EN 14532-2:2004

Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys

This document applies to welding consumables for which supplementary qualification is required. It contains the technical requirements to be fulfilled.
These supplementary tests apply for welding consumables, where the primary qualification is available in accordance with EN 14532-1. The supplementary tests can be carried out at any time without the need to repeat the primary tests.
This document describes the testing methods, the amount of testing and the requirements for supplementary qualification of welding consumables.

Schweißzusätze - Prüfverfahren und Qualitätsanforderungen - Teil 2: Ergänzende Prüfungen und Konformitätsbewertung von Schweißzusätzen für Stahl, Nickel und Nickellegierungen

Dieses Dokument gilt für Schweißzusätze, für die eine ergänzende Eignungsprüfung erforderlich ist. Es
beschreibt die zu erfüllenden technischen Anforderungen.
Diese ergänzenden Prüfungen erstrecken sich auf Schweißzusätze, die bereits nach EN 14532-1 überprüft
worden sind. Die zusätzlichen Prüfungen können jederzeit durchgeführt werden, ohne die Notwendigkeit der
Wiederholung der Erstprüfungen.
Dieses Dokument beschreibt die Prüfverfahren, den Prüfumfang und die Anforderungen an eine ergänzende
Eignungsprüfung von Schweißzusätzen.

Produits consommables pour le soudage - Méthodes d'essai et exigences de qualité - Partie 2: Méthodes complémentaires et évaluation de la conformité des produits consommables pour l'acier, le nickel et les alliages de nickel

Le présent document s�applique aux produits consommables de soudage pour lesquels un agrément
complémentaire est exigé. Elle contient les exigences techniques devant être satisfaites.
Ces essais complémentaires s�appliquent aux produits consommables de soudage pour lesquels la qualification
primaire est disponible conformément à l�EN 14532-1. Les essais complémentaires peuvent être effectués
n�importe quand, sans qu�il soit nécessaire de répéter les essais primaires.
Le présent document décrit les méthodes d�essai, la quantité d�essais et les exigences concernant l�agrément
complémentaire des produits consommables de soudage.

Dodajni materiali za varjenje - Preskusne metode in zahteve po kakovosti - 2. del: Dodatne metode in ocenjevanje skladnosti dodajnih materialov za jeklo, nikelj in nikljeve zlitine

General Information

• Status: Published
• Publication Date: 23-Nov-2004
• Withdrawal Date: 30-May-2005
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 3 - Welding consumables
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 07-Apr-2020
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 14532-2:2005 - Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys

Relations

• Parent: EN 13479:2004 - Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dodajni materiali za varjenje - Preskusne metode in zahteve po kakovosti - 2. del: Dodatne metode in ocenjevanje skladnosti dodajnih materialov za jeklo, nikelj in nikljeve zlitineSchweißzusätze - Prüfverfahren und Qualitätsanforderungen - Teil 2: Ergänzende Prüfungen und Konformitätsbewertung von Schweißzusätzen für Stahl, Nickel und NickellegierungenProduits consommables pour le soudage - Méthodes d'essai et exigences de qualité - Partie 2: Méthodes complémentaires et évaluation de la conformité des produits consommables pour l'acier, le nickel et les alliages de nickelWelding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys77.120.40Nikelj, krom in njune zlitineNickel, chromium and their alloys77.080.20JeklaSteels25.160.20Potrošni material pri varjenjuWelding consumablesICS:Ta slovenski standard je istoveten z:EN 14532-2:2004SIST EN 14532-2:2005en01-marec-2005SIST EN 14532-2:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14532-2November 2004ICS 25.160.20English versionWelding consumables - Test methods and quality requirements -Part 2: Supplementary methods and conformity assessment ofconsumables for steel, nickel and nickel alloysProduits consommables pour le soudage - Méthodesd'essai et exigences de qualité - Partie 2: Méthodescomplémentaires et évaluation de la conformité desproduits consommables pour l'acier, le nickel et les alliagesde nickelSchweißzusätze - Prüfverfahren undQualitätsanforderungen - Teil 2: Ergänzende Prüfungenund Konformitätsbewertung von Schweißzusätzen fürStahl, Nickel und NickellegierungenThis European Standard was approved by CEN on 14 October 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14532-2:2004: ESIST EN 14532-2:2005

page Foreword.3 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Supplementary tests.5 4.1 General.5 4.2 All-weld metal.6 4.2.1 Post weld heat treatment.6 4.2.2 Tensile tests.7 4.2.3 Creep rupture tests.8 4.2.4 Embrittlement tests.9 4.3 Welded joint.10 4.3.1 General.10 4.3.2 Post weld heat treatment.10 4.3.3 Tensile testing.10 4.3.4 Creep rupture tests.10 4.4 Overlay welding.10 4.5 Moisture resistant system.11 5 Retests, certification, extension, modification and prolongation of type qualification.11 Annex A (informative)
Supplementary tests – Overview.12 Annex B (normative)
Post weld heat treatment temperature.13 Annex C (normative)
All-weld metal of consumables for steel – Requirements.14 Annex D (informative)
Test assembly for oxyacetylene welding.15 Annex E (informative)
Reference mean data creep properties.16 Annex F (normative)
Moisture resistant system – Assessment.19 F.1 General.19 F.2 Long-time investigation of the packaging.19 F.3 Diffusible hydrogen investigations after opening of the packaging.19 F.4 Report.19 Annex G (informative)
List of material groups according to CR ISO 15608:2000.20 Bibliography.22
requirements — Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys. EN 14532-3, Welding consumables — Test methods and quality requirements — Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14532-2:2005

1 Scope This document applies to welding consumables for which supplementary qualification is required. It contains the technical requirements to be fulfilled. These supplementary tests apply for welding consumables, where the primary qualification is available in accordance with EN 14532-1. The supplementary tests can be carried out at any time without the need to repeat the primary tests. This document describes the testing methods, the amount of testing and the requirements for supplementary qualification of welding consumables. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 876, Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints. EN 1597-1:1997, Welding consumables — Test methods — Part 1: Test piece for all-weld metal test specimens in steel, nickel and nickel alloys. EN 10002-1, Metallic materials — Tensile testing — Part 1: Methods of test at ambient temperature. EN 10002-5, Metallic materials — Tensile testing — Part 5: method of testing at elevated temperature. EN 10291, Metallic materials — Uniaxial creep testing in tension — Method of test. EN 14532-1:2004, Welding consumables — Test methods and quality requirements — Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys. prEN 14700, Welding consumables — Welding consumables for hard-facing. EN ISO 3690, Welding and allied processes – Determination of hydrogen content in ferritic arc weld metal (ISO 3690:2000). CR ISO 15608:2000, Welding — Guidelines for a metallic material grouping system (ISO/TR 15608:2000). 3 Terms and definitions For the purposes of this document, the terms and definitions of EN 14532-1:2004 apply. 4 Supplementary tests 4.1 General An overview of supplementary tests is listed in Annex A. SIST EN 14532-2:2005
...