prEN 17940
(Main)Glass in Building - Folio Interlayers for the Manufacturing of Laminated Glass - Product standard
Glass in Building - Folio Interlayers for the Manufacturing of Laminated Glass - Product standard
This document specifies the composition, tolerances and characteristics, i.e. mechanical, acoustic, optical, and thermal properties, of folio interlayers for the manufacturing of laminated glass and laminated safety glass for use in buildings and construction works and it defines their general quality criteria.
This document does not apply to interlayers for laminated glass which are achieved by pouring the interlayer material in liquid state on or between the plies of glass or plastic glazing sheet material followed by drying or chemical or ultraviolet curing.
Glas im Bauwesen - Folien-Zwischenlagen für die Herstellung von Verbundglas - Produktnorm
Dieses Dokument legt die Zusammensetzung, die Grenzabweichungen und die Merkmale, d. h. die mechanischen, akustischen, optischen und thermischen Eigenschaften von Folien-Zwischenschichten für die Herstellung von Verbundglas und Verbundsicherheitsglas für die Verwendung in Gebäuden und Bauwerken fest und definiert ihre allgemeinen Qualitätskriterien.
Dieses Dokument ist nicht auf Zwischenschichten für Verbundglas anwendbar, die hergestellt werden, indem der Zwischenschichtwerkstoff in flüssigem Zustand auf oder zwischen die Glasschichten oder Kunststoffverglasungsplatten gegossen und nachfolgend getrocknet oder chemisch oder ultraviolettgehärtet wird.
Verre dans la construction - Films intercalaires pour la fabrication du verre feuilleté - Norme de produit
Le présent document spécifie la composition, les tolérances et les caractéristiques, c’est-à-dire les propriétés mécaniques, acoustiques, optiques et thermiques des films intercalaires pour la fabrication de verre feuilleté et de verre feuilleté de sécurité destinés à un usage dans les bâtiments et les ouvrages de construction, et il définit leurs critères de qualité généraux.
Le présent document ne s’applique pas aux intercalaires pour verre feuilleté qui sont obtenus en versant le matériau de l’intercalaire à l’état liquide sur ou entre les feuilles de verre ou de plastique, puis par séchage, polymérisation chimique ou durcissement par les ultraviolets.
Steklo v gradbeništvu - Vmesna folija za izdelavo laminiranega stekla - Standard za proizvod
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 17940:2023
01-marec-2023
Steklo v gradbeništvu - Vmesna folija za izdelavo laminiranega stekla - Standard
za proizvod
Glass in Building - Folio Interlayers for the Manufacturing of Laminated Glass - Product
standard
Glas im Bauwesen - Folien-Zwischenlagen für die Herstellung von Verbundglas -
Produktnorm
Verre dans la construction - Films intercalaires pour la fabrication du verre feuilleté -
Norme de produit
Ta slovenski standard je istoveten z: prEN 17940
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN 17940:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17940:2023
---------------------- Page: 2 ----------------------
oSIST prEN 17940:2023
DRAFT
EUROPEAN STANDARD
prEN 17940
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2023
ICS 81.040.20
English Version
Glass in Building - Folio Interlayers for the Manufacturing
of Laminated Glass - Product standard
Verre dans la construction - Films intercalaires pour la Glas im Bauwesen - Folien-Zwischenlagen für die
fabrication du verre feuilleté - Norme de produit Herstellung von Verbundglas - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 129.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17940:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17940:2023
prEN 17940:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 General. 5
5 Properties of folios before processing . 5
5.1 Dimensions. 5
5.1.1 Length and width . 5
5.1.2 Thickness . 5
5.2 Appearance . 6
5.2.1 General.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.