iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13022-1:2006/FprA1

(Amendment)

Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing

Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing

This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in "Structural Sealant Glazing" (SSG) applications. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the suitability for use in SSG systems.
Only soda lime silicate glasses are taken into consideration in this European Standard.
Plastic glazing is excluded from the scope of this European Standard.
Any glass products meeting the requirements of this European Standard are suitable for use in SSG systems as defined in ETAG 002 ) "Structural sealant glazing system".
All glass products are installed and bonded into the support under controlled environmental conditions as described in Clause 5 of EN 13022-2:2006.
When the outer seal of the insulating glass unit has a structural function and/or is exposed to UV radiation without any protection, only silicone based sealant are permitted in the construction of the unit.

Glas im Bauwesen - Geklebte Verglasung - Teil 1: Glasprodukte für SSG-Systeme - Einfach- und Mehrfachverglasungen mit und ohne Abtragung des Eigengewichtes

Verre dans la construction - Vitrage extérieur collé (VEC) - Partie 1: Produits verriers pour les sytèmes de vitrages extérieurs collés pour produits monolithiques et produits multiples calés et non calés

Steklo v gradbeništvu - Strukturna zasteklitev - 1. del: Stekleni proizvodi za strukturne zasteklitve za podprte in nepodprte monolitne in sestavljene zasteklitve

General Information

Status
Not Published
ICS
01.040.81 - Glass and ceramics industries (Vocabularies)
81.040.20 - Glass in building
Technical Committee
CEN/TC 129 - Glass in building
Drafting Committee
CEN/TC 129/WG 16 - Structural glazing
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
22-Jan-2010
Due Date
10-Jan-2011
Completion Date
22-Jan-2010
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
Ref Project
SIST EN 13022-1:2006/kFprA1:2009 - Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing

Relations

Merged Into
EN 13022-1:2006+A1:2010 - Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
Effective Date
18-Jan-2023
Amends
EN 13022-1:2006 - Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
Effective Date
04-Jul-2009

Buy Standard

EN 13022-1:2006/kFprA1:2009EN 13022-1:2006/kFprA1:2009
PreviousNext
Draft
EN 13022-1:2006/kFprA1:2009
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2009
Steklo v gradbeništvu - Strukturna zasteklitev - 1. del: Stekleni proizvodi za
strukturne zasteklitve za podprte in nepodprte monolitne in sestavljene zasteklitve
Glass in building - Structural sealant glazing - Part 1: Glass products for structural
sealant glazing systems for supported and unsupported monolithic and multiple glazing
Glas im Bauwesen - Geklebte Verglasung - Teil 1: Glasprodukte für SSG-Systeme -
Einfach- und Mehrfachverglasungen mit und ohne Abtragung des Eigengewichtes
Verre dans la construction - Vitrage extérieur collé (VEC) - Partie 1: Produits verriers
pour les sytèmes de vitrages extérieurs collés pour produits monolithiques et produits
multiples calés et non calés
Ta slovenski standard je istoveten z: EN 13022-1:2006/FprA1
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 13022-1:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
October 2009
ICS 01.040.81; 81.040.20
English Version
Glass in building - Structural sealant glazing - Part 1: Glass
products for structural sealant glazing systems for supported
and unsupported monolithic and multiple glazing
Verre dans la construction - Vitrage extérieur collé (VEC) - Glas im Bauwesen - Geklebte Verglasung - Teil 1:
Partie 1: Produits verriers pour les sytèmes de vitrages Glasprodukte für SSG-Systeme - Einfach- und
extérieurs collés pour produits monolithiques et produits Mehrfachverglasungen mit und ohne Abtragung des
multiples calés et non calés Eigengewichtes
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 129.
This draft amendment A1, if approved, will modify the European Standard EN 13022-1:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 12543-1:2021(Main)
Glass in building - Laminated glass and laminated safety glass - Part 1: Vocabulary and description of component parts (ISO 12543-1:2021)
SIST EN ISO 12543-1:2022

This document defines terms and describes component parts for laminated glass and laminated safety glass for use in building.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 572-1:2012+A1:2016(Main)
Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
SIST EN 572-1:2012+A1:2016

This Part of this European Standard specifies and classifies basic glass products and indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria.
Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of EN 572 specific to each product type:
-   EN 572-2   Float glass;
-   EN 572-3   Polished wired glass;
-   EN 572-4   Drawn sheet glass;
-   EN 572-5   Patterned glass;
-   EN 572-6   Wired patterned glass;
-   EN 572-7   Wired or unwired channel shaped glass;
-   EN 572-8   Supplied and final cut sizes;
-   EN 572-9   Evaluation of conformity/Product standard.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1096-1:2012(Main)
Glass in building - Coated glass - Part 1: Definitions and classification
SIST EN 1096-1:2012

This European Standard defines the characteristics, properties and classification of coated glass for use in building.
Test methods and procedures used to establish durability are in Parts 2 and 3 of this standard.
Factory production control and evaluation of conformity, including Annex ZA, are in Part 4 of this standard.
Test methods for determination of self cleaning performances of coated glass are in Part 5.
This standard applies to coated glass for glazing application for use in normally occupied domestic or commercial premises.
This standard is not applicable to:
   adhesive backed polymeric films on glass (prEN 15755-1);
   mirrors made from silvered float glass (EN 1036-1);
   enamelled glass (EN 12150-1).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1748-1-1:2004(Main)
Glass in building - Special basic products -Borosilicate glasses - Part 1-1: Definition and general physical and mechanical properties
SIST EN 1748-1-1:2004

This document defines and classifies borosilicate glasses for use in building.  It indicates their chemical composition, main physical and mechanical properties, dimensional and minimum quality requirements (in respect of optical and visual faults).
This document applies to borosilicate glasses supplied in stock sizes or in cut sizes for final end use.
This document does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m².

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1748-2-1:2004(Main)
Glass in building - Special basic products - Glass ceramics - Part 2-1 Definitions and general physical and mechanical properties
SIST EN 1748-2-1:2004

This document defines, specifies and classifies glass ceramics for use in building.  It indicates their chemical composition, main physical and mechanical properties, dimensional and minimum quality requirements (in respect of optical and visual faults).
This document applies to glass ceramics supplied in stock sizes or in cut sizes for final end use.
This document does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m².

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1748-2-1(Main)
Glass in Building - Special basic products - Glass ceramics - Part 2-1: Definitions and general physical and mechanical properties
oSIST prEN 1748-2-1:2017

This European Standard specifies and classifies special basic products - glass ceramics, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and minimum quality requirements (in respect of optical and visual faults).
This European Standard applies to special basic products - glass ceramics supplied in stock sizes, supplied sizes or in cut sizes for final end use.
This European Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m2.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 572-1:2012/FprA1(Amendment)
Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
SIST EN 572-1:2012/kFprA1:2015

This Part of this European Standard specifies and classifies basic glass products and indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria.
Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of this European Standard specific to each product type:
-   EN 572-2   Float glass
-   EN 572-3   Polished wired glass
-   EN 572-4   Drawn sheet glass
-   EN 572-5   Patterned glass
-   EN 572-6   Wired patterned glass
-   EN 572-7   Wired or unwired channel shaped glass
-   EN 572-8   Supplied and final cut sizes
-   EN 572-9   Evaluation of conformity/Product standard

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 15752-1(Main)
Glass in building - Adhesive backed polymeric film - Part 1: Definitions and descriptions
oSIST prEN 15752-1:2008

This European Standard defines adhesive backed polymeric film and the performance characteristics of adhesive backed polymeric film for use, on glass, in buildings. This standard does not apply to adhesive backed polymeric films manufactured from polyvinylchloride (PVC). Other requirements, not specified in this standard, may apply to adhesive backed polymeric film that is incorporated into assemblies, e.g. laminated glass or insulating glass units. The additional requirements are specified in the appropriate product standard. Adhesive backed polymeric film, in this case, does not lose its mechanical or thermal characteristics.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 15755-1(Main)
Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and descriptions
oSIST prEN 15755-1:2008

This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass that has had an adhesive backed polymeric film applied, for use in buildings. This standard does not apply to adhesive backed polymeric films manufactured from polyvinylchloride (PVC).

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12543-1:2021(Main)
Glass in building - Laminated glass and laminated safety glass - Part 1: Vocabulary and description of component parts (ISO 12543-1:2021)
SIST EN ISO 12543-1:2022

This document defines terms and describes component parts for laminated glass and laminated safety glass for use in building.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day