EN 420:2003/FprA1

Protective gloves - General requirements and test methods

Modification of EN 420:2003, clause 2, 4.3.3, and Annex B

Schutzhandschuhe - Allgemeine Anforderungen und Prüfverfahren

Gants de protection - Exigences générales et méthodes d'essai

Varovalne rokavice - Splošne zahteve in preskusne metode

General Information

• Status: Not Published
• ICS: 13.340.40 - Hand and arm protection
• Technical Committee: CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
• Drafting Committee: CEN/TC 162/WG 8 - Protective gloves
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 09-Sep-2009
• Due Date: 26-Nov-2009
• Completion Date: 09-Sep-2009
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: SIST EN 420:2003/kprA1:2009 - Protective gloves - General requirements and test methods

Relations

• Merged Into: EN 420:2003+A1:2009 - Protective gloves - General requirements and test methods
• Effective Date: 19-Jan-2023
• Amends: EN 420:2003 - Protective gloves - General requirements and test methods
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2009
Varovalne rokavice - Splošne zahteve in preskusne metode
Protective gloves - General requirements and test methods
Schutzhandschuhe - Allgemeine Anforderungen und Prüfverfahren
Gants de protection - Exigences générales et méthodes d'essai
Ta slovenski standard je istoveten z: EN 420:2003/FprA1
ICS:
13.340.40 Varovanje dlani in rok Hand and arm protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 420:2003
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
July 2009
ICS 13.340.40
English Version
Protective gloves - General requirements and test methods
Gants de protection - Exigences générales et méthodes Schutzhandschuhe - Allgemeine Anforderungen und
d'essai Prüfverfahren
This draft amendment is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC 162.
This draft amendment A1, if approved, will modify the European Standard EN 420:2003. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 420:2003/FprA1:2009: E
worldwide for CEN national Members.

Contents Page
...