iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN ISO/TR 24971:2020

(Main)

Medical devices - Guidance on the application of ISO 14971 (ISO/TR 24971:2020)

Medical devices - Guidance on the application of ISO 14971 (ISO/TR 24971:2020)

This document provides guidance on the development, implementation and maintenance of a risk management system for medical devices according to ISO 14971:2019.
The risk management process can be part of a quality management system, for example one that is based on ISO 13485:2016[24], but this is not required by ISO 14971:2019. Some requirements in ISO 13485:2016 (Clause 7 on product realization and 8.2.1 on feedback during monitoring and measurement) are related to risk management and can be fulfilled by applying ISO 14971:2019. See also the ISO Handbook: ISO 13485:2016 — Medical devices — A practical guide[25].

Medizinprodukte - Leitfaden zur Anwendung von ISO 14971 (ISO/TR 24971:2020)

Dispositifs médicaux - Recommandations relatives à l'application de l'ISO 14971 (ISO/TR 24971:2020)

Le présent document fournit des recommandations relatives au développement, à la mise en œuvre et à la tenue à jour d'un système de gestion des risques pour les dispositifs médicaux conformément à l'ISO 14971:2019.
Le processus de gestion des risques peut faire partie d'un système de management de la qualité qui s'appuie, par exemple, sur l'ISO 13485:2016[24], mais cela n'est pas requis par l'ISO 14971:2019. Certaines exigences de l'ISO 13485:2016 (Article 7 relatif à la réalisation du produit et 8.2.1[eXtyles1]  relatives aux retours d'information au cours de la surveillance et du mesurage) portent sur la gestion des risques et peuvent être satisfaites en appliquant l'ISO 14971:2019. Voir également le manuel ISO: ISO 13485:2016 — Medical devices — A practical guide[25].
[eXtyles1]No section matches the in-text citation "8.2.1". Please supply the missing section or delete the citation.

Medicinski pripomočki - Navodilo za uporabo ISO 14971 (ISO/TR 24971:2020)

General Information

Status
Published
Publication Date
21-Jul-2020
ICS
11.040.01 - Medical equipment in general
Technical Committee
CEN/CLC/TC 3 - Quality management and corresponding general aspects for medical devices
Drafting Committee
CEN/CLC/TC 3 - Quality management and corresponding general aspects for medical devices
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
22-Jul-2020
Completion Date
22-Jul-2020
Ref Project
SIST-TP CEN ISO/TR 24971:2020 - Medical devices - Guidance on the application of ISO 14971 (ISO/TR 24971:2020)

Buy Standard

TP CEN ISO/TR 24971:2020 - BARVETP CEN ISO/TR 24971:2020 - BARVE
PreviousNext
Technical report
TP CEN ISO/TR 24971:2020 - BARVE
English language
96 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 24971:2020
01-september-2020
Medicinski pripomočki - Navodilo za uporabo ISO 14971 (ISO/TR 24971:2020)
Medical devices - Guidance on the application of ISO 14971 (ISO/TR 24971:2020)
Medizinprodukte - Leitfaden zur Anwendung von ISO 14971 (ISO/TR 24971:2020)
Dispositifs médicaux - Directives relatives à l'ISO 14971 (ISO/TR 24971:2020)
Ta slovenski standard je istoveten z: CEN ISO/TR 24971:2020
ICS:
11.040.01 Medicinska oprema na Medical equipment in general
splošno
SIST-TP CEN ISO/TR 24971:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CEN ISO/TR 24971:2020

---------------------- Page: 2 ----------------------
SIST-TP CEN ISO/TR 24971:2020


TECHNICAL REPORT
CEN ISO/TR 24971

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
July 2020
ICS 11.040.01

English version

Medical devices - Guidance on the application of ISO 14971
(ISO/TR 24971:2020)
Dispositifs médicaux - Recommandations relatives à Medizinprodukte - Leitfaden zur Anwendung von ISO
l'application de l'ISO 14971 (ISO/TR 24971:2020) 14971 (ISO/TR 24971:2020)


This Technical Report was approved by CEN on 16 July 2020. It has been drawn up by the Technical Committee CEN/CLC/JTC 3.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
























CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2020 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. CEN ISO/TR 24971:2020 E
reserved worldwide for CEN national Members and for
CENELEC Members.

---------------------- Page: 3 ----------------------
SIST-TP CEN ISO/TR 24971:2020
CEN ISO/TR 24971:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST-TP CEN ISO/TR 24971:2020
CEN ISO/TR 24971:2020 (E)
European foreword
This document (CEN ISO/TR 24971:2020) has been prepared by Technical Committee ISO/TC 210
"Quality management and corresponding general aspects for medical devices" in collaboration with
Technical Committee CEN/CLC/JTC 3 “Quality management and corresponding general aspects for
medical devices” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of ISO/TR 24971:2020 has been approved by CEN as CEN ISO/TR 24971:2020 without any
modification.


3

---------------------- Page: 5 ----------------------
SIST-TP CEN ISO/TR 24971:2020

---------------------- Page: 6 ----------------------
SIST-TP CEN ISO/TR 24971:2020
TECHNICAL ISO/TR
REPORT 24971
Second edition
2020-06
Medical devices — Guidance on the
application of ISO 14971
Dispositifs médicaux — Recommandations relatives à l'application de
l'ISO 14971
Reference number
ISO/TR 24971:2020(E)
©
ISO 2020

---------------------- Page: 7 ----------------------
SIST-TP CEN ISO/TR 24971:2020
ISO/TR 24971:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 8 ----------------------
SIST-TP CEN ISO/TR 24971:2020
ISO/TR 24971:2020(E)

Contents Page
Foreword .v
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 14971:2019/A11:2021(Amendment)
Medical devices - Application of risk management to medical devices (ISO 14971:2019)
SIST EN ISO 14971:2020/A11:2022

This document specifies terminology, principles and a process for risk management of medical devices, including software as a medical device and in vitro diagnostic medical devices. The process described in this document intends to assist manufacturers of medical devices to identify the hazards associated with the medical device, to estimate and evaluate the associated risks, to control these risks, and to monitor the effectiveness of the controls.
The requirements of this document are applicable to all phases of the life cycle of a medical device. The process described in this document applies to risks associated with a medical device, such as risks related to biocompatibility, data and systems security, electricity, moving parts, radiation, and usability.
The process described in this document can also be applied to products that are not necessarily medical devices in some jurisdictions and can also be used by others involved in the medical device life cycle.
This document does not apply to:
— decisions on the use of a medical device in the context of any particular clinical procedure; or
— business risk management.
This document requires manufacturers to establish objective criteria for risk acceptability but does not specify acceptable risk levels.
Risk management can be an integral part of a quality management system. However, this document does not require the manufacturer to have a quality management system in place.
NOTE Guidance on the application of this document can be found in ISO/TR 24971[9].

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15223-1:2021(Main)
Medical devices - Symbols to be used with information to be supplied by the manufacturer - Part 1: General requirements (ISO 15223-1:2021)
SIST EN ISO 15223-1:2021

This document specifies symbols used to express information supplied for a medical device. This document is applicable to symbols used in a broad spectrum of medical devices, that are available globally and need to meet different regulatory requirements.
These symbols can be used on the medical device itself, on its packaging or in the accompanying information. The requirements of this document are not intended to apply to symbols specified in other standards.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13485:2016/A11:2021(Amendment)
Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016)
SIST EN ISO 13485:2016/A11:2021
  • Amendment
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20417:2021(Main)
Medical devices - Information to be supplied by the manufacturer (ISO 20417:2021, Corrected version 2021-12)
SIST EN ISO 20417:2021

NOTE 1        There is guidance or rationale for this Clause contained in Clause A.2.
This document specifies the requirements for information supplied by the manufacturer for a medical device or by the manufacturer for an accessory, as defined in 3.1. This document includes the generally applicable requirements for identification and labels on a medical device or accessory, the packaging, marking of a medical device or accessory, and accompanying information. This document does not specify the means by which the information is to be supplied.
NOTE 2        Some authorities having jurisdiction impose different requirements for the identification, marking and documentation of a medical device or accessory.
Specific requirements of medical device product standards or group standards take precedence over requirements of this document.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 20416:2020(Main)
Medical devices - Post-market surveillance for manufacturers (ISO/TR 20416:2020)
SIST-TP CEN ISO/TR 20416:2020

This document provides guidance on the post-market surveillance process and is intended for use by medical device manufacturers. This post-market surveillance process is consistent with relevant international standards, in particular ISO 13485 and ISO 14971. This document describes a proactive and systematic process that manufacturers can use to collect and analyse appropriate data, to provide information for the feedback processes and use this to meet applicable regulatory requirements to gain experience from the post-production activities. The output of this process can be used:
—     as input into product realization;
—     as input into risk management;
—     for monitoring and maintaining product requirements;
—     for communicating to regulatory authorities; or
—     as input into improvement processes.
This document does not address market surveillance activities to be performed by regulatory authorities. Neither does it specify a manufacturer's actions required by the applicable regulatory requirements resulting from their production or post-production activities, nor reporting to regulatory authorities. This document is not intended to replace or change applicable regulatory requirements for post-market surveillance.

  • Technical report
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14971:2019(Main)
Medical devices - Application of risk management to medical devices (ISO 14971:2019)
SIST EN ISO 14971:2020

This document specifies terminology, principles and a process for risk management of medical devices, including software as a medical device and in vitro diagnostic medical devices. The process described in this document intends to assist manufacturers of medical devices to identify the hazards associated with the medical device, to estimate and evaluate the associated risks, to control these risks, and to monitor the effectiveness of the controls.
The requirements of this document are applicable to all phases of the life cycle of a medical device. The process described in this document applies to risks associated with a medical device, such as risks related to biocompatibility, data and systems security, electricity, moving parts, radiation, and usability.
The process described in this document can also be applied to products that are not necessarily medical devices in some jurisdictions and can also be used by others involved in the medical device life cycle.
This document does not apply to:
—          decisions on the use of a medical device in the context of any particular clinical procedure; or
—          business risk management.
This document requires manufacturers to establish objective criteria for risk acceptability but does not specify acceptable risk levels.
Risk management can be an integral part of a quality management system. However, this document does not require the manufacturer to have a quality management system in place.
NOTE       Guidance on the application of this document can be found in ISO/TR 24971[9].

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    44 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13485:2016/AC:2018(Corrigendum)
Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016)
SIST EN ISO 13485:2016/AC:2018

CCMC - creation of a 2nd corrigendum as the instructions in the 1st corrigendum were incomplete and unclear

  • Corrigendum
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13485:2016(Main)
Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016)
SIST EN ISO 13485:2016

ISO 13485:2016 specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer and applicable regulatory requirements. Such organizations can be involved in one or more stages of the life-cycle, including design and development, production, storage and distribution, installation, or servicing of a medical device and design and development or provision of associated activities (e.g. technical support). ISO 13485:2016 can also be used by suppliers or external parties that provide product, including quality management system-related services to such organizations.
Requirements of ISO 13485:2016 are applicable to organizations regardless of their size and regardless of their type except where explicitly stated. Wherever requirements are specified as applying to medical devices, the requirements apply equally to associated services as supplied by the organization.
The processes required by ISO 13485:2016 that are applicable to the organization, but are not performed by the organization, are the responsibility of the organization and are accounted for in the organization's quality management system by monitoring, maintaining, and controlling the processes.
If applicable regulatory requirements permit exclusions of design and development controls, this can be used as a justification for their exclusion from the quality management system. These regulatory requirements can provide alternative approaches that are to be addressed in the quality management system. It is the responsibility of the organization to ensure that claims of conformity to ISO 13485:2016 reflect any exclusion of design and development controls.
If any requirement in Clauses 6, 7 or 8 of ISO 13485:2016 is not applicable due to the activities undertaken by the organization or the nature of the medical device for which the quality management system is applied, the organization does not need to include such a requirement in its quality management system. For any clause that is determined to be not applicable, the organization records the justification as described in 4.2.2.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    78 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    131 pages
    Slovenian and English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15986:2011(Main)
Symbol for use in the labelling of medical devices - Requirements for labelling of medical devices containing phthalates
SIST EN 15986:2011

This European Standard specifies requirements for the labelling of a medical device or parts of a medical device to indicate the presence of phthalates, when required by Annex I of Directive 93/42/EEC Section 7.5, 2nd paragraph. This specifically includes the format of a symbol to be used in the labelling. This European Standard does not specify the requirements for information to be supplied with medical devices, which are addressed by EN 980 and EN 1041.
This European Standard does not specify the requirements of the 1st and of the 3rd paragraphs of Essential Requirement 7.5.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15223-1:2016/FprA11(Amendment)
Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO 15223-1:2016, including corrected version 2017-03)
SIST EN ISO 15223-1:2017/oprA1:2019

20200402JO- link to MDD,IVD, AIMD and M/023,M/252,M/295 removed. These links are included in the previous published version  EN ISO 15223-1:2016 - JT003045

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day