EN 197-2:2014

Cement - Part 2: Conformity evaluation

This European Standard specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements to their corresponding product specification standards, including certification of constancy of performance by a product certification body.
The standard provides technical rules for factory production control by the manufacturer, including autocontrol testing of samples, and for the tasks of the product certification body. It also provides rules for actions to be followed in the event of non-conformity, the procedure for the AVCP and requirements for dispatching centres.
In this European Standard, the word “cement” is used to refer both to common cements as defined in EN 197 1 and to other cements and binders for which the relevant product specification standard makes reference to this European Standard and which are submitted for certification. Such a cement is produced at a given factory and belongs to a particular type and a particular strength class, as defined and specified in the relevant product specification standard.
The guidelines given in the Technical Report CEN/TR 14245 [1] ) should be used for the application of this European Standard.
This European Standard should be linked with Annexes ZA of European Standards covering cements and binders, i.e. EN 197 1, EN 14216, EN 14647, EN 413 1, EN 15743, in particular for the assignments of tasks to the manufacturer and to the product certification body.
NOTE   The reason for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards.

Zement - Teil 2: Konformitätsbewertung

Diese Europäische Norm legt das Verfahren für die Bewertung und Überprüfung der Leistungsbeständigkeit (en: assessment and verification of constancy of performance (AVCP)) von Zementen nach den ent-sprechenden Produktnormen einschließlich der Zertifizierung der Leistungsbeständigkeit durch eine Produkt-zertifizierungsstelle fest.
Die Norm enthält technische Regeln für die werkseigene Produktionskontrolle durch den Hersteller, einschließlich der internen Überwachungsprüfungen von Proben, und für die Aufgaben der Produktzertifizierungsstelle. Sie enthält darüber hinaus Regeln für Maßnahmen, die bei Nichtkonformität zu ergreifen sind, sowie das Verfahren für die Bewertung und Überprüfung der Leistungsbeständigkeit und Anforderungen für Auslieferungsstellen.
In dieser Europäischen Norm verweist das Wort „Zement“ sowohl auf Normalzemente, wie in EN 197-1 festgelegt, als auch auf weitere Zemente und Bindemittel, deren entsprechende Produktnormen auf diese Europäische Norm verweisen und die der Zertifizierung unterworfen werden. Solch ein Zement wird in einem bestimmten Werk hergestellt und gehört zu einer bestimmten Art und Festigkeitsklasse, wie in der zugehörigen Produktnorm definiert und festgelegt.
Für die Anwendung dieser Europäischen Norm sollte die im Technischen Bericht CEN/TR 14245 11) gegebene Anleitung verwendet werden.
Diese Europäische Norm sollte mit dem Anhang ZA von Europäischen Normen, die Zemente und Bindemittel behandeln, d. h. EN 197 1, EN 14216, EN 14647, EN 413 1 und EN 15743, verknüpft werden, insbesondere im Hinblick auf die Zuweisung von Aufgaben für den Hersteller und die Produktzertifizierungs¬stelle.
ANMERKUNG   Grund für die Verfassung dieses gesonderten Dokuments ist, dass die hierin enthaltenen Festlegungen auf unterschiedliche Produkte anwendbar sind, die in verschiedenen Europäischen Normen behandelt werden.

Ciment - Partie 2: Evaluation de la conformité

La présente Norme européenne spécifie le système d’évaluation de conformité des ciments aux normes de
spécification de produit correspondantes qui inclut une certification de conformité par un organisme de
certification.
La norme fournit des règles techniques applicables au contrôle de la production en usine effectué par le
fabricant, y compris les essais d’autocontrôle sur des échantillons, et aux tâches incombant à l’organisme de
certification. Elle établit également des règles à suivre en cas de non-conformité, la procédure de certification
de conformité et les exigences applicables aux centres de distribution.
Dans la présente Norme européenne, le terme « ciment » est utilisé pour faire référence aux ciments courants
définis dans l’EN 197-1 ainsi qu’aux autres ciments et liants dont les normes de spécification de produit
correspondantes font référence à la présente Norme européenne et qui sont soumis à certification. Un tel
ciment est produit dans une usine donnée et appartient à un type et à une classe de résistance particuliers,
définis et spécifiés dans la norme de spécification de produit correspondante.
Il convient d’utiliser les lignes directrices données dans le Rapport du CEN CR 14245 [1] pour l’application de
la présente Norme européenne.
La présente Norme européenne doit être mise en relation avec les Annexes ZA des Normes européennes
traitant des ciments et des liants, à savoir l’EN 197-1, l’EN 14216, l’EN 14647, l’EN 413-1 et l’EN 15743, en
particulier pour l’attribution des tâches au fabricant et à l’organisme de certification.
NOTE La raison pour laquelle ce document séparé a été rédigé est que les dispositions qu’il contient sont
applicables à différents produits couverts par des Normes européennes différentes.

Cement - 2. del: Ovrednotenje skladnosti

General Information

• Status: Withdrawn
• Publication Date: 21-Jan-2014
• Withdrawal Date: 10-Mar-2020
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 51 - Cement and building limes
• Drafting Committee: CEN/TC 51/WG 13 - Assessment of conformity
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 11-Mar-2020
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/114 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on cements, buliding limes, and other hydr. binders
• Ref Project: SIST EN 197-2:2014 - Cement - Part 2: Conformity evaluation

Relations

• Replaces: EN 197-2:2000 - Cement - Part 2: Conformity evaluation
• Effective Date: 06-Aug-2011
• Replaced By: EN 197-2:2020 - Cement - Part 2: Assessment and verification of constancy of performance
• Effective Date: 24-Mar-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cement - 2. del: Ovrednotenje skladnostiZement - Teil 2: KonformitätsbewertungCiment - Partie 2: Evaluation de la conformitéCement - Part 2: Conformity evaluation91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 197-2:2014SIST EN 197-2:2014en,fr,de01-april-2014SIST EN 197-2:2014SLOVENSKI
STANDARDSIST EN 197-2:20011DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 197-2
January 2014 ICS 91.100.10 Supersedes EN 197-2:2000English Version
Cement - Part 2: Conformity evaluation
Ciment - Partie 2: Evaluation de la conformité
Zement - Teil 2: Konformitätsbewertung This European Standard was approved by CEN on 9 November 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 197-2:2014 ESIST EN 197-2:2014

Foreword .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Factory production control by the manufacturer .7 4.1 General requirements .7 4.1.1 Concept .7 4.1.2 Works' quality manual .7 4.1.3 Management systems .8 4.1.4 System of documentation .8 4.2 Internal quality control .9 4.2.1 Process control .9 4.2.2 Measuring and testing .9 4.2.3 Handling, storage, packaging and delivery .9 4.3 Autocontrol testing of samples .9 4.3.1 Sampling and testing .9 4.3.2 Corrective action. 10 4.3.3 Measuring and test equipment for autocontrol testing . 10 4.3.4 Quality records . 10 5 Tasks for the product certification body . 10 5.1 General . 10 5.2 Continuous surveillance, assessment and evaluation of the factory production control . 11 5.2.1 Inspection tasks . 11 5.2.2 Frequency of inspections . 11 5.2.3 Reports . 11 5.3 Evaluation of the results of autocontrol testing of samples . 11 5.3.1 Evaluation tasks. 11 5.3.2 Number and timing of evaluations . 11 5.3.3 Control period . 11 5.3.4 Evaluation of test results . 11 5.3.5 Reports . 12 5.4 Audit testing of samples taken at the factory/depot and determination of the product-type by testing . 12 5.4.1 Sampling . 12 5.4.2 Number of samples. 12 5.4.3 Properties and test methods . 12 5.4.4 Testing . 12 5.4.5 Evaluation of test results . 13 5.4.6 Reports . 13 5.4.7 Proficiency testing . 13 5.5 Initial inspection of the factory and the factory production control . 13 5.5.1 Inspection of a new factory . 13 5.5.2 Inspection of an existing factory . 13 5.5.3 Criteria for the assessment of the production equipment . 13 5.5.4 Criteria for the assessment of laboratories . 14 5.5.5 Reports . 14 5.6 Evaluation of test results during the initial period . 14 5.6.1 Initial period . 14 5.6.2 Evaluation of test results . 14 5.6.3 Reports . 14 SIST EN 197-2:2014

Evaluation of the representativeness and the accuracy of the 28 day strength test results . 21 A.1 General . 21 A.2 Sets of results considered. 21 A.3 Evaluation procedure . 21 Annex B (informative)
Procedure for certification of constancy of performance of cement . 24 Annex C (informative)
Comparison of terminology according to the CPD and the CPR . 25 Bibliography . 26 Tables Table 1 — Actions to be taken by the product certification body in the event of non-conformity of the results of autocontrol and/or audit testing . 19 Table 2 — Confirmation and audit testing of samples of certified cement taken at dispatching centres: properties and minimum testing frequencies a . 20 Table A.1 — Symbols . 22 Table A.2 — Numerical criteria for masonry cement conforming to EN 413–1 . 23 Table A.3 — Numerical criteria for calcium aluminate cement conforming to EN 14647 . 23 Table C.1 — Comparison of terminology according to the CPD and the CPR . 25
...