EN ISO 5842:2023
(Main)Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022)
Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022)
This document specifies a gas chromatography and a mass spectrometry method of detecting the presence of argon in metal powder produced components, consolidated by hot isostatic pressing.
This document specifies the calibration and functionality test for the equipment covered. It also specifies methods for sampling, sample preparation and sample test procedure of PM HIP components to detect argon presence.
Components produced by additive manufacturing are not covered in this document.
Pulvermetallurgie - Heißisostatisches Pressen - Nachweis von Argon mittels Gaschromatographie und massenspektrometrischer Techniken (ISO 5842:2022)
In diesem Dokument wird ein gaschromatographisches und massenspektrometrisches Verfahren zum Nachweis
von Argon in aus Metallpulver hergestellten Bauteilen, die durch heißisostatisches Pressen verfestigt wurden,
festgelegt.
In diesem Dokument werden die Kalibrierung und die Funktionsprüfung für die behandelte Ausrüstung festgelegt.
Außerdem werden Verfahren für die Probenahme, die Probenvorbereitung und die Probenprüfung von
PM-HIP-Bauteilen zum Nachweis von Argon festgelegt.
Durch additive Fertigung hergestellte Bauteile werden in diesem Dokument nicht behandelt.
WICHTIG — Es liegt in der Verantwortung des Erwerbers der PM-HIP-Dienstleistung, in der Bestellung
festzulegen, ob eine Argon-Erkennungsprüfung erforderlich ist. Ist dies der Fall, muss der vereinbarte
Grenzwert für Argon angegeben werden.
Métallurgie des poudres - Pressage isostatique à chaud - Détection de l’argon par des techniques de chromatographie en phase gazeuse et de spectrométrie de masse (ISO 5842:2022)
Le présent document spécifie une méthode de chromatographie en phase gazeuse et une méthode de spectrométrie de masse pour détecter la présence d’argon dans les constituants produits à partir de poudres de métal, consolidés par compression isostatique à chaud.
Le présent document spécifie l’étalonnage et l’essai de fonctionnalité applicables aux équipements couverts. Il spécifie également les méthodes d’échantillonnage, la préparation des échantillons et la procédure d’essai des constituants PM HIP pour détecter la présence d’argon.
Les constituants produits par fabrication additive ne sont pas couverts par le présent document.
Metalurgija prahov - Vroče izostatično stiskanje - Zaznavanje argona s tehnikami plinske kromatografije in masne spektrometrije (ISO 5842:2022)
Ta dokument določa metodo plinske kromatografije in masne spektrometrije za zaznavanje prisotnosti argona v komponentah, izdelanih iz kovinskega praška in utrjenih z vročim izostatičnim stiskanjem.
Ta dokument določa kalibracijo in preskus funkcionalnosti za obravnavano opremo. Določa tudi metode za vzorčenje, pripravo vzorcev in postopek preskušanja vzorcev komponent PM HIP za zaznavanje prisotnosti argona.
Komponente, izdelane z aditivno proizvodnjo, niso obravnavane v tem dokumentu.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5842:2023
01-september-2023
Metalurgija prahov - Vroče izostatično stiskanje - Zaznavanje argona s tehnikami
plinske kromatografije in masne spektrometrije (ISO 5842:2022)
Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography
and mass spectrometry techniques (ISO 5842:2022)
Pulvermetallurgie - Heißisostatisches Pressen - Nachweis von Argon mittels
Gaschromatographie und massenspektrometrischer Techniken (ISO 5842:2022)
Métallurgie des poudres - Pressage isostatique à chaud - Détection de l’argon par des
techniques de chromatographie en phase gazeuse et de spectrométrie de masse (ISO
5842:2022)
Ta slovenski standard je istoveten z: EN ISO 5842:2023
ICS:
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 5842:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5842:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 5842:2023
EN ISO 5842
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2023
EUROPÄISCHE NORM
ICS 77.160
English Version
Powder metallurgy - Hot isostatic pressing - Argon
detection using gas chromatography and mass
spectrometry techniques (ISO 5842:2022)
Métallurgie des poudres - Pressage isostatique à chaud Pulvermetallurgie - Heißisostatisches Pressen -
- Détection de l'argon par des techniques de Nachweis von Argon mittels Gaschromatographie und
chromatographie en phase gazeuse et de spectrométrie massenspektrometrischer Techniken (ISO 5842:2022)
de masse (ISO 5842:2022)
This European Standard was approved by CEN on 26 June 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5842:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5842:2023
EN ISO 5842:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5842:2023
EN ISO 5842:2023 (E)
European foreword
The text of ISO 5842:2022 has been prepared by Technical Committee ISO/TC 119 "Powder metallurgy”
of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 5842:2023 by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2023, and conflicting national standards
shall be withdrawn at the latest by December 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 5842:2022 has been approved by CEN as EN ISO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.