Filler metal for brazing - Designation (ISO 3677:2024)

This document specifies designations for filler materials for brazing on the basis of their chemical composition. The designation includes their solidus/liquidus temperatures. This document applies to the metallic part of filler materials used in brazing products, for example foils, wires, rods, pastes, flux-coated rods or wires and flux-cored rods or wires.

Zusätze zum Hartlöten - Bezeichnung (ISO 3677:2024)

Métaux d'apport de brasage fort - Désignation (ISO 3677:2024)

Le présent document spécifie les désignations pour les métaux d'apport de brasage fort d’après leur composition chimique. La désignation inclut leurs températures de solidus/liquidus. Le présent document s'applique à la partie métallique des métaux d'apport utilisés pour les produits de brasage fort, par exemple feuillards, fils, baguettes, pâtes, fils ou baguettes enrobés de flux et fils ou baguettes fourrés de flux.

Dodajni materiali za trdo spajkanje - Označevanje (ISO/DIS 3677:2023)

General Information

Status
Published
Publication Date
07-May-2024
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-May-2024
Completion Date
08-May-2024

Relations

Buy Standard

Draft
prEN ISO 3677:2023
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 3677:2023
01-oktober-2023
Dodajni materiali za trdo spajkanje - Označevanje (ISO/DIS 3677:2023)
Filler metal for brazing - Designation (ISO/DIS 3677:2023)
Zusätze zum Hartlöten - Bezeichnung (ISO/DIS 3677:2023)
Métaux d'apport de brasage fort - Désignation (ISO/DIS 3677:2023)
Ta slovenski standard je istoveten z: prEN ISO 3677
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
oSIST prEN ISO 3677:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 3677:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 3677:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3677
ISO/TC 44/SC 13 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-08-15 2023-11-07
Filler metal for brazing - Designation
Métaux d'apport de brasage tendre et de brasage fort — Désignation
ICS: 25.160.50
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3677:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 3677:2023
ISO/DIS 3677:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3677
ISO/TC 44/SC 13 Secretariat: DIN
Voting begins on: Voting terminates on:

Filler metal for brazing - Designation
Métaux d'apport de brasage tendre et de brasage fort — Désignation
ICS: 25.160.50
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 3677:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 3677:2023
ISO/DIS 3677:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Symbols and requirements . 1
2.1 General . 1
2.2 First part . 1
2.3 Second part .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.