EN ISO 14692-4:2002
(Main)Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002)
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002)
ISO 14692-4:2002 gives requirements and recommendations for the fabrication, installation and operation of GRP piping systems for use in oil and natural gas industry processing and utility service applications. The recommendations apply to delivery, inspection, handling, storage, installation, system pressure testing, maintenance, repair and decommissioning.
It is intended to be read in conjunction with ISO 14692-1, which includes an explanation of the pressure terminology used in ISO 1469-4:2002.
Erdöl- und Erdgasindustrie - Glasfaserverstärkte Kunstoffrohrleitungen (GFK) - Teil 4: Fertigung, Installation und Betrieb (ISO 14692-4:2002)
Industries du pétrole et du gaz naturel - Canalisations en plastique renforcé de verre (PRV) - Partie 4: Construction, installation et mise en oeuvre (ISO 14692-4:2002)
L'ISO 14692-4:2002 spécifie les exigences et recommandations relatives à la fabrication, à l'installation et à la mise en ?uvre des systèmes de canalisations en PRV destinés à être utilisés pour les applications de services procédé et énergie dans les industries du pétrole et du gaz naturel. Les recommandations s'appliquent à la livraison, au contrôle, à la manutention, au stockage, à l'installation, aux essais de pression effectués sur le système, à la maintenance, à la réparation et au démantèlement.
Elle est destinée à être lue de pair avec l'ISO 14692-1, qui comprend une explication de la terminologie en matière de pression utilisée dans l'ISO 14692-4:2002.
Industrija za predelavo nafte in zemeljskega plina - S steklenimi vlakni ojačeni polimerni cevovodi (GRP) - 4. del: Izdelava, vgradnja in delovanje (ISO 14692-4:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2004
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD6VWHNOHQLPLYODNQLRMDþHQL
SROLPHUQLFHYRYRGL *53 GHO ,]GHODYDYJUDGQMDLQGHORYDQMH ,62
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4:
Fabrication, installation and operation (ISO 14692-4:2002)
Erdöl- und Erdgasindustrie - Glasfaserverstärkte Kunstoffrohrleitungen (GFK) - Teil 4:
Fertigung, Installation und Betrieb (ISO 14692-4:2002)
Industries du pétrole et du gaz naturel - Canalisations en plastique renforcé de verre
(PRV) - Partie 4: Construction, installation et mise en oeuvre (ISO 14692-4:2002)
Ta slovenski standard je istoveten z: EN ISO 14692-4:2002
ICS:
75.200 2SUHPD]DVNODGLãþHQMH Petroleum products and
QDIWHQDIWQLKSURL]YRGRYLQ natural gas handling
]HPHOMVNHJDSOLQD equipment
83.140.30 Cevi, fitingi in ventili iz Plastics pipes, fittings and
polimernih materialov valves
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 14692-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2002
ICS 75.200; 83.140.30
English version
Petroleum and natural gas industries - Glass-reinforced plastics
(GRP) piping - Part 4: Fabrication, installation and operation
(ISO 14692-4:2002)
Industries du pétrole et du gaz naturel - Canalisations en
plastique renforcé de verre (PRV) - Partie 4: Construction,
installation et mise en oeuvre (ISO 14692-4:2002)
This European Standard was approved by CEN on 2 December 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14692-4:2002 E
worldwide for CEN national Members.
Foreword
This document (EN ISO 14692-4:2002) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum and natural gas industries", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2003, and conflicting national
standards shall be withdrawn at the latest by June 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
NOTE FROM CMC The foreword is susceptible to be amended on reception of the German
language version. The confirmed or amended foreword, and when appropriate, the normative
annex ZA for the references to international publications with their relevant European
publications will be circulated with the German version.
Endorsement notice
The text of ISO 14692-4:2002 has been approved by CEN as EN ISO 14692-4:2002 without any
modifications.
INTERNATIONAL ISO
STANDARD 14692-4
First edition
2002-12-15
Petroleum and natural gas industries —
Glass-reinforced plastics (GRP) piping —
Part 4:
Fabrication, installation and operation
Industries du pétrole et du gaz naturel — Canalisations en plastique
renforcé de verre (PRV) —
Partie 4: Construction, installation et mise en œuvre
Reference number
ISO 14692-4:2002(E)
©
ISO 2002
ISO 14692-4:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2002 — All rights reserved
ISO 14692-4:2002(E)
Contents Page
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 1
4 Symbols and abbreviated terms. 2
5 Fabrication and installation . 2
5.1 Delivery, inspection and documentation of GRP piping. 2
5.2 Handling and storage . 2
5.3 System design documentation. 2
5.4 Installer requirements. 3
5.5 Installation methods . 3
5.6 System testing. 12
5.7 Inspection . 13
5.8 Certification and documentation. 15
5.9 Repair after installation . 15
6 Operations . 15
6.1 Operator's documentation . 15
6.2 Maintenance and repair. 17
6.3 Repair methods . 19
6.4 Modifications and tie-ins. 21
6.5 Requirements for testing and re-certification. 21
6.6 Decommissioning . 21
Annex A (normative) Defect types — Acceptance criteria and corrective actions . 22
Annex B (normative) Handling and storage . 29
Annex C (informative) Guidance for use of jointing methods . 32
Annex D (normative) Qualification of pipe fitter, supervisor and inspector . 41
Annex E (informative) Guidance on NDE methods . 47
Annex F (normative) Health and safety. 51
Bibliography . 52
ISO 14692-4:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14692-4 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries, Subcommittee SC 6, Processing equipment and
systems.
ISO 14692 consists of the following parts, under the general title Petroleum and natural gas industries —
Glass-reinforced plastics (GRP) piping:
Part 1: Vocabulary, symbols, applications and materials
Part 2: Qualification and manufacture
Part 3: System design
Part 4: Fabrication, installation and operation
iv © ISO 2002 — All rights reserved
ISO 14692-4:2002(E)
Introduction
The objective of this part of ISO 14692-4 is to ensure that installed piping systems will meet the specified
performance requirements throughout their operational life. Main users of the document are envisaged to be
the principal, fabrication/installation contractors, repair and maintenance contractors, certifying authorities and
government agencies.
INTERNATIONAL STANDARD ISO 14692-4:2002(E)
Petroleum and natural gas industries — Glass-reinforced
plastics (GRP) piping —
Part 4:
Fabrication, installation and operation
1 Scope
This part of ISO 14692 gives requirements and recommendations for the fabrication, installation and operation
of GRP piping systems for use in oil and natural gas industry processing and utility service applications. The
recommendations apply to delivery, inspection, handling, storage, installation, system pressure testing,
maintenance, repair and decommissioning.
It is intended to be read in conjunction with ISO 14692-1, which includes an explanation of the pressure
terminology used in this part of ISO 14692.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 9712, Non-destructive testing — Qualification and certification of personnel
ISO 14692-1:2002, Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1:
Vocabulary, symbols, applications and materials
ISO 14692-2:2002, Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2:
Qualification and manufac
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.