iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 15348:2024

(Main)

Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates

Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates

This document specifies the main characteristics and associated test methods for assessing of poly(ethylene terephthalate) (PET) recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of PET recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
This document is applicable without prejudice to any existing legislation.

Kunststoffe - Kunststoff-Rezyklate - Charakterisierung von Polyethylenterephthalat (PET)-Rezyklaten

Dieses Dokument benennt die wichtigsten Eigenschaften und die dazugehörigen Prüfverfahren für die Bewertung von Polyethylenterephthalat (PET)-Rezyklaten, die für die Produktion von Halbzeugen/Fertigprodukten vorgesehen sind.
Es ist dafür vorgesehen (Vertrags-)Partner, die sich mit dem Einsatz von PET-Rezyklaten beschäftigen, bei der Einigung auf Spezifikationen für spezifische oder allgemeine Anwendungen zu unterstützen.
Dieses Dokument behandelt weder die Charakterisierung von Kunststoffabfällen, die von der Reihe EN 15347 abgedeckt werden, noch Themen zur Rückverfolgbarkeit, die von EN 15343 abgedeckt werden.
Dieses Dokument beeinträchtigt bei seiner Anwendung keinerlei geltende Vorschriften.

Plastiques - Plastiques recyclés - Caractérisation des recyclats de poly(éthylène téréphtalate) (PET)

Le présent document spécifie les principales caractéristiques et les méthodes d’essai associées pour évaluer les recyclats de poly(éthylène téréphtalate) (PET) destinés à être utilisés dans la production de produits semi-finis/finis.
Il est destiné à aider les parties concernées par l’utilisation de recyclats de PET pour convenir de spécifications concernant des applications spécifiques ou générales.
Le présent document ne couvre pas la caractérisation des déchets de plastiques, qui est couverte par la série EN 15347, ou les questions de traçabilité qui sont couvertes par l’EN 15343.
Le présent document est applicable sans préjudice de toute réglementation existante.

Polimerni materiali - Reciklirani polimerni materiali - Karakterizacija reciklatov polietilen-tereftalata (PET)

General Information

Status
Published
Publication Date
16-Apr-2024
ICS
13.030.50 - Recycling
83.080.20 - Thermoplastic materials
Technical Committee
CEN/TC 249 - Plastics
Drafting Committee
CEN/TC 249/WG 11 - Plastics recycling
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
17-Apr-2024
Due Date
23-Jun-2023
Completion Date
17-Apr-2024
Mandate
M/584 - Plastics recycling and recycled plastics
Ref Project
kSIST FprEN 15348:2024 - Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates

Relations

Replaces
EN 15348:2014 - Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
Effective Date
18-Jan-2023

Buy Standard

prEN 15348:2022prEN 15348:2022
PreviousNext
Draft
prEN 15348:2022
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 15348:2022
01-maj-2022
Polimerni materiali - Reciklirani polimerni materiali - Karakterizacija reciklatov
polietilen-tereftalata (PET)
Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET)
recyclates
Kunststoffe - Kunststoff-Rezyklate - Charakterisierung von Polyethylenterephthalat
(PET)-Rezyklaten
Plastiques - Plastiques recyclés - Caractérisation des recyclats de poly(éthylène
téréphtalate) (PET)
Ta slovenski standard je istoveten z: prEN 15348
ICS:
13.030.50 Recikliranje Recycling
83.080.20 Plastomeri Thermoplastic materials
oSIST prEN 15348:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15348:2022

---------------------- Page: 2 ----------------------
oSIST prEN 15348:2022


DRAFT
EUROPEAN STANDARD
prEN 15348
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2022
ICS 13.030.50; 83.080.20 Will supersede EN 15348:2014
English Version

Plastics - Recycled plastics - Characterization of
poly(ethylene terephthalate) (PET) recyclates
Plastiques - Plastiques recyclés - Caractérisation des Kunststoffe - Kunststoff-Rezyklate - Charakterisierung
recyclats de poly(éthylène téréphtalate) (PET) von Polyethylenterephthalat (PET)-Rezyklaten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15348:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15348:2022
prEN 15348:2022 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Symbols and abbreviations . 7
5 Characterization of PET recyclates . 7
6 Quality assurance . 10
Annex A (normative) Determination of size and distribution of PET-R flakes by sieving . 11
A.1 General . 11
A.2 Principle .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15344:2021(Main)
Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
SIST EN 15344:2021

This document defines a method of specifying delivery conditions for polyethylene (PE) recyclates.
It gives the most important characteristics and associated test methods for assessing PE recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of polyethylene (PE) recyclates obtained by mechanical recycling to agree on specifications for specific and generic applications.
This document is applicable without prejudice to any existing legislation.
This document does not cover the characterization of plastics wastes (see EN 15347).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16861:2015(Main)
Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET)
SIST-TS CEN/TS 16861:2015

This Technical Specification specifies an analytical method for testing food grade, recycled polyethylene terephthalate (PET). This analytical method provides / is intended to be used as a quality control check. This test identifies and quantifies certain specified contaminants. Such contaminants are referred to as Marker Compounds.
The analytical method is applicable for use on PET samples and products at all stages in the recycling process and will therefore be useful to recycling companies producing commercial, recycled PET for food contact materials and articles, and the manufacturers of such articles.
This Technical Specification is without prejudice to any existing legislation.
NOTE   Marker compounds are known to originate from two sources:
-   from the PET material itself (i.e. residual monomers, degradation products or reaction/breakdown products);
-   from food products that the PET has contacted during its first use.
WARNING: The use of this Technical Specification may involve hazardous materials, operations and equipment.
Persons using this Technical Specification should be familiar with normal laboratory practise. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practises and to ensure compliance with any national regulatory conditions.
IMPORTANT - It is absolutely essential that tests conducted according to this Technical Specification be carried out by suitably trained staff.

  • Technical specification
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15346:2014(Main)
Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
SIST EN 15346:2015

This European Standard defines a method of specifying delivery conditions for poly(vinyl chloride) (PVC) recyclates.
It gives the most important characteristics and associated test methods for assessing of PVC recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of recycled PVC to agree on specifications for specific and generic applications.
This European Standard does not cover the characterization of plastics wastes. See EN 15347.
This European Standard is applicable without prejudice to any existing legislation.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15345:2007(Main)
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
SIST EN 15345:2008

This European Standard defines a method of specifying delivery conditions for Polypropylene (PP) recyclates.
It gives the most important characteristics and associated test methods for assessing a single batch of PP recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of recycled PP to agree on specifications for specific and general applications.
This standard does not cover the characterisation of plastics wastes.  See EN 15347.
This standard is applicable without prejudice to any existing legislation.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15343:2007(Main)
Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
SIST EN 15343:2008

This European Standard specifies the procedures needed for the traceability of recycled plastics. This gives the basis for the calculation procedure for the recycled content of a product.  
This standard is applicable without prejudice to any existing legislation.
NOTE   The procedures are needed to formulate or describe the traceability, while the traceability can be used as a basis for calculating the recycled content

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15347:2007(Main)
Plastics - Recycled Plastics - Characterisation of plastics wastes
SIST EN 15347:2008

This European Standard provides a scheme for the characterisation of plastics wastes, laying out those properties for which the supplier of the waste shall make information available to the purchaser, and identifying test methods where applicable. The scheme provides for a division of information between "Required Data", where a statement is required, even if it is "unclassified", and additional "Optional Data" which the supplier may choose to provide if it adds value to the waste.
This standard is applicable without prejudice to any existing legislation.
NOTE   This standard does not cover the characterisation of plastics recyclates.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15342:2007(Main)
Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
SIST EN 15342:2008

This European Standard defines a method of specifying delivery condition characteristics for polystyrene (PS) recyclates.
It gives the most important characteristics and associated test methods for assessing a single batch of PS recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of recycled PS to agree on specifications for specific and general applications.
This standard does not cover the characterisation of plastics wastes. See EN 15347.
This standard is applicable without prejudice to any existing legislation.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 15344(Main)
Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
oSIST prEN 15344:2024

This document specifies the main characteristics and associated test methods for assessing of polyethylene (PE) recyclates intended for use in the production of semi-finished or finished products.
It is intended to support parties involved in the use of PE recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 18064-3(Main)
Plastics Quality recommendations and basis for specifications for application of plastic recyclates in products - Part 3 : Polypropylene (PP)
oSIST prEN 18064-3:2024

This document provides relevant characteristics and typical values for polypropylene (PP) recyclates intended for groups of defined applications (the product families).
The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1   Examples of designations of plastic recyclates are given in Annex A.
NOTE 2   The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 18064-5(Main)
Plastics - Quality recommendations and basis for specifications for application of plastic recyclates in products - Part 5 : Poly(vinyl chloride) (PVC)
oSIST prEN 18064-5:2024

This document provides relevant characteristics and typical values for poly(vinyl chloride) (PVC) recyclates intended for groups of defined applications (the product families).
The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1   Examples of designations of plastic recyclates are given in Annex A.
NOTE 2   The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day