EN ISO 12215-6:2008
(Main)Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008)
Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008)
ISO 12215-6:2008 concerns structural details and structural components not explicitly included in ISO 12215-5, ISO 12215-7, ISO 12215-8 and ISO 12215-9. It applies to monohull and multihull small craft constructed from fibre reinforced plastics (FRP), aluminium or steel alloys, wood or other suitable boat building material, with a hull length, in accordance with ISO 8666, of up to 24 m.
ISO 12215-6:2008 fulfils two functions. Firstly, it supports ISO 12215-5 by providing further explanations and calculation procedures and formulae. Secondly, it gives a number of examples of arrangements and structural details which illustrate principles of good practice. These principles provide a standard against which alternative arrangements and structural details can be benchmarked, using the equivalence criteria specified in ISO 12215-6:2008.
Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 6: Bauanordnung und Details (ISO 12215-6:2008)
Dieser Teil von ISO 12215 betrifft die Bestimmung von Baudetails und Baukomponenten, die nicht ausdrück¬lich in ISO 12215 5; ISO 12215 7, ISO 12215 8 und ISO 12215 9 aufgeführt sind. Betroffen sind kleine Ein¬rumpf- und Mehrrumpf-Wasserfahrzeuge, die aus glasfaserverstärkten Kunststoffen (GfK), Aluminium- oder Stahllegierungen, Holz oder anderen geeigneten Bootsbauwerkstoffen gebaut sind, mit einer Rumpflänge bis 24 m nach ISO 8666.
Dieser Teil von ISO 12215 erfüllt zwei Funktionen. Erstens unterstützt er ISO 12215 5, indem weitere Erklä¬rungen und Kalkulationsschemata und Gleichungen bereitgestellt werden. Zweitens stellt er eine Reihe von Beispielen für Anordnungen und Baudetails zur Verfügung, die Grundlagen guter fachlicher Praxis darstellen. Diese Grundlagen stellen einen Richtwert dar, anhand dessen alternative Anordnungen und Bauteile bewertet werden können, indem die Gleichwertigkeitskriterien, die in diesem Teil der ISO 12215 beschrieben sind, benutzt werden.
ANMERKUNG Dimensionierungen, die sich aus diesem Teil von ISO 12215 ableiten, sind in erster Linie für Sport¬boote einschließlich gecharterter Sportboote gedacht und sind möglicherweise nicht für Leistungsrennboote geeignet.
Petits navires - Construction de coques et échantillonnages - Partie 6: Dispositions et détails de construction (ISO 12215-6:2008)
L'ISO 12215-6:2008 concerne les détails de construction et les éléments structurels non explicitement mentionnés dans l'ISO 12215-5, l'ISO 12215-7, l'ISO 12215-8 et l'ISO 12215-9. Elle est applicable aux petits navires monocoques et multicoques, en plastique renforcé de fibres, en alliages d'aluminium ou d'acier, en bois ou en tout autre matériau approprié pour la construction de bateaux, d'une longueur de coque inférieure ou égale à 24 m, conformément à l'ISO 8666.
L'ISO 12215-6:2008 remplit deux fonctions. Elle apporte d'abord une aide à l'ISO 12215‑5 en donnant des explications supplémentaires ainsi que des méthodes et formules de calcul. Elle donne ensuite un certain nombre d'exemples de dispositions structurelles et de détails de construction illustrant des principes de bonne pratique. Ces principes fournissent une base de référence par rapport à laquelle d'autres dispositions structurelles et détails de construction pourront se comparer, en utilisant les critères de référence spécifiés dans l'ISO 12215-6:2008.
Mala plovila - Konstrukcija trupa in zahtevane lastnosti - 6. del: Struktura in podrobnosti (ISO 12215-6:2008)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2008
Mala plovila - Konstrukcija trupa in zahtevane lastnosti - 6. del: Struktura in
podrobnosti (ISO 12215-6:2008)
Small craft - Hull construction and scantlings - Part 6: Structural arrangements and
details (ISO 12215-6:2008)
Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 6: Bauanordnung
und Details (ISO 12215-6:2008)
Petits navires - Construction de coques et échantillonnages - Partie 6: Dispositions et
détails de construction (ISO 12215-6:2008)
Ta slovenski standard je istoveten z: EN ISO 12215-6:2008
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
47.080 ýROQL Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 12215-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2008
ICS 47.080
English Version
Small craft - Hull construction and scantlings - Part 6: Structural
arrangements and details (ISO 12215-6:2008)
Petits navires - Construction de coques et échantillonnages Kleine Wasserfahrzeuge - Rumpfbauweise und
- Partie 6: Dispositions et détails de construction (ISO Dimensionierung - Teil 6: Bauanordnung und Details (ISO
12215-6:2008) 12215-6:2008)
This European Standard was approved by CEN on 3 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12215-6:2008: E
worldwide for CEN national Members.
Contents Page
Foreword.3
Annex ZA (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 94/25/EC .4
Foreword
This document (EN ISO 12215-6:2008) has been prepared by Technical Committee ISO/TC 188 "Small craft"
in collaboration with Technical Committee CEN/SS T01 "Shipbuilding and maritime structures", the secretariat
of which is held by CMC.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at
the latest by October 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive.
For relationship with EC Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12215-6:2008 has been approved by CEN as a EN ISO 12215-6:2008 without any
modification.
Annex ZA
(informative)
Relationship between this International Standard and the Essential Requirements of
EU Directive 94/25/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 94/25/EC as amended by Directive 2003/44/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a
presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA
regulations.
Table ZA.1 — Correspondence between this International Standard and Directive 94/25/EC as
amended by Directive 2003/44/EC
Clauses/sub-clauses of this Corresponding annexes/paragraphs of Comments
international Standard EU Directive 94/25/EC as amended by
Directive 2003/44/EC
All clauses Annex I, Part A, Clause 3.1, Structure The standard provides structural details
for monohull and multihull craft
constructed from fibre reinforced
plastics, aluminium or steel alloys,
wood or similar suitable materials.
WARNING — Other requirements and other EU Directives may be applicable to the products falling
within the scope of this standard.
INTERNATIONAL ISO
STANDARD 12215-6
First edition
2008-04-01
Small craft — Hull construction and
scantlings —
Part 6:
Structural arrangements and details
Petits navires — Construction de coques et échantillonnages —
Partie 6: Dispositions et détails de construction
Reference number
ISO 12215-6:2008(E)
©
ISO 2008
ISO 12215-6:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
ISO 12215-6:2008(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Symbols .3
5 General.4
6 Structural arrangement .4
6.1 Stiffening .4
6.2 Hull girder strength.7
6.3 Load transfer.7
6.4 Determination of stiffener spans.11
6.5 Window mullions .13
6.6 Sailboat mast support .14
7 Specific structural details for FRP construction .14
7.1 Local reinforcement .14
7.2 Bonding .16
7.3 Major joints.21
7.4 Laminate transition.25
7.5 Sandwich construction .25
7.6 Attachment of fittings.25
7.7 Engine seatings and girders.25
7.8 Hull drainage .28
8 Specific structural details for metal construction.28
8.1 Design details.28
8.2 End connections.28
8.3 Increased hull plating.28
8.4 Protective keel.28
8.5 Hull drainage .29
8.6 Machinery spaces.29
8.7 Good practice welding standards.29
8.8 Good practice for riveting or adhesive bonding .29
9 Good practice on laminated wood.30
9.1 Edge sealing.30
9.2 Plywood orientation.30
9.3 Local scantlings.30
9.4 Alternative criteria .31
10 Consideration of other loads.31
11 Other structural components .31
11.1 General.31
11.2 Rudder structure and connection.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.