EN ISO 2566-2:1999

Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984)

Specifies a method of converting room temperature percentage elongations after fracture obtained on various proportional and non-proportional gauge lengths to other gauge lengths. The conversions are not applicable to cold reduced steels, quenched and tempered steels and non-austenitic steels, or where certain tensile strength ranges and dimensions are exceeded.

Stahl - Umrechnung von Bruchdehnungswerten - Teil 2: Austenitische Stähle (ISO 2566-2:1984)

Dieser Teil von ISO 2566 legt ein Verfahren für die Umrechnung von prozentualen Dehnungswerten nach erfolgtem Bruch bei Raumtemperatur fest, bei dem Bruchdehnungswerte, die bei verschiedenen proportionalen und nicht-proportionalen Meßlängen ermittelt wurden, auf andere Meßlängen umgerechnet werden. Die Gleichung, die den Umrechnungen zugrunde liegt, gilt als zuverlässig, wenn sie auf rostbeständige austenitische Stähle im Zugfestigkeitsbereich von 450 bis 750 N/mm2 und im lösungsbehandelten Zustand angewendet wird.

Acier - Conversion des valeurs d'allongement - Partie 2: Aciers austénitiques (ISO 2566-2:1984)

Prescrit les exigences à respecter par les fabricants de
transformateurs et d'inductances destinés aux équipements
électroniques afin d'obtenir l'agrément de savoir-faire et définit
les programmes d'essais à effectuer sur les composants pour
l'évaluation de ce savoir-faire.

Jekla - Pretvarjanje vrednosti raztezkov - 2. del: Avstenitna jekla (ISO 2566-2:1984)

General Information

• Status: Withdrawn
• Publication Date: 22-Jun-1999
• Withdrawal Date: 21-Dec-2021
• ICS: 77.040.10 - Mechanical testing of metals
• Technical Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Drafting Committee: ECISS/TC 1 - Steel - Mechanical testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Dec-2021
• Ref Project: SIST EN ISO 2566-2:2000 - Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984)

Relations

• Replaced By: EN ISO 2566-2:2021 - Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:2021, Corrected version 2022-05)
• Effective Date: 10-Jun-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2566-2:2000
01-februar-2000
Jekla - Pretvarjanje vrednosti raztezkov - 2. del: Avstenitna jekla (ISO 2566-2:1984)
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984)
Stahl - Umrechnung von Bruchdehnungswerten - Teil 2: Austenitische Stähle (ISO 2566-
2:1984)
Acier - Conversion des valeurs d'allongement - Partie 2: Aciers austénitiques (ISO 2566-
2:1984)
Ta slovenski standard je istoveten z: EN ISO 2566-2:1999
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 2566-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2566-2:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 2566-2:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 2566-2:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 2566-2:2000
2566/Z
International Standard
INTERNATIONAL ORGANIZATION FOR STANOAROIZAT~ONWII~EM~YHAPO~HAR OPfAHM3AL&lfl I-IO CTAH~APTH3ALWWORGANlSATlON INTERNATIONALE DE NORMALISATION
Steel - Conversion of elongation values -
Part 2: Austenitic steels
Acier - Conversion des valeurs d’allongement - Partie 2: A tiers aus tbitiques
First edition - 1984-06-01
UDC 669.14 : 620.172
Ref. No. IS0 2566/2-1984 (E)
Descriptors :
metals, steels, austenitic steels, tests, tension tests, elongation, test specimens.
Price based on 28 pages

---------------------- Page: 5 ----------------------

SIST EN ISO 2566-2:2000
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing International
Standards is carried out through IS0 technical committees. Every member body
- interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 2566/2 was developed by Technical Committee ISO/TC 17,
Steel, and was circulated to the member bodies in April 1983.
It has been approved by the member bodies of the following countries:
Australia Poland
Hungary
Austria India Romania
Belgium South Africa, Rep. of
Iran
Bulgaria Italy Spain
Canada Tanzania
Kenya
China Korea, Dem. P. Rep. of Thailand
Turkey
Czechoslovakia Korea, Rep. of
Finland Mexico United Kingdom
France Netherlands USSR
Germany, F. R. Norway
The member body of the following country expressed disapproval of the document
technical grounds :
Sweden
0 International Organization for Standardization, 1984
Printed in Switzerland

---------------------- Page: 6 ----------------------

SIST EN ISO 2566-2:2000
IS0 2566/2-1984 (E)
INTERNATIONAL STANDARD
Steel
- Conversion of elongation values -
Part 2: Austenitic steels
0 introduction These conversions are not applicable to
a) cold reduced steels;
Several different gauge lengths are commonly in use for the
determination of percentage elongation of steels in tensile
b) quenched and tempered steels;
testing. Fixed gauge lengths of 50, 80, 100 and 200 mm are
used; proportional gauge lengths of k Gare also used for flat
and round test pieces, where k may be one of a number of
c) non-austenitic steels.
values, i.e. 4; 5,65; 8,16; and 11,3.
Neither should they be used where the gauge length exceeds
25a or where the width to thickness ratio of the test piece
The value 5,651/S0 is adopted as the internationally preferred
exceeds 20.
proportional gauge length.
Care should be exercised in the case of strip under 3 mm
Arising from this choice and the existence of specifications
thickness, as the index in the formula given in clause 4 in-
stipulating minimum percentage elongations on different gauge
creases with decreasing thickness; the value to be used shall
lengths, a growing need has been evident for an International
be the subject of agreement between the customer and the
Standard which could be used to convert test results into
supplier.
values based on the different gauge lengths. This part of
IS0 2566 accordingly includes tables of conversion factors,
tables of actual conversions for some of the most commonly
used gauge lengths and elongation values, and figures which
2 Symbols
may also be used for such conversions. When using these con-
versions, however, note should be taken of the limitations on
In this part of IS0 2566, the symbols shown in table 1 are used.
their applicability as stated in clause 1.
Table 1 - List of symbols
While, as indicated, the conversions are considered to
...