prEN ISO 19712-3
(Main)Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO/FDIS 19712-3:2021)
Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO/FDIS 19712-3:2021)
This document specifies the methods of test for determination of the properties of solid surfacing materials, as defined in Clause 3, in the form of shaped products. These methods are primarily intended for testing the materials specified in ISO 19712-1.
The tests can be carried out on finished products, but are generally carried out on test panels of a size sufficient to meet the requirements of the test, and of the same material and finish as the finished product.
Kunststoffe - Dekorative Mineralwerkstoffe - Teil 3: Prüfverfahren - Formteile (ISO/FDIS 19712-3:2021)
Dieses Dokument legt Prüfverfahren zur Bestimmung der Eigenschaften von verschiedenen Formteilen aus Mineralwerkstoffen fest, die in Abschnitt 3 definiert sind. Diese Verfahren sind hauptsächlich zur Prüfung der in ISO 19712 1 festgelegten Werkstoffe vorgesehen.
Die Prüfungen können an fertigen Erzeugnissen durchgeführt werden, werden jedoch im Allgemeinen an Prüfplatten vorgenommen, deren Größe ausreichend ist, um die Prüfanforderungen zu erfüllen, und die aus dem gleichen Material bestehen und die gleiche Oberflächenbeschaffenheit aufweisen wie die fertigen Erzeugnisse.
SICHERHEITSVORKEHRUNGEN — Personen, die dieses Dokument anwenden, sollten gegebenenfalls mit der üblichen Laborpraxis vertraut sein. Dieses Dokument erhebt nicht den Anspruch, dass alle mit ihrer Anwendung verbundenen Sicherheitsprobleme, wenn überhaupt, angesprochen werden. Es liegt in der Verantwortung des Anwenders, geeignete Vorkehrungen für den Arbeits- und Gesundheitsschutz zu treffen und die Einhaltung jeglicher gesetzlicher Bestimmungen sicherzustellen.
Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 3: Détermination des propriétés - Produits mis en forme (ISO/FDIS 19712-3:2021)
Le présent document spécifie les méthodes d'essai pour la détermination des propriétés des matériaux massifs de revêtement de surface sous forme de produits formés, tels que définis à l'Article 3. Ces méthodes sont principalement destinées à la réalisation des essais sur les matériaux spécifiés dans l'ISO 19712‑1.
Les essais peuvent être effectués sur des produits finis, mais ils sont généralement effectués sur des panneaux d'essai de taille suffisante pour répondre aux exigences de l'essai et réalisés à partir du même matériau et de la même finition que le produit fini.
Polimerni materiali - Dekorativni trdni površinski materiali - 3. del: Ugotavljanje lastnosti - Oblika (ISO/FDIS 19712-3:2021)
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 19712-3:2022
01-januar-2022
Polimerni materiali - Dekorativni trdni površinski materiali - 3. del: Ugotavljanje
lastnosti - Oblika (ISO/FDIS 19712-3:2021)Plastics - Decorative solid surfacing materials - Part 3: Determination of properties -
Solid surface shapes (ISO/FDIS 19712-3:2021)Kunststoffe - Dekorative Mineralwerkstoffe - Teil 3: Prüfverfahren - Formteile (ISO/FDIS
19712-3:2021)Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 3:
Détermination des propriétés - Produits mis en forme (ISO/FDIS 19712-3:2021)
Ta slovenski standard je istoveten z: prEN ISO 19712-3
ICS:
83.140.20 Laminatne plošče Laminated sheets
oSIST prEN ISO 19712-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 19712-3:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 19712-3:2022
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 19712-3
ISO/TC 61/SC 11
Plastics — Decorative solid surfacing
Secretariat: JISC
materials —
Voting begins on:
2021-11-16
Part 3:
Voting terminates on:
Determination of properties — Solid
2022-02-08
surface shapes
Plastiques — Matériaux décoratifs massifs de revêtement de
surface —
Partie 3: Détermination des propriétés — Produits mis en forme
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 19712-3:2021(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 19712-3:2022
ISO/FDIS 19712-3:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 19712-3:2022
ISO/FDIS 19712-3:2021(E)
Contents Page
Foreword ....................................................................................................................................................................................................................................... vi
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ..................................................................................................................................................................................... 1
3 Terms and definitions .................................................................................................................................................................................... 2
4 Cleaning the test specimen surface .................................................................................................................................................2
4.1 General ........................................................................................................................................................................................................... 2
4.2 Materials ...................................................................................................................................................................................................... 2
4.3 Procedure .................................................................................................................................................................................................... 2
5 Surface defects ....................................................................................................................................................................................................... 2
5.1 Procedure .................................................................................................................................................................................................... 2
5.2 Method of inspection of surface .............................................................................................................................................. 3
5.3 Performance requirements ......................................................................................................................................................... 3
5.4 Test report .................................................................................................................................................................................................. 3
6 Resistance to impact by large-diameter ball ......................................................................................................................... 3
6.1 Principle ....................................................................................................................................................................................................... 3
6.2 Test specimen .......................................................................................................................................................................................... 3
6.3 Procedure .................................................................................................................................................................................................... 3
6.4 Performance requirement ............................................................................................................................................................ 4
6.5 Test report .................................................................................................................................................................................................. 4
7 Lightfastness ............................................................................................................................................................................................................ 5
7.1 Method A ...................................................................................................................................................................................................... 5
7.1.1 Principle ..................................................................................................................................................................................... 5
7.1.2 Apparatus ................................................................................................................................................................................. 5
7.1.3 Test specimen ........................................................................................................................................................................ 5
7.1.4 Procedure ................................................................................................................................................................................. 5
7.1.5 Assessment of specimen and expression of results ............................................................................ 6
7.1.6 Test report ................................................................................................................................................................................ 6
7.2 Method B ...................................................................................................................................................................................................... 6
7.2.1 Principle ..................................................................................................................................................................................... 6
7.2.2 Materials .................................................................................................................................................................................... 7
7.2.3 Apparatus ................................................................................................................................................................................. 7
7.2.4 Standardization of apparatus ................................................................................................................................. 7
7.2.5 Test specimens ..................................................................................................................................................................... 7
7.2.6 Procedure ................................................................................................................................................................................. 7
7.2.7 Expression of results ...................................................................................................................................................... 8
7.2.8 Test report ................................................................................................................................................................................ 8
7.3 Method C (resistance to colour change in light from an enclosed carbon-arc lamp) ............... 9
7.3.1 Principle ..................................................................................................................................................................................... 9
7.3.2 Apparatus ................................................................................................................................................................................. 9
7.3.3 Test specimen ........................................................................................................................................................................ 9
7.3.4 Procedure ................................................................................................................................................................................. 9
7.3.5 Evaluation and expression of results ............................................................................................................... 9
7.3.6 Test report ................................................................................................................................................................................ 9
8 Stain/chemical-resistance test ..........................................................................................................................................................10
8.1 Method A ................................................................................................................................................................................................... 10
8.1.1 Principle .................................................................................................................................................................................. 10
8.1.2 Staining agents .................................................................................................................................................................. 10
8.1.3 Apparatus and materials ......................................................................................................................................... 10
8.1.4 Test specimens .................................................................................................................................................................. 10
8.1.5 Procedures ............................................................................................................................................................................ 14
8.1.6 Expression of results ................................................................................................................................................... 14
8.1.7 Test report ............................................................................................................................................................................. 14
iii© ISO 2021 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 19712-3:2022
ISO/FDIS 19712-3:2021(E)
8.2 Method B ................................................................................................................................................................................................... 15
8.2.1 Principle .................................................................................................................................................................................. 15
8.2.2 Materials ................................................................................................................................................................................. 15
8.2.3 Apparatus .............................................................................................................................................................................. 16
8.2.4 Test specimen ..................................................................................................................................................................... 16
8.2.5 Procedure .............................................................................................................................................................................. 17
8.2.6 Expression of results ................................................................................................................................................... 18
8.2.7 Test report ............................................................................................................................................................................. 19
9 Resistance to cigarette burns .............................................................................................................................................................19
9.1 Method A ................................................................................................................................................................................................... 19
9.1.1 Principle .................................................................................................................................................................................. 19
9.1.2 Materials ................................................................................................................................................................................. 19
9.1.3 Test specimen ..................................................................................................................................................................... 19
9.1.4 Procedure .............................................................................................................................................................................. 19
9.1.5 Expression of results ...................................................................................................................................................20
9.1.6 Test report .............................................................................................................................................................................20
9.2 Method B (simulated test using electric heater) ................................................................................................... 20
9.2.1 Principle .................................................................................................................................................................................. 20
9.2.2 Apparatus .............................................................................................................................................................................. 20
9.2.3 Test specimens .................................................................................................................................................................. 25
9.2.4 Procedure ..............................................................................................................................................................................25
9.2.5 Expression of results ................................................................................................................................................... 27
9.2.6 Test report ............................................................................................................................................................................. 27
10 Resistance to dry heat .................................................................................................................................................................................27
10.1 Method A ................................................................................................................................................................................................... 27
10.1.1 Principle .................................................................................................................................................................................. 27
10.1.2 Materials ................................................................................................................................................................................. 27
10.1.3 Apparatus ..............................................................................................................................................................................28
10.1.4 Test specimen .....................................................................................................................................................................28
10.1.5 Procedure ..............................................................................................................................................................................28
10.1.6 Expression of results ...................................................................................................................................................28
10.1.7 Test report .............................................................................................................................................................................28
10.2 Method B ...................................................................................................................................................................................................29
10.2.1 Principle .................................................................................................................................................................................. 29
10.2.2 Materials .................................................................................................................................................................................29
10.2.3 Apparatus ..............................................................................................................................................................................29
10.2.4 Test specimen .....................................................................................................................................................................29
10.2.5 Procedure ..............................................................................................................................................................................30
10.2.6 Expression of results ................................................................................................................................................... 31
10.2.7 Test report ............................................................................................................................................................................. 32
10.3 Method C ................................................................................................................................................................................................... 32
10.3.1 Test specimen ..................................................................................................................................................................... 32
10.3.2 Procedure .............................................................................................................................................................................. 32
10.3.3 Performance requirements .................................................................................................................................... 32
10.3.4 Test report ............................................................................................................................................................................. 32
11 Resistance to wet heat ................................................................................................................................................................................33
11.1 Method A ................................................................................................................................................................................................... 33
11.1.1 Principle .................................................................................................................................................................................. 33
11.1.2 Materials ................................................................................................................................................................................. 33
11.1.3 Apparatus .............................................................................................................................................................................. 33
11.1.4 Test specimen ..................................................................................................................................................................... 33
11.1.5 Procedure .............................................................................................................................................................................. 33
11.1.6 Expression of results ...................................................................................................................................................33
11.1.7 Test report .............................................................................................................................................................................34
11.2 Method B ...................................................................................................................................................................................................34
11.2.1 Principle ..................................................................................................................................................................................34
11.2.2 Materials .................................................................................................................................................................................34
© ISO 2021 – All rights reserved---------------------- Page: 6 ----------------------
oSIST prEN ISO 19712-3:2022
ISO/FDIS 19712-3:2021(E)
11.2.3 Apparatus ..............................................................................................................................................................................34
11.2.4 Test specimen ..................................................................................................................................................................... 35
11.2.5 Procedure .............................................................................................................................................................................. 35
11.2.6 Expression of results ...................................................................................................................................................35
11.2.7 Test report .............................................................................................................................................................................36
12 Hot/cold-cycle water-resistance test ..........................................................................................................................................36
12.1 Method A — Kitchen sinks ........................................................................................................................................... .............36
12.1.1 Principle .................................................................................................................................................................................. 36
12.1.2 Apparatus and materials ......................................................................................................................................... 36
12.1.3 Test specimen ..................................................................................................................................................................... 37
12.1.4 Procedure .............................................................................................................................................................................. 37
12.1.5 Performance requirement ......................................................................................................................................38
12.1.6 Test report .............................................................................................................................................................................38
12.2 Method B — Other shaped products ................................................................................................................................ 39
12.2.1 Principle .................................................................................................................................................................................. 39
12.2.2 Apparatus and materials ......................................................................................................................................... 39
12.2.3 Test specimen ..................................................................................................................................................................... 39
12.2.4 Procedure ..............................................................................................................................................................................39
12.2.5 Performance requirement ...................................................................................................................................... 39
12.2.6 Test report .............................................................................................................................................................................39
13 Hardness ....................................................................................................................................................................................................................40
14 Ability to be renewed ...................................................................................................................................................................................40
Bibliography .............................................................................................................................................................................................................................41
© ISO 2021 – All rights reserved---------------------- Page: 7 ----------------------
oSIST prEN ISO 19712-3:2022
ISO/FDIS 19712-3:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, P...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.