EN 3660-004:2023
(Main)Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief - Product standard
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief - Product standard
This document specifies a range of cable outlets, style A, straight, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s): EN 3660 002
Temperature range, Class N: −65 °C to 200 °C
Class W: −65 °C to 175 °C
Class K: −65 °C to 260 °C
Class A: −65 °C to 200 °C
Class T: −65 °C to 175 °C (nickel PTFE plating)
Class Z: −65 °C to 175 °C (black zinc nickel plating)
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 004: Endgehäuse, Bauform A, gerade Ausführung, nicht abgedichtet, mit Zugentlastungsklemme - Produktnorm
Dieses Dokument legt eine Reihe von Endgehäusen, Bauform A, gerade Ausführung, nicht abgedichtet, mit Zugentlastungsklemme für die Verwendung unter den folgenden Bedingungen fest:
Zugehörige(r) elektrische(r) Steckverbinder: EN 3660 002
Temperaturbereich, Klasse N: −65 °C bis 200 °C
Klasse W: −65 °C bis 175 °C
Klasse K: −65 °C bis 260 °C
Klasse A: −65 °C bis 200 °C
Klasse T: −65 °C bis 175 °C (Nickel mit PTFE-Beschichtung)
Klasse Z: −65 °C bis 175 °C (schwarze Zink-Nickel-Beschichtung)
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 004 : Raccord, type A, droit, non-étanche, avec brides serre-câbles - Norme de produit
Le présent document spécifie une gamme de raccords de type A, droits, non étanches, avec brides serre-câbles, destinés à être utilisés dans les conditions ci-après :
Connecteur(s) électrique(s) associé(s) : EN 3660-002
Plage de températures, classe N : −65 °C à 200 °C
classe W : −65 °C à 175 °C
classe K : −65 °C à 260 °C
classe A : −65 °C à 200 °C
classe T : −65 °C à 175 °C (nickelé PTFE)
classe Z : −65 °C à 175 °C (zinc nickelé noir)
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 004. del: Kabelska spojka, tip A, ravna, netesnjena, z razbremenilno sponko - Standard za proizvod
Ta dokument opredeljuje različne kabelske spojke, tipa A, ravne, netesnjene, z razbremenilno sponko za uporabo pod naslednjimi pogoji:
Povezani električni konektorji: EN 3660-002
Temperaturno območje, razred N: od –65 °C do 200 °C
razred W: od –65 °C do 175 °C
razred K: od –65 °C do 260 °C
razred A: od –65 °C do 200 °C
razred T: od –65 °C do 175 °C (nikljeva prevleka PTFE)
razred Z: od –65 °C do 175 °C (črna cinknikljeva prevleka)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2023
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje -
004. del: Kabelska spojka, tip A, ravna, netesnjena, z razbremenilno sponko -
Standard za proizvod
Aerospace series - Cable outlet accessories for circular and rectangular electrical and
optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain
relief - Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 004: Endgehäuse, Bauform A, gerade Ausführung, nicht
abgedichtet, mit Zugentlastungsklemme - Produktnorm
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires
électriques et optiques - Partie 004 : Raccord, type A, droit, non-étanche, avec brides
serre-câbles - Norme de produit
Ta slovenski standard je istoveten z: EN 3660-004:2023
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 3660-004
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3660-004:2018+AC:2019
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 004:
Cable outlet, style A, straight, unsealed with clamp strain
relief - Product standard
Série aérospatiale - Accessoires arrière pour Luft- und Raumfahrt - Endgehäuse für elektrische und
connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 004:
optiques - Partie 004 : Raccord, type A, droit, non- Endgehäuse, Bauform A, gerade Ausführung, nicht
étanche, avec brides serre-câbles - Norme de produit abgedichtet, mit Zugentlastungsklemme -
Produktnorm
This European Standard was approved by CEN on 9 July 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3660-004:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Characteristics . 4
4.1 Dimensions and mass . 4
4.2 Interface dimensions . 7
4.2.1 Associated connection. 7
4.2.2 Front interface . 7
4.3 Material and finish . 8
4.4 Assembly torque . 8
4.5 Coupling thread strength torque. 9
4.6 Tests . 9
5 Designation . 12
6 Marking . 12
7 Technical specification . 12
Bibliography . 13
European foreword
This document (EN 3660-004:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2024, and conflicting national standards shall be
withdrawn at the latest by April 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3660-004+AC:2019.
EN 3660-004+AC:2019:
— Table 1, Dimension K: deletion of tolerance and introduction of “max.”;
— Table 1: mass for classes N, A, W, T and Z, shell size 28 updated;
— editorial revision of the document.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document specifies a range of cable outlets, style A, straight, unsealed with clamp strain relief for
use under the following conditions:
Associated electrical connector(s): EN 3660-002
Temperature range, Class N: −65 °C to 200 °C
Class W: −65 °C to 175 °C
Class K: −65 °C to 260 °C
Class A: −65 °C to 200 °C
Class T: −65 °C to 175 °C (nickel PTFE plating)
Class Z: −65 °C to 175 °C (black zinc nickel plating)
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2591 (all parts), Aerospace series — Elements of electrical and optical connection — Test methods
EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and
optical connectors — Part 001: Tech
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.