EN 2885:2023

Aerospace series - Screw, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C

This document specifies the characteristics of screws, pan head, offset cruciform recess, coarse tolerance
normal shank, short thread, in alloy steel, cadmium plated.
Classification: 900 MPa1/235 °C2.

Luft- und Raumfahrt - Flachkopfschraube mit Flügelkreuzschlitz, kurzes Gewinde, aus legiertem Stahl, verkadmet - Klasse: 900 MPa (bei Raumtemperatur)/235 °C

Dieses Dokument legt die Eigenschaften von Flachkopfschrauben mit Flügelkreuzschlitz, grober Toleranz und üblichem Schaft, kurzem Gewinde, aus legiertem Stahl, kadmiert, fest.
Klasse: 900 MPa /235 °C .

Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, tige normale à tolérance large, filetage court, en acier allié, cadmiées - Classification: 900 MPa (à température ambiante)/235 °C

Aeronavtika - Vijaki, valjasta glava, križna zareza, široka toleranca, kratek navoj, iz legiranega jekla, kadmirani - Klasifikacija: 900 MPa (pri okoljski temperaturi)/235 °C

Ta dokument določa značilnosti vijakov, valjastih glav, križne zareze, široka toleranca, kratek navoj, iz legiranega jekla, kadmirani.
Klasifikacija: 900 MPa1/235 °C2.

General Information

• Status: Published
• Publication Date: 21-Feb-2023
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3/S 2 - Fasteners
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Feb-2023
• Completion Date: 22-Feb-2023
• Ref Project: SIST EN 2885:2023 - Aerospace series - Screw, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C

Relations

• Replaces: EN 2885:1996 - Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
• Effective Date: 04-Feb-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2023
Aeronavtika - Vijaki, valjasta glava, križna zareza, široka toleranca, kratek navoj, iz
legiranega jekla, kadmirani - Klasifikacija: 900 MPa (pri okoljski temperaturi)/235 °C
Aerospace series - Screw, pan head, offset cruciform recess, coarse tolerance normal
shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient
temperature)/235 °C
Luft- und Raumfahrt - Flachkopfschraubn mit Flügelkreuzschlitz, kurzes Gewinde, aus
legiertem Stahl, verkadmet - Klasse: 900 MPa (bei Raumtemperatur)/235 °C
Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, tige normale
à tolérance large, filetage court, en acier allié, cadmiées - Classification: 900 MPa (à
température ambiante)/235 °C
Ta slovenski standard je istoveten z: EN 2885:2023
ICS:
49.025.10 Jekla Steels
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2885
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2023
EUROPÄISCHE NORM
ICS 49.030.20 Supersedes EN 2885:1996
English Version
Aerospace series - Screw, pan head, offset cruciform
recess, coarse tolerance normal shank, short thread, in
alloy steel, cadmium plated - Classification: 900 MPa (at
ambient temperature)/235 °C
Série aérospatiale - Vis à tête cylindrique, à empreinte Luft- und Raumfahrt - Flachkopfschraubn mit
cruciforme déportée, tige normale à tolérance large, Flügelkreuzschlitz, kurzes Gewinde, aus legiertem
filetage court, en acier allié, cadmiées - Classification: Stahl, verkadmet - Klasse: 900 MPa (bei
900 MPa (à température ambiante)/235 °C Raumtemperatur)/235 °C
This European Standard was approved by CEN on 7 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2885:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and defintions . 4
4 Required characteristics . 5
4.1 Configuration – Dimensions – Masses . 5
4.2 Tolerances of form and position . 5
4.3 Materials . 5
4.4 Surface treatment . 6
5 Designation . 8
6 Marking . 8
7 Technical specification . 9
7.1 General. 9
7.2 Approval of manufacturers . 9
7.3 Other modified requirements . 9
7.4 Requirements deleted . 9
Annex A (informative) Standard evolution form . 10

European foreword
This document (EN 2885:2023) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2023, and conflicting national standards shall be
withdrawn at the latest by August 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2885:1996.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following
...