5.6 Vickers hardness . 4
5.7 Run-out . 4
5.8 Resistance to torque . 5
6 Measurement and test methods . 5
6.1 Visual inspection . 5
6.2 Dimensions and number of teeth . 5
6.3 Resistance to reprocessing . 5
6.4 Vickers hardness . 6
6.5 Run-out . 6
6.6 Resistance to torque . 6
7 Marking, labelling and instructions for use . 6
7.1 Marking on the trephine bur . 6
7.2 Labelling on the package . 6
7.3 Instructions for use . 6
Bibliography . 7
ISO 20569:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 4, Dental
instruments.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2018 – All rights reserved

----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.